Periodicity of the journal - monthly; volume – up to 100 pages.
REQUIREMENTS
for scientific content in the journal
"SCIENCE-INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING
(Unsatisfying publications are given back for revision!!!)
The following scientific matters passed for press in electronic format:
1. The text of the article (to a maximum of 15 sheets) in the form of a Microsoft Word file. The text of the article should be strictly indented, e.g. (but not limited to): Introduction; Materials and methods; Results and discussion; Conclusions.
2. Paginated icons in the form of a Microsoft Word file.
3. Source illustrations in the form of scan graphics files (ext.: jpg, .tif, png, etc.) with a resolution of 400 or more dots per inch (dpi). The inscriptions for figures are in the Roman font (neither in italics nor in semi-bold type), capitalized. Font-type Times, body size 10.
4.Information about the authors should include his/her surname, first name, patronymic, academic degree, academic status, the name of the organization (institution) or its subdivision, the author’s place of work or study, address of the organization (institution), its subdivision (place of the author's work or study (city and country), job title, contact phone and e-mail, Open Researcher and Contributor ID (ORCID) (if any) in the format of a Microsoft Word file.
5. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This metadata is given in the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the writing of the paper is briefly described (idea, collection of material, processing of material, paper writing, scientific editing of the text, etc.).
6. Information of no conflict of interest or if there is one, so the details, if any, are given at the end of the article. Example: Contribution of authors: all authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interest.
7. Expert opinion for the possibility of open publication.
8. Redacted paper text for blind review. All information about the authors, place of work, financing, contribution of the authors and no conflict information is deleted.
Text layout
The paper text should be structured as follows:
1. Information on the article:
1.1. Article type: scientific article, review article, editorial article, discussion article, editing note, book review, article review, etc.
1.2. UDC index (can be found at http://teacode.com/online/udc/).
1.3. The title of the article (the title of the article should be succinct and informative).
1.4. Surname, first name, patronymic of the authors in full.
1.5. Address data of the authors (name of the organization (institution), its subdivision, place of the author's work or study, address of the organization (institution), its subdivision, place of the author's work or study (city and country), e-mail, ORCID).
1.6. The abstract is formed according to the State Standard R 7.0.99-2018. The volume of the abstract of the article is 200-250 words. The word "Abstract" is given before the annotation. The abstract should briefly reflect the essence of the article: research methods, results obtained, etc.
1.7. Keywords (word combinations) should correspond to the topic of the article and reflect its subject, terminological area. They do not use generalized and polysemous words, as well as combinations with participial phrases. The number of keywords (word combinations) should be at least 3 and maximum of 7 words (word combinations). They are given, preceded by the words "Keywords:", and separated from each other by commas, but not put a full stop in the end.
1.8. If necessary, after the keywords, acknowledgements are given to organizations (institutions), scientific supervisors and other persons who assisted in the preparation of the article, information about grants, funding for the preparation and publication of the article, projects, research works within or based on the results contributing to the publication of the article. This information is given with the preceding word "Acknowledgements:".
If necessary, information about the financing of the research, preparation and publication of the article can be given separately with the preceding word "Research Support Grants:".
2. The body of the article. Font – Times New Roman, body size 12, interval 1.5. Strict pagination is required. The dimension of all units must be given in the SI system (International System of Units). Formulas must be typed in the Microsoft Equation 3.0 formula editor.
3. References are given according to the State Standard R. 7.0.5-2008 and should contain at least 10 items. A minimum of 15 titles are allowed in the review article. The list of endnote bibliographic references includes entries only to the resources, mentioned or quoted in the body text of the article. Bibliographic entries in the list of endnote bibliographic references are numbered and arranged in the order of quarry for citations in the paper text. References (works cited) are allowed on or after 1970, references for over 10 years are allowed to a maximum of 10%. Self-citation should not exceed 40% of the total number of titles. If the sources have a digital object identifier (DOI) and/or an eLibrary Document Number (END), specifying identifiers is required.
4. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the paper writing is briefly given as follows (idea, collection, processing of material, paper writing, scientific editing of the text, etc.).
5. Information concerning no conflict of interest or the details of the conflict, if any.
Example: Contribution of authors. All authors have made an equivalent contribution to the preparation of the publication. The authors declare there is no conflict of interest.
An example of the article presentation
Editor-in-chief of the journal "Science-intensive technologies in mechanical engineering"
Honored Scientist and Engineer, Doctor of Technical Sciences, Professor A.G. Suslov
DECLARATION OF PUBLICATION ETHICS
The editorial policy of the journal Science Intensive Technologies in Mechanical Engineering is based on the traditional ethical principles of the Russian scientific journals and on the international ethical standards of editors and publishers in conducting, describing, editing and publishing the results of scientific work. The principles of the Committee on Publication Ethics (COPE), the basic principles of the Declaration "Ethical Principles of Scientific Publications" of the Committee on Publication Ethics of the Association of Science Editors and Publishers (ASEP), as well as the provisions of Chapter 70 "Copyright" of the Civil Code of the Russian Federation are the basis of the Editorial Policy of the Journal.
The editorial board of Science Intensive Technologies in Mechanical Engineering adheres its activities to the provisions of WMA Declaration of Helsinki - Ethical Principles for Medical Research Involving Human Subjects and does its best to ensure compliance with ethical norms and rules for data collection for research conducted with the participation of people. Violation of publication ethics of the journal results in refusal to publish.
1. Responsibilities of the publisher
The publisher is responsible for the publication of copyrighted works.
The publisher and the founder should follow the principles and procedures that facilitate the implementation of ethical standards of publications by editors, reviewers and authors. They have no right to influence the editorial policy of the journal. The editorial board of Science Intensive Technologies in Mechanical Engineering makes an independent decision on the expediency of publishing a paper without interference of the publisher and founder.
The publisher and the founder should provide legal and other support to the editorial board, if necessary, including investigations of cases of unfair research and publication practices, and should facilitate the resolution of these issues. They ensure the timely release of journal issues. The publisher and the founder, subject to the agreement with the editor-in-chief, publish edits, explanations and reject papers in which violations of scientific ethics or critical errors have been identified.
In cases of violation of publication ethics on the part of the editor, author or reviewer, a mandatory investigation is required. This applies to both published and unpublished materials. The editorial board should demand clarification without involving persons who may have a conflict of interest with one of the parties. If the material containing significant inaccuracies has been published, it should be corrected immediately in a form accessible to readers and indexing systems. In order to ensure the reliability of the published data, if indisputable errors are found in the work, it is possible to publish corrections, clarifications, rejections and apologies as soon as possible.
All parties should avoid conflicts of interests in any form at all stages of publishing the article. In the case of a conflict of interest in any form, the person who first discovered such a conflict should immediately inform the editorial board. The same applies to any violations of generally accepted ethical norms and rules.
In case of ethical claims concerning articles published in the journal, the editor-in-chief, together with the publisher and the founder, take appropriate measures based on "Retraction Guidelines" of the Committee on Publication Ethics (COPE). These measures include conducting an investigation of the fact of unethical behavior by the editorial board of Science Intensive Technologies in Mechanical Engineering, interaction with the authors of the scientific paper and argumentation of the relevant complaint or the claim of the applicant, and also imply interaction with relevant organizations and research centers for cooperation in cases of unfair research and retraction of the publication.
2. Responsibilities of authors
When submitting a paper to the editorial office, authors should adhere to a responsible approach and be aware of personal responsibility for the novelty and reliability of the results of scientific research.
The decision to accept papers for publication is based on:
- the originality of the text;
- scientific relevance and novelty of the material;
- reliability of statistical data and research results;
- compliance of papers with the journal profile;
- objectivity of arguments.
