Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Submit manuscript
Home / Journals / Actual directions of scientific researches of the XXI century: theory and practice / Volume 2 Issue 5 p. 4
Actual directions of scientific researches of the XXI century: theory and practice
Journal
ACTUAL DIRECTIONS OF SCIENTIFIC RESEARCHES OF THE XXI CENTURY: THEORY AND PRACTICE
Volume, issue
2 № 5 p.4 Published

SEKCIYA «TEHNIKA I TEHNOLOGII V LESNOY PROMYSHLENNOSTI»

EFFECT OF CENTRAL BAR’S THICKNESS ON THE OPTIMUM SIZES OF LUMBER WHEN CUTTING WITH SAVING THREE BARS AND A PAIR OF SIDE BOARDS WHEN CONSIDERING TAPER OF THE LOG
Authors
Agapov Aleksandr, Ivlikova M.
Status
Published
DOI
https://doi.org/10.12737/7051
Pages
from 9 to 13
RATIONING OF POWER CONSUMPTION EDGING MACHINES IN THE WOODWORKING INDUSTRY
Authors
Ageev S.
Status
Published
DOI
https://doi.org/10.12737/7052
Pages
from 13 to 17
ANALYSIS METHODS OF QUALITY MANAGEMENT ROAD PAVEMENT
Authors
Arutyunyan A.
Status
Published
DOI
https://doi.org/10.12737/7053
Pages
from 17 to 21
THE PROBLEMS OF THE TIMBER FLOATING AND TRANSPORTATION OF FLAT RAFT SECTION LINES AND CONTAINERS AT THE CURVED SECTION MINOR RIVERS
Authors
Kudryavtsev G., Barabanov V., Korobitsyn A.
Status
Published
DOI
https://doi.org/10.12737/7054
Pages
from 25 to 29
INFLUENCE OF THE SAW CONSTRUCTION ON FREQUENCY OF HER OWN VIBRATIONS
Authors
Beletskiy M., Sirko Z., Khlud V.
Status
Published
DOI
https://doi.org/10.12737/7055
Pages
from 29 to 33
IMPREGNATION OF WOOD BY HYDROSTATIC METHOD
Authors
Sokolova V., Birman A. R., Krivonogova A.
Status
Published
DOI
https://doi.org/10.12737/7056
Pages
from 33 to 38
LESOVODSTVENNYE-ECOLOGICAL PROBLEMS OF SELECTIVE FELLING
Authors
Yakusheva T., Borozna A., Yazov V.
Status
Published
DOI
https://doi.org/10.12737/7057
Pages
from 38 to 41
VLIYANIE SUCHKOV NA DEFORMATIVNOST' KRUGLYH SORTIMENTOV SOSNY MALYH DIAMETROV PRI SZHATII VDOL' VOLOKON PRI DEYSTVII POVTORNOY STATICHESKOY NAGRUZKI
Authors
Buyskikh N.
Status
Published
DOI
https://doi.org/10.12737/7058
Pages
from 42 to 46
DEVELOPMENT OF MATHEMATICAL MODEL OF THE OPTIMAL DISTRIBUTION OF TRAFFIC VOLUMES OF TIMBER BETWEEN DIFFERENT MODES OF TRANSPORT
Authors
Pilnik Yuliya Nikolaevna, Burmistrova Olga, Matryuk E.
Status
Published
DOI
https://doi.org/10.12737/7059
Pages
from 46 to 50
ANALYSIS OF THE STATUS AND DEVELOPMENT OF FOREST MANAGEMENT IN THE PLOTS OF THE FOREST FUND OF THE REPUBLIC OF KOMI
Authors
Burmistrova Olga, Pilnik Yuliya Nikolaevna
Status
Published
DOI
https://doi.org/10.12737/7060
Pages
from 50 to 54
ENVIRONMENTAL INFLUENCE AND ROAD CONDITIONS TO WORK DRIVERS LESOTRANSPORTA
Authors
Burmistrova Olga, Sushkov Sergey Ivanovich, Arutyunyan A.
