ADDITIVE TECHNOLOGIES FOR MANUFACTURING COMPOSITE PRODUCTS
Authors:
1.
Bauman Moscow State Technical University
(department “Laser Technology”, Head of the department)
Moskva, Russian Federation
Moskva, Russian Federation
Type:
Article
Pages:
from 18
to 24
Status:
Published
Received:
18.07.2021
Accepted:
01.09.2021
Published:
01.09.2021
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
additive technologies, selective laser melting, coaxial laser melting, composites
Abstract (English):
There are considered two basic additive technologies for metal powder parts growing – selective laser melting and coaxial laser melting.
There are considered two basic additive technologies for metal powder parts growing – selective laser melting and coaxial laser melting.
Keywords:
additive technologies, selective laser melting, coaxial laser melting, composites
additive technologies, selective laser melting, coaxial laser melting, composites
1. Novichenko, D.Yu., Grigoriyats, A.G., Smurov, I.Yu. Manufacturing composites with metal matrix by direct laser application // Engineering Technique. - 2011. - No.11. - pp. 14-18.
2. Grigoriyants, A.G., Kolchanov, D.S., Tretiyakov, R.S., Malov, I.E. Metal powder selective laser melting, thin-walled and grid structure growing // Engineering Technique. - 2015. - No.10. - pp. 6-11.