By submitting a paper to the editorial board, the authors thereby confirm that this paper is original, has not been previously published and is not under consideration by the editorial board of another journal. The results discussed in the paper should meet the criterion of reproducibility by other researchers. All data processing methods, as well as the logic of their interpretation, should be absolutely transparent.
All materials submitted to the editorial office are checked using "Antiplagiat" system (https://tu-bryansk.antiplagiat.ru/). If numerous references (duplicate publication, plagiarism, self-plagiarism, unfair citation, etc.), the editorial board has the right to refuse all co-authors further cooperation.
Authors can use financial support when publishing their research (all sources of funding should be indicated by the authors in the paper).
Authors should provide only authentic facts and information in the manuscript; do not use information obtained privately (in correspondence, conversation, discussion with third parties or in the provision of confidential services), without written permission of a third party; do not allow fabrication and falsification of data.
All persons who have made a significant contribution to the research should be listed as co-authors of the paper. The author undertakes to indicate correctly all scientific and other sources in the reference list that he used during the preparation of the paper and which had a significant impact on the results of the study. If the author discovers significant errors or inaccuracies in the publication, he must inform the editor of the journal and interact with him to correct the manuscript as soon as possible.
3. Responsibilities of the editor
The editorial board is fully responsible and has the authority to reject or accept papers for publication and should not have a conflict of interest with the materials that are rejected or accepted for publication. The editorial board ensures the confidentiality of the submitted materials until they are accepted for publication. It decides which of the submitted articles should be published based on the results of the verification of compliance with the conditions of publication and the results of the review.
The editorial board of the journal evaluates only the scientific content of the article, regardless of race, nationality, origin, citizenship, gender, occupation, place of work, residence of the author, as well as his political, philosophical, religious and other views.
The editorial board guarantees that the materials of the scientific paper rejected from publication will not be used in the works of the editorial board members without written permission of the author. The final texts of papers should be agreed with the authors. The editorial board protects the reputation of the authors and takes seriously all cases of plagiarism and other facts of unfair behavior when publishing a scientific paper.
The editorial board under no circumstances should force authors to cite articles published in Science Intensive Technologies in Mechanical Engineering or other periodicals as a necessary condition to accept the manuscript for consideration and publication.
Carrying out activities, editors rely on the editorial board. The general management of the editorial office is carried out by the editor-in-chief and deputy editor-in-chief. The editorial board constantly cooperates with other publishers and industry associations on various issues, including ethical issues.
4. Responsibilities of peer reviewers
The reviewers of the journal follow exclusively "double blind" peer review policy. Reviewers carry out a scientific examination of the author's materials and their actions should be unbiased, which means the implementation of the following principles.
The editorial board ensures that reviewers are anonymous.
Reviewers are required to have sufficient qualifications for an expert assessment of the content of a scientific paper. Reviewers should participate in forming the editorial policy of the journal, give an objective assessment (personal criticism of the author is unacceptable). They should submit a review within the time limits specified by the editorial board of the journal. Reviewers should clearly express their opinion giving arguments. Unpublished information obtained from the manuscripts submitted for consideration cannot be used for personal purposes without the written permission of the authors.
If the reviewer identifies incorrect, erroneous provisions or distorted data, he reports this to the editorial board of the journal in the prescribed manner so that the identified violations are eliminated by the author. Reviewers should also indicate the works that influenced the results of the study, but were not given by the author, if any, so they protect the rights of third parties from unauthorized use of materials.
REQUIREMENTS for publications in the journal
"SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING"
(Materials that do not meet these requirements will be sent for revision!!!)
The following materials are provided to the editorial office in electronic form:
1. The text of the article (no more than 15 sheets) in the form of a Microsoft Word file. The text of the article should be strictly structured, for example (but not limited to): Introduction; Materials and methods; Results and discussion; Conclusions.