Status
Published
DOI
https://doi.org/10.12737/7061
Pages
from 54 to 59
INCREASED DURABILITY OF FRICTION UNITS OF THE HINGED EQUIPMENT FOR FOREST MACHINES
Authors
Prokhorov V., Bykov V., Okladnikov L.
Status
Published
DOI
https://doi.org/10.12737/7062
Pages
from 59 to 62
SERVICE OF LESOTRANSPORTNY UNITS WHEN TRANSPORTING ON WATER OBJECTS
Authors
Vasilev V.
Status
Published
DOI
https://doi.org/10.12737/7063
Pages
from 62 to 67
ANALYSIS OF TEST RESULTS OF RAFT MADE OF FLAT RAFT IN SEVERODVINSK CATCHMENT AREA
Authors
Vasilev V., Barabanov V.
Status
Published
DOI
https://doi.org/10.12737/7064
Pages
from 67 to 72
ACCELERATION OF THE TIMBER TRANSPORT UNITS
Authors
Vatlina Ya., Surov G.
Status
Published
DOI
https://doi.org/10.12737/7065
Pages
from 72 to 76
PERSPECTIVE DIRECTIONS OF RESEARCHES OF CUTTING OF WOOD CHAIN SAWS
Authors
Verner Nadezhda
Status
Published
DOI
https://doi.org/10.12737/7066
Pages
from 77 to 80
THE STUDY RESISTIVITY PULLING SCREWS FLOOR FLOORING FROM WOOD-POLYMER COMPOSITE MATERIAL
Authors
Galiev I.
Status
Published
DOI
https://doi.org/10.12737/7067
Pages
from 81 to 83
ЕNERGY EFFICIENT DRYING AND WET THERMAL TREATMENT OF CRUSHED WOOD
Authors
Nazipova F., Galyavetdinov N. R., Khasanshina R.
Status
Published
DOI
https://doi.org/10.12737/7068
Pages
from 84 to 87
SHORT LOG TECHNOLOGY OF WOOD HARVESTING
Authors
Derbin Vasiliy, Derbin Mikhail Vasil'evich
Status
Published
DOI
https://doi.org/10.12737/7069
Pages
from 87 to 91
IMPROVEMENT OF THE TECHNOLOGY OF WOOD HARVESTING WITH UNDERGROWTH PRESERVATION
Authors
Derbin Vasiliy, Derbin Mikhail Vasil'evich
Status
Published
DOI
https://doi.org/10.12737/7070
Pages
from 91 to 96
DESIGN OF SPRING-TONGUE DIRECTING FOR NARROW BAND SAW
Authors
Derbin Vasiliy, Derbin Mikhail Vasil'evich
Status
Published
DOI
https://doi.org/10.12737/7071
Pages
from 96 to 99
TO THE QUESTION OF REDUCING TEMPERATURE INFLUENCE ON THE WOODWORKING TOOLS
Authors
Derbin Mikhail Vasil'evich, Derbin Vasiliy
Status
Published
DOI
https://doi.org/10.12737/7072
Pages
from 99 to 102
QUALITY ASSESSMENT ENGINE OIL AND ITS REPLACEMENT UNDER ACTUAL STATE
Authors
Timokhov R., Evdokimova K., Timokhova Oksana
Status
Published
DOI
https://doi.org/10.12737/7073
Pages
from 103 to 106
INVESTIGATION OF THE ADHESION OF PAINT COATINGS
Authors
Ermachkova N., Lobeko E.
Status
Published
DOI
https://doi.org/10.12737/7074
Pages
from 107 to 110
OPERATIONAL PLANNING AND CONTROL OF OPERATING MODES OF THE SET OF MACHINES IS THE BASIS OF OBTAINING THE MAXIMUM OUTPUT
Authors
Ryzhikova Elena, Teremkova I., Zaikin Anatoliy Nikolaevich, Merkelov V.
Status
Published
DOI
https://doi.org/10.12737/7075
Pages
from 110 to 115
THE MATHEMATICAL DESCRIPTION OF THE STAGE OF PYROLYSIS WITH CONDUCTIVE HEAT SUPPLY DURING GASIFICATION OF WOOD RAW MATERIAL
Authors
Ismagilova L., Sadrtdinov A.