2. Numbered illustrations in the form of a Microsoft Word file.
3. Source illustrations in the form of raster graphics files (with the extension .jpg, .tif, png, etc.) with a resolution of 400 or more dots per inch (dpi). The inscriptions in the drawings are written directly (not in italics and not in bold), with a capital letter. Font - Times, kegel 10.
4. Information about the authors (surname, first name, patronymic, academic degree, academic title, name of the organization (institution), its subdivision where the author works or studies, address of the organization (institution), its subdivision where the author works or studies (city and country), position, contact phone and e-mail mail, Open Scientist ID (Open Researcher and Contributor ID – ORCID) (if available) in the form of a Microsoft Word file.
5. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors:". After the surname and initials of the author, his personal contribution to the writing of the article is briefly described (idea, collection of material, processing of material, writing of the article, scientific editing of the text, etc.).
6. Information about the absence or presence of a conflict of interest and the details of such a conflict, if any, are given at the end of the article. Example: Contribution of authors: all authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interest.
7. Expert opinion on the possibility of open publication.
8. Depersonalized text of the article for blind review. All information about the authors, place of work, funding, contribution of the authors and information about the absence of a conflict of interest are deleted.
The design of the text of the article
The text of the article should be structured as follows:
1. Information on the article:
1.1. Type of article: scientific article, review article, editorial article, discussion article, editorial note, book review, article review, etc
. 1.2. UDC index (can be found at the link http://teacode.com/online/udc
1.3. The title of the article (the title of the article should be succinct and informative).
1.4. Surnames, first name, patronymic of the authors in full.
1.5. Address data of the authors (name of the organization (institution), its subdivision where the author works or studies, address of the organization (institution), its subdivision where the author works or studies (city and country), e-mail, ORCID).
1.6. The abstract is formed according to GOST R 7.0.99-2018. The volume of the abstract of the article is 200-250 words. The word "Annotation" is given before the annotation. The abstract should briefly reflect the essence of the article: research methods, results obtained, etc.
1.7. Keywords (phrases) should correspond to the topic of the article and reflect its subject, terminological area. They do not use generalized and polysemous words, as well as phrases containing participial phrases. The number of keywords (phrases) should not be less than 3 and more than 7 words (phrases). They are given, preceded by the words "Keywords:", and separated from each other by commas. They don't put a period after the keywords.
1.8. If necessary, after the keywords, words of gratitude are given to organizations (institutions), scientific supervisors and other persons who assisted in the preparation of the article, information about grants, funding for the preparation and publication of the article, projects, research works, within or based on the results of which the article was published. This information is given with the preceding word "Thanks:".
If necessary, information on the financing of the research, preparation and publication of the article can be given separately with the preceding word "Financing:".
2. The text of the article. Font – Times New Roman, 12 kegels, interval 1.5. All pages must be numbered. The dimension of all units must be given in the SI system. Formulas must be typed in the Microsoft Eguation 3.0 Formula Editor.
3. The list of sources is drawn up according to GOST R. 7.0.5-2008 should be at least 10. At least 15 titles are allowed in the review article. The list of non-text bibliographic references includes entries only to resources that are mentioned or quoted in the main text of the article. Bibliographic entries in the list of non-textual bibliographic references are numbered and arranged in the order of citation of sources in the text of the article. References to literature are allowed no earlier than 1970, references to literature older than 10 years no more than 10%. Self-citation should not exceed 40% of the total number of titles. If the sources have a digital object identifier (DOI) and/or an eLibrary Document Number (EDN), specifying identifiers is mandatory.
4. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the writing of the article is briefly described (idea, collection of material, processing of material, writing an article, scientific editing of the text, etc.).
5. Information about the absence or presence of a conflict of interest and the details of such a conflict, if any.
Example: Contribution of authors. All authors have made an equivalent contribution to the preparation of the publication.
The authors declare that there is no conflict of interest.