Status
Published
DOI
https://doi.org/10.12737/7076
Pages
from 115 to 119
THE DEVELOPMENT OF TECHNOLOGY FOR WOOD STRUCTURAL MATERIAL BASED ON GYPSUM, FOAM AND WOOD PARTICLES
Authors
Isyangulova D., Filippova F.
Status
Published
DOI
https://doi.org/10.12737/7077
Pages
from 119 to 123
THE STUDY OF HYDRODYNAMIC CHARACTERISTICS OF THE TRANSPORT UNITS OF THE FLEXIBLE CONTAINERS WITH CHIPS
Authors
Karpachyev Syergyey, Shmyrev D.
Status
Published
DOI
https://doi.org/10.12737/7078
Pages
from 123 to 130
THE USING OF NANOCRYSTAL CELLULOSE IN THE COURSE OF WOOD MODIFYING
Authors
Kirillov F.
Status
Published
DOI
https://doi.org/10.12737/7079
Pages
from 130 to 134
CHOICE OF ASSESSMENT OF THE IMPACT OF EXTERNAL CONDITIONS MOVEMENT ON THE CALCULATION OF LOADED ELEMENTS OF TRANSMISSION TRACKED FOREST MACHINE
Authors
Klubnichkin Evgeniy Evgen'evich, Klubnichkin Vladislav Evgen'evich, Bukhtoyarov Leonid
Status
Published
DOI
https://doi.org/10.12737/7080
Pages
from 134 to 138
METHODOLOGY OF THEORETICAL CALCULATIONS OF THE FORCES, ACTING ON THE CUTTING EDGE OF AGE AND INCREMENTAL BOERS
Authors
Klyuev G.
Status
Published
DOI
https://doi.org/10.12737/7081
Pages
from 138 to 142
ORGANIZATION OF TRANSPORT DEVELOPMENT OF THE FORESTS TAKING INTO ACCOUNT CLIMATIC FACTORS
Authors
Kovalenko T.
Status
Published
DOI
https://doi.org/10.12737/7082
Pages
from 143 to 146
CONDITIONS OF APPLICATION NON-DESTRUCTIVE QUALITY ASSESSMENT OF SAWN TIMBER
Authors
Koval V., Mazurchuk S.
Status
Published
DOI
https://doi.org/10.12737/7083
Pages
from 147 to 150
THE SPECIFIC POWER INPUTS AND EXPENDITURES OF LABOUR OF PROCESSОRS
Authors
Kolominova M.
Status
Published
DOI
https://doi.org/10.12737/7084
Pages
from 151 to 154
ANALYSIS OF THE EFFECT OF SAWING PATTERNS TO THE DISPERSION OF THE SAWN WOOD DIMENSIONS
Authors
Korelskaya M.
Status
Published
DOI
https://doi.org/10.12737/7085
Pages
from 154 to 158
ON NEW APPROACH FOR CALCULATING ANNUAL ALLOWABLE CUT FOR INTENSIVE SUSTAINABLE FOREST MANAGEMENT
Authors
Zarodov A., Golubev V., Korosov A., Rodionov A., Markovskiy A.
Status
Published
DOI
https://doi.org/10.12737/7086
Pages
from 158 to 162
INFLUENCE OF CLIMATIC FACTORS ON WOOD TRANSPORT
Authors
Kotochigov M.
Status
Published
DOI
https://doi.org/10.12737/7087
Pages
from 162 to 166
CUTTING WOOD WITH INNER SAPWOOD
Authors
Krasnova V.
Status
Published
DOI
https://doi.org/10.12737/7088
Pages
from 166 to 170
METHODS OF DEFINITION VOLUMETRIC OUTPUT COEFFICIENT OF WORKPIECES FROM PINE SAW-TIMBERS
Authors
Krivoshchekov Nikita
Status
Published
DOI
https://doi.org/10.12737/7089
Pages
from 171 to 174
TECHNOLOGICAL MACHINES FOR CUT-TO-LENGTH HARVESTING IN WOOD-CUTTING AREAS
Authors
Kulminskiy A.