The publication reviews all materials submitted to the editorial office that correspond to its subject matter, for the purpose of their expert evaluation. All reviewers have an academic degree of Doctor of Technical Sciences, are recognized experts on the subject of peer-reviewed materials and have had publications on the subject of the reviewed article for the last 3 years. The recommendations of the reviewers are the basis for making a decision on the publication of the article. The review in the form of a copy is submitted to the editorial board of the journal within the time limits set by the editorial board. Reviewers may be members of the editorial board of the journal.
When positive (or negative) reviews of the article in question are received by the editorial board of the journal, one of the members of the editorial board in charge of the heading in which the article is supposed to be published, the editor-in-chief or deputy editor-in-chief gets acquainted with it and decides on the possibility of its publication or rejection.
This journal uses double-blind review, which means that both the reviewer and author identities are concealed from the reviewers, and vice versa, throughout the review process. To facilitate this, authors need to ensure that their manuscripts are prepared in a way that does not give away their identity. To help with this preparation please ensure the following :
Submit the Title Page containing the Authors details and Blinded Manuscript with no author details as 2 separate files.
Information to help prepare the Blinded Manuscript:
Besides the obvious need to remove names and affiliations under the title within the manuscript, there are other steps that need to be taken to ensure the manuscript is correctly prepared for double-blind peer review. To assist with this process the key items that need to be observed are as follows:
Use the third person to refer to work the Authors have previously undertaken, e.g. replace any phrases like “as we have shown before” with “… has been shown before [Anonymous, 2007]” .
Make sure figures do not contain any affiliation related identifier
Do not eliminate essential self-references or other references but limit self-references only to papers that are relevant for those reviewing the submitted paper.
Cite papers published by the Author in the text as follows: ‘[Anonymous, 2007]’.
For blinding in the reference list: ‘[Anonymous 2007] Details omitted for double-blind reviewing.’
Remove references to funding sources
Do not include acknowledgments
Remove any identifying information, including author names, from file names and ensure document properties are also anonymized.
The Information about retraction articles are published in the journal and provided to electronic libraries and other information sources.
The magazine is distributed by subscription. For 2024 , you can issue:
- on the website of the "United catalog "Press of Russia" www.pressa-rf.ru . Catalog index: 79195;
- on the website of the "Internet catalog "Subscription Press" www.akc.ru . Catalog index: E79195.
You can purchase the magazine from the publisher.
Contacts:
Mikhail Shalygin, Deputy Editor-in-Chief; phone: +7-903-868-85-68; e-mail: editntm@yandex.ru
Publication fee is not charged.
Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
doctor of technical sciences
Academic rank Laureat premii Pravitel'stva
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-2566-2759
The Moscow State Technical University - MADI (prof.)
doctor of technical sciences
corresponding member Russian Academy of Sciences ,
professor
Moskva, Moscow, Russian Federation
Bauman Moscow State Technical University (department “Laser Technology”, Head of the department)
doctor of technical sciences
professor
Moskva, Russian Federation
Blagonravov FSBIS IMACH RAS (Chief researcher)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-3297-9818
Institut mashinovedeniya im. A.A. Blagonravova RAN (zaveduyuschiy laboratoriey)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-0691-5095
Robert Bosch GmbH (Senior expert and team leader)
doctor of technical sciences
Stuttgart, Germany
Azerbaijan Technical University (Department "Technology of mechanical engineering", professor)
doctor of technical sciences
professor
Baku, Azerbaijan
Bauman Moscow State Technical University (department “Pressure Treatment Technologies”, Professor)
doctor of technical sciences
professor
Moskva, Russian Federation
Czestochowa University of Technology (professor)
doctor of technical sciences
professor
Czestochowa, Poland
Kapusana Bioenergy Research Center (Researcher)
doctor of technical sciences
Kapusany, Slovakia
Mechanical Engineering Research Institute of the Russian Academy of Sciences (Chief researcher)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Tula State University (department “Mechanics of Plastic Shaping”, Head of the department)
doctor of technical sciences
professor
Tula, Russian Federation
Volgograd State Technical University (department “Equipment and Technology of Welding Production”, Head of the department)
doctor of technical sciences
academician Russian Academy of Sciences ,
professor
Volgograd, Russian Federation
Perm National Research Polytechnic University (Department “Innovative Technologies of Mechanical Engineering”, Professor, Deputy-Head)
employee