Status
Published
DOI
https://doi.org/10.12737/7090
Pages
from 175 to 178
INFORMATION STREAMS ON SITES OF SORTING FOREST PRODUCTS
Authors
Kunitskaya D.
Status
Published
DOI
https://doi.org/10.12737/7091
Pages
from 179 to 182
ACTUAL PROBLEMS OF TIMBER PRODUCTION IN RUSSIA AT THE TURN OF 2015
Authors
Kunitskaya Ol'ga
Status
Published
DOI
https://doi.org/10.12737/7092
Pages
from 183 to 186
A MATHEMATICAL MODEL OF THE CENTRIFUGAL IMPREGNATION DRE-WOOD, TAKING INTO ACCOUNT THE VISCOSITY AND DENSITY OF THE IMPREGNATING COMPOSITION
Authors
Kunitskaya Ol'ga, Goncharov Yu.
Status
Published
DOI
https://doi.org/10.12737/7093
Pages
from 187 to 190
PROMISING NEW TECHNOLOGIES IN TAPE LUMBERING
Authors
Farberovich O., Maksimenkov Alexey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/7094
Pages
from 191 to 196
DETERMINATION OF THE YIELD OF LUMBER PRODUCED OF LOGS, WITH SEVERAL QUALITY AREAS
Authors
Kholkina N., Razumov E., Pekmenov V., Mikryukova Elena
Status
Published
DOI
https://doi.org/10.12737/7095
Pages
from 196 to 200
KINEMATIC ANALYSIS OF LEVER SYSTEMS FORESTRY AND CONSTRUCTION MANIPULATORS
Authors
Teleshev S., Moiseev G., Kolesnikov P.
Status
Published
DOI
https://doi.org/10.12737/7096
Pages
from 200 to 204
THE MATHEMATICAL MODELLING OF SPEED FOR WOOD FIBER MASS FORMATION PROCESS BY WET METHOD
Authors
Bagaev Andrei, Molchanova K., Ilyushchenko V.
Status
Published
DOI
https://doi.org/10.12737/7097
Pages
from 204 to 210
THE ADJUSTMENT PROCESS MODE OF FINISHING ARTIFICIAL ANTIQUE FURNITURE
Authors
Novoselova Irina
Status
Published
DOI
https://doi.org/10.12737/7098
Pages
from 210 to 213
THROUGH INFORMATION SUPPORT OF THE DESIGN AND PRODUCTION
Authors
Nyrkov D. E.
Status
Published
DOI
https://doi.org/10.12737/7099
Pages
from 214 to 215
ANALYSIS OF MATERIALS FOR COVERING FURNITURE FACADES
Authors
Ozhiganova E.
Status
Published
DOI
https://doi.org/10.12737/7100
Pages
from 215 to 218
INCREASING THE THERMAL CONDUCTIVITY OF THE WOOD DURING METALLIZING
Authors
Parinov D., Shamaev Vladimir
Status
Published
DOI
https://doi.org/10.12737/7101
Pages
from 218 to 222
MODERN TECHNOLOGY RAFTING ON THE RIVERS WITH INSUFFICIENT DEPTH
Authors
Perfilev P.
Status
Published
DOI
https://doi.org/10.12737/7102
Pages
from 222 to 225
THE APPLICATION METHODS OF PROBABILISTIC ANALYSIS FOR IMPROVEMENT OF END-TO-END TECHNOLOGICAL TIMBER PROCESSES IN INVESTIGATIONS OF PETROZAVODSK STATE UNIVERSITY
Authors
Petrina O.
Status
Published
DOI
https://doi.org/10.12737/7103
Pages
from 226 to 229
TO ACCELERATE THE DRYING OF SOLID HARDWOODS
Authors
Koval V., Pinchevskaya E., Boryachinskiy V.
Status
Published
DOI
https://doi.org/10.12737/7104
Pages
from 230 to 235
TECHNOLOGY PROCESS AUTOMATION DISPENSING SHAVINGS
Authors
Polyakov S.
Status
Published
DOI
https://doi.org/10.12737/7105
Pages
from 235 to 240
APPROVEMENT OF THE WINTER BUNDLING RAFTS COMPOSED OF TWO-STOREYED RAFTING UNITS UNDER THE WORKING CONDITIONS
Authors
Posypanov S.
Status
Published
DOI
https://doi.org/10.12737/7106
Pages
from 240 to 244
INTRODUCTION OF WINTER RAFTS FORMING TECHNOLOGY FOR SMALL LOGGING ENTERPRISES
Authors
Posypanov S.
Status
Published
DOI
https://doi.org/10.12737/7107
Pages
from 244 to 248
INCREASE OF WEAR RESISTANCE FOR RENOVATION OF PARTS OF WOOD FLAKER’S EQUIPMENT
Authors
Prozorov Yaroslav
Status
Published
DOI
https://doi.org/10.12737/7108
Pages
from 248 to 252
METHODS OF PRODUCTION OF THE POWDERED CELLULOSE USING STEAM EXPLOSION PROCESSING
Authors
Akhmetshin I., Prosvirnikov D. B., Gaynullina D.
Status
Published
DOI
https://doi.org/10.12737/7109
Pages
from 252 to 256
ANALYTICAL STUDY OF THE PROCESS INTERACTION OF WHEEL SKIDDING MACHINES WITH A BUNDLE OF WHIPS AND DRAGGED
Authors
Protas P., Klokov Dmitriy Viktorovich
Status
Published
DOI
https://doi.org/10.12737/7110
Pages
from 256 to 260
BASIC FEATURES OF PRODUCTION TECHNOLOGICAL PREPARATION ON SMALL FURNITURE ENTERPRISES
Authors
Rubleva Olga
Status
Published
DOI
https://doi.org/10.12737/7111
Pages
from 260 to 264
PROBLEMS OF TECHNOLOGICAL DEVELOPMENT OF TIBER INDUSTRY OF USSR DURING THE PERIOD OF PERESTROIKA (1985-1990)
Authors
Savitskiy A.
Status
Published
DOI
https://doi.org/10.12737/7112
Pages
from 264 to 268
MATHEMATICAL MODEL OF THE PRODUCTION OF METHANOL FROM WOOD WASTE ON MEANS OF THERMOCHEMICAL PROCESSING
Authors
Sadrtdinov A., Galeev T.
Status
Published
DOI
https://doi.org/10.12737/7113
Pages
from 268 to 271
PROCESSING TECHNOLOGY THERMOMODIFIED WOOD
Authors
Bikmullina K., Salimgaraeva R., Salimgaraev R.
Status
Published
DOI
https://doi.org/10.12737/7114
Pages
from 272 to 275
PERFORMANCE ANALYSIS SKIDDERS IN THE MIDDLE TAIGA KOMI REPUBLIC
Authors
Svoykin V. F., Molchanova A.
Status
Published
DOI
https://doi.org/10.12737/7115
Pages
from 275 to 279
TO THE QUESTION ABOUT THE NEED TO DEVELOP A UNIFIED CHIPPER
Authors
Sivakov V., Luporeva I.
Status
Published
DOI
https://doi.org/10.12737/7116
Pages
from 279 to 283
STAND FOR TESTING OF PACKAGING BANDS AND BAND BINDING MACHINES IN WOOD-WORKS
Authors
Sirko Z., Leonov Yu.
Status
Published
DOI
https://doi.org/10.12737/7117
Pages
from 283 to 286
ANALYSIS OF EXISTING FACILITIES LESOTRANSPORTNYH
Authors
Smirnov M.
Status
Published
DOI
https://doi.org/10.12737/7118
Pages
from 286 to 290
ORGANIZATION OF TRAIN WITH HINGED HYDROMANIPULATOR
Authors
Smirnov M.
Status
Published
DOI
https://doi.org/10.12737/7119
Pages
from 290 to 294
WEIGHT DISTRIBUTION WAD WHIP TOTAL LENGTH ON A CONIC ARTICULATED ROAD TRAINS
Authors
Smirnov M.
Status
Published
DOI
https://doi.org/10.12737/7120
Pages
from 294 to 298
MODERN CONSTRUCTION COMPOSITE MATERIALS ON THE BASIS OF WOOD WASTE
Authors
Stepanova T., Gaynullina A.