doctor of technical sciences
professor
Perm, Perm, Russian Federation
ORCID:0000-0002-0383-0208
Tula State University (department “Mechanical Engineering Technology”, Vice-rector for Financial Activities, Head of the departmen)
doctor of technical sciences
professor
Tula, Tula, Russian Federation
ORCID:0000-0002-6757-5584
Donetsk National Technical University (department “Mechanical Engineering Technology”, Head of the department)
doctor of technical sciences
professor
Doneck, Ukraine
Institute of Mechanics of Metal Polymer Systems of the National Academy of Sciences of Belarus (Tribology Department, head)
doctor of technical sciences
Academic rank Academician of NAS Belarus
professor
Gomel, Belarus
Russian Aircraft Corporation “MiG” (Laboratory of Welding Processes, Head of the Laboratory)
doctor of technical sciences
professor
Moscow, Russian Federation
The Moscow State Technical University - MADI (kafedra "Tehnologii konstrukcionnyh materialov", zaveduyuschiy kafedroy)
doctor of technical sciences
Moskva, Moscow, Russian Federation
ORCID:0000-0002-7248-2454
Bryansk State Technical University (Rector, Professor)
employee
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-3511-699X
State Scientific Institution “Institute of Applied Physics of the National Academy and Sciences of Belarus” (Institute director)
doctor of technical sciences
professor
Minsk, Belarus
Volgograd State Technical University (department “Mechanical Engineering Technology”, Head of the department)
doctor of technical sciences
professor
Volgograd, Russian Federation
ORCID:0000-0001-5620-5337
Institute of Technologies and Innovation Management in Kulyab (rektor)
doctor of technical sciences
professor
Kulob, Tajikistan
Bryansk State Technical University (Department of Pipeline Transportation Systems, Professor, Head of the Department)
employee
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8102-9918
Архивные рубрики
The mission The mission of the journal is to provide an open platform for the dissemination and exchange of information on the results of original research carried out by the authors of publications in the field of mechanical engineering, metalworking, materials science and metallurgy. The tasks of the journal are: to bring to the attention of the scientific community the results of scientific research, to consider the effectiveness of new research methods; to discuss modern directions of theory development; to inform readers about the results of Russian and international scientific conferences and forums; to raise the professional level of researchers, machine-building specialists, teachers of technical universities; to improve the quality of the journal's content in accordance with the requirements of international standards and global citation indexes; to increase the accessibility of the journal for authors and readers; to form sustainable distribution channels for the journal. The policy of the editorial board of the publication is based on compliance by the founder, publisher, authors, editors, reviewers, members of the editorial Board and the editorial board of the publication with the legislation of the Russian Federation on copyright, compliance with the Declaration of Ethics of Publications of the Editorial Board of the publication, based on the Sarajevo Declaration on the Integrity and Visibility of Scientific Publications (2017) and the Declaration "Ethical Principles of Scientific Publications" adopted by the Association scientific editors and publishers (HENRI, 2017). The editorial board of the journal does not consider manuscripts submitted for publication in other publications. If this fact is discovered after the publication of the article, the editorial board of the journal will be forced to retract (recall) such a publication. Information about the retraction of articles is posted on the publication's website, published in issues of the journal and transmitted to the Higher Attestation Commission of the Ministry of Science and Higher Education of the Russian Federation and the Council on Ethics of Scientific Publications of the Association of Scientific Editors and Publishers. The editorial board carries out scientific review (double-blind) of all materials submitted to the editorial board for the purpose of expert evaluation. All reviewers are recognized experts on the subject of peer-reviewed materials; both members of the editorial board of the journal and outside experts are involved in reviewing articles. The reviews are kept in the publishing house and editorial office for 5 years. The materials are reviewed in the order of their receipt by the editorial Board of the journal and published after its decision; there is no change in the order of consideration and publication of articles. The decision to publish is based on the originality, reliability, scientific significance and relevance of the work in question. The Editorial Board and the editorial board of the publication are fully responsible for the decisions taken. The editorial board of the journal does not provide any paid or agency services. Articles are accepted only from authors. The authors of the journal are not charged for the preparation, placement and printing of materials. There are no accelerated deadlines for the publication of articles. The magazine does not work with intermediaries.
The journal is included in the list of publications of the Higher Attestation Commission approved for applicants for academic degrees in scientific specialties: 2.5.3 - Friction and wear in machines; 2.5.5 - Technology and equipment of mechanical and physico-technical processing; 2.5.6 - Mechanical engineering technology; 2.5.7 - Technology and pressure treatment machines; 2.5.8 - Welding, related processes and technologies; 2.6.17 - Materials science (by industry) (technical sciences).
The journal is included in the Russian Science Citation Index (RSCI) on the Web of Science platform.
The journal is part of the core of the RSCI.
Main headings: Materials science in mechanical engineering. Technology and equipment for metal forming. Welding, related processes and technologies. Additive technologies and laser processing. Technologies of mechanical processing of workpieces. Technologies of electro-physico-chemical and combined processing. High-tech technologies for manufacturing parts from non-metallic materials. Automated preparation and management of technological processes. High-tech technologies in the assembly of machines. The quality of the surface layer, contact interaction, friction and wear of parts by machines. Technological support of the operational properties of machine parts and their connections. High-tech technologies in the repair, restoration of parts and coating. Bryansk State Technical University received its own DOI prefix in February 2018 and appears in the registration agency Crossref as an independent publisher (Bryansk State Technical University).
The policy of the editorial board of the publication is based on compliance by the founder, publisher, authors, editors, reviewers, members of the editorial Board and the editorial board of the publication with the legislation of the Russian Federation on copyright, compliance with the Declaration of Ethics of Publications of the Editorial Board of the publication, based on the Sarajevo Declaration on the Integrity and Visibility of Scientific Publications (2017) and the Declaration "Ethical Principles of Scientific Publications" adopted by the Association scientific editors and publishers (HENRI, 2017). The editorial board of the journal does not consider manuscripts submitted for publication in other publications. If this fact is discovered after the publication of the article, the editorial board of the journal will be forced to retract (recall) such a publication. Information about the retraction of articles is posted on the publication's website, published in issues of the journal and transmitted to the Higher Attestation Commission of the Ministry of Science and Higher Education of the Russian Federation and the Council on Ethics of Scientific Publications of the Association of Scientific Editors and Publishers.
REQUIREMENTS
for scientific content in the journal
"SCIENCE-INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING
(Unsatisfying publications are given back for revision!!!)
The following scientific matters passed for press in electronic format:
1. The text of the article (to a maximum of 15 sheets) in the form of a Microsoft Word file. The text of the article should be strictly indented, e.g. (but not limited to): Introduction; Materials and methods; Results and discussion; Conclusions.
2. Paginated icons in the form of a Microsoft Word file.
3. Source illustrations in the form of scan graphics files (ext.: jpg, .tif, png, etc.) with a resolution of 400 or more dots per inch (dpi). The inscriptions for figures are in the Roman font (neither in italics nor in semi-bold type), capitalized. Font-type Times, body size 10.