Status
Published
DOI
https://doi.org/10.12737/7121
Pages
from 299 to 303
FORMING OF A RAFT COMPOSED OF THE FLAT TIMBER RAFTING UNITS
Authors
Surov G., Shtaborov D.
Status
Published
DOI
https://doi.org/10.12737/7122
Pages
from 303 to 307
DEVELOPMENT OF ENVIRONMENTAL MONITORING DURING CONSTRUCTION AND OPERATION OF THE ROAD CLOSE TO THE FOREST
Authors
Status
Published
DOI
https://doi.org/10.12737/7123
Pages
from 307 to 311
MANAGEMENT MACRO AND MICRO LOGISTICS PROCESSES IN THE FOREST COMPLEX
Authors
Status
Published
DOI
https://doi.org/10.12737/7124
Pages
from 312 to 316
CURRENT AND FUTURE PLANNING OF TRANSPORT PROCESSES IN THE FOREST COMPLEX
Authors
Sushkov Sergey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/7125
Pages
from 316 to 320
METHODS DATA OPTIMIZATION IN THE DIAGNOSTIC PROCESS STATE TRANSPORTATION TECHNOLOGICAL MACHINES
Authors
Sushkov Sergey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/7126
Pages
from 320 to 324
WAYS TO ADDRESS TRANSPORT ACCESSIBILITY WOODLANDS
Authors
Ermolov Yu., Sushkov Sergey Ivanovich, Ukhanov A.
Status
Published
DOI
https://doi.org/10.12737/7127
Pages
from 325 to 329
DIFFERENT FORMS OF APPLICATION TRANSPORT LINKS TO TIMBER COMPANIES
Authors
Sushkov Sergey Ivanovich, Burmistrova Olga
Status
Published
DOI
https://doi.org/10.12737/7128
Pages
from 330 to 333
THE QUESTION USE NEW INFORMATION TECHNOLOGIES IN THE FORESTRY COMPLEX
Authors
Sushkov Sergey Ivanovich, Ermolov Yu.
Status
Published
DOI
https://doi.org/10.12737/7132
Pages
from 333 to 337
TO THE QUESTION OF TECHNOLOGY OF PROCESSING THE PRESSED WOOD
Authors
Trishina Tatyana
Status
Published
DOI
https://doi.org/10.12737/7134
Pages
from 341 to 344
THERMAL PROCESSING OF BIOMASS OF THE LIGNIN
Authors
Arslanova A., Savelev A., Romancheva I., Tuntsev D., Kitaev S.
Status
Published
DOI
https://doi.org/10.12737/7135
Pages
from 344 to 348
THE TECHNOLOGICAL SCHEME OF RECEIVING BIOPLASTIC ON THE BASIS OF THE LIGNIN
Authors
Garaeva I., Khayrullina M., Savelev A., Tuntsev D., Romancheva I.
Status
Published
DOI
https://doi.org/10.12737/7136
Pages
from 348 to 352
RESULTS OF EXPERIMENTAL STUDIES OF THE GASIFICATION PROCESS LIQUID PRODUCTS FAST PYROLYSIS OF WASTE WOOD FOR THE WOOD INDUSTRY
Authors
Romancheva I., Kasimov A., Khismatov R., Tuntsev D., Savelev A.
Status
Published
DOI
https://doi.org/10.12737/7137
Pages
from 352 to 356
PRODUCTION PROBLEMS OF CLEAVED PULPWOOD IN RUSSIA
Authors
Frolov Ivan Sergeevich, Bacherikov Ivan
Status
Published
DOI
https://doi.org/10.12737/7138
Pages
from 357 to 360
THE TECHNOLOGICAL SCHEME BRICKETTING CHARCOAL
Authors
Khayrullin I., Khayrullina M., Savelev A., Romancheva I.
Status
Published
DOI
https://doi.org/10.12737/7139
Pages
from 360 to 363
TECHNOLOGY OF PRODUCTION OF STRUCTURAL PANELS WITH ENHANCED THERMAL PROPERTIES BASED ON THE PROCESSED WOOD FILLER
Authors
Khayrullina E.
Status
Published
DOI
https://doi.org/10.12737/7140
Pages
from 363 to 367
USE OF GAS-GENERATING UNIT AT CUTTING AREA WORKS
Authors
Tsygarova M.
Status
Published
DOI
https://doi.org/10.12737/7141
Pages
from 367 to 370
ON THE SURFACE QUALITY OF ROUND LOGS FOR A WOODEN HOUSE
Authors
Yamshchikov E., Matveev N., Chemodanov A., Safyanov M.
Status
Published
DOI
https://doi.org/10.12737/7142
Pages
from 371 to 374
MACHINE FOR PRODUCING VENEER ROTARY MOTION CUTTING TOOL
Authors
Gaynullin Ren, Gaynullin Rish Harisovich, Chemodanov A., Anisimov S.
Status
Published
DOI
https://doi.org/10.12737/7143
Pages
from 375 to 379
OF DAMAGE TO REMAINING TREES TRUNKS DURING SKIDDING STEMS TO DISCONTINUITIES LOGGING
Authors
Bondarenko A., Chernykh Aleksandr, Abramov Vitaliy Viktorovich
Status
Published
DOI
https://doi.org/10.12737/7144
Pages
from 379 to 382
A PROMISING DEVICE FOR THE COMBINED TIMBER IN EXTREME CONDITIONS LOGGING
Authors
Shirnin A.
Status
Published
DOI
https://doi.org/10.12737/7145
Pages
from 383 to 385
THE SOLUTION ALGORITHM AND SOFTWARE IMPLEMENTATION OF THE PROBLEM OF DETERMINING THE STATE OF THE DEFORMED FRAME WHEELED FOREST MACHINE
Authors
Shnyakov A.
Status
Published
DOI
https://doi.org/10.12737/7146
Pages
from 386 to 389
METHODS OF DEVELOPMENT OF MATHEMATICAL MODELS FOR FINITE ELEMENT CALCULATION OF STRAIN STATE AND IMPROVING THE DESIGN OF THE FRAME OF WHEELED FORESTRY MACHINES
Authors
Shnyakov A.
Status
Published
DOI
https://doi.org/10.12737/7147
Pages
from 390 to 393
DIMENSIONING OF A LINES COMPOSED OF THE FLAT TIMBER RAFTING UNITS WHEN MOVING ON CURVED SECTIONS OF RIVERS
Authors
Shtaborov D., Perfilev P.
Status
Published
DOI
https://doi.org/10.12737/7148
Pages
from 394 to 398
XML AND VRML TECHNOLOGIES USING FOR THE FURNITURE OBJECTS REENGINEERING STAGE IMPLEMENTATION IN THE CABINET FURNITURE DESIGN
Authors
Shchekaleva A.
Status
Published
DOI
https://doi.org/10.12737/7149
Pages
from 398 to 402
THE COMPATIBILITY OF FOREST MACHINES WITH FOREST ENVIRONMENT
Authors
Shcherbakova E.
Status
Published
DOI
https://doi.org/10.12737/7150
Pages
from 402 to 404
THE EQUIPMENT ELABORATION WITH PROGRAMMED CONTROL FOR PROFILE MILLING OF PERIPHERAL SEGMENTS
Authors
Fomin A.
Status
Published
DOI
https://doi.org/10.12737/7151
Pages
from 404 to 409
FOREST TECHNOLOGIGY LOGISTICS
Authors
Bazarov S., Solovev A.
Status
Published
DOI
https://doi.org/10.12737/7166
Pages
from 21 to 24
ACTUAL PROBLEMS OF TIMBER PRODUCTION IN RUSSIA AT THE TURN OF 2015
Authors
Tikhonov I., Grigorev I., Nikiforova A
Status
Published
DOI
https://doi.org/10.12737/7167
Pages
from 337 to 341
Quantity of pages
410

This work is licensed under Creative Commons Attribution 4.0 International



Submit manuscript

The contact persons
Responsible secretary
Shanin Igor
anni_vgltu@mail.ru
+7 (473) 253-76-51
© zh-szf.ru
Agreement Personal data protection and processing policy Support Powered by Editorum, 2025 Instructions
Login or Create
* Forgot password?