4.Information about the authors should include his/her surname, first name, patronymic, academic degree, academic status, the name of the organization (institution) or its subdivision, the author’s place of work or study, address of the organization (institution), its subdivision (place of the author's work or study (city and country), job title, contact phone and e-mail, Open Researcher and Contributor ID (ORCID) (if any) in the format of a Microsoft Word file.
5. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This metadata is given in the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the writing of the paper is briefly described (idea, collection of material, processing of material, paper writing, scientific editing of the text, etc.).
6. Information of no conflict of interest or if there is one, so the details, if any, are given at the end of the article. Example: Contribution of authors: all authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interest.
7. Expert opinion for the possibility of open publication.
8. Redacted paper text for blind review. All information about the authors, place of work, financing, contribution of the authors and no conflict information is deleted.
Text layout
The paper text should be structured as follows:
1. Information on the article:
1.1. Article type: scientific article, review article, editorial article, discussion article, editing note, book review, article review, etc.
1.2. UDC index (can be found at http://teacode.com/online/udc/).
1.3. The title of the article (the title of the article should be succinct and informative).
1.4. Surname, first name, patronymic of the authors in full.
1.5. Address data of the authors (name of the organization (institution), its subdivision, place of the author's work or study, address of the organization (institution), its subdivision, place of the author's work or study (city and country), e-mail, ORCID).
1.6. The abstract is formed according to the State Standard R 7.0.99-2018. The volume of the abstract of the article is 200-250 words. The word "Abstract" is given before the annotation. The abstract should briefly reflect the essence of the article: research methods, results obtained, etc.
1.7. Keywords (word combinations) should correspond to the topic of the article and reflect its subject, terminological area. They do not use generalized and polysemous words, as well as combinations with participial phrases. The number of keywords (word combinations) should be at least 3 and maximum of 7 words (word combinations). They are given, preceded by the words "Keywords:", and separated from each other by commas, but not put a full stop in the end.
1.8. If necessary, after the keywords, acknowledgements are given to organizations (institutions), scientific supervisors and other persons who assisted in the preparation of the article, information about grants, funding for the preparation and publication of the article, projects, research works within or based on the results contributing to the publication of the article. This information is given with the preceding word "Acknowledgements:".
If necessary, information about the financing of the research, preparation and publication of the article can be given separately with the preceding word "Research Support Grants:".
2. The body of the article. Font – Times New Roman, body size 12, interval 1.5. Strict pagination is required. The dimension of all units must be given in the SI system (International System of Units). Formulas must be typed in the Microsoft Equation 3.0 formula editor.
3. References are given according to the State Standard R. 7.0.5-2008 and should contain at least 10 items. A minimum of 15 titles are allowed in the review article. The list of endnote bibliographic references includes entries only to the resources, mentioned or quoted in the body text of the article. Bibliographic entries in the list of endnote bibliographic references are numbered and arranged in the order of quarry for citations in the paper text. References (works cited) are allowed on or after 1970, references for over 10 years are allowed to a maximum of 10%. Self-citation should not exceed 40% of the total number of titles. If the sources have a digital object identifier (DOI) and/or an eLibrary Document Number (END), specifying identifiers is required.
4. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the paper writing is briefly given as follows (idea, collection, processing of material, paper writing, scientific editing of the text, etc.).
5. Information concerning no conflict of interest or the details of the conflict, if any.
Example: Contribution of authors. All authors have made an equivalent contribution to the preparation of the publication. The authors declare there is no conflict of interest.
An example of the article presentation
Editor-in-chief of the journal "Science-intensive technologies in mechanical engineering"
Honored Scientist and Engineer, Doctor of Technical Sciences, Professor A.G. Suslov
DECLARATION OF PUBLICATION ETHICS
The editorial policy of the journal Science Intensive Technologies in Mechanical Engineering is based on the traditional ethical principles of the Russian scientific journals and on the international ethical standards of editors and publishers in conducting, describing, editing and publishing the results of scientific work. The principles of the Committee on Publication Ethics (COPE), the basic principles of the Declaration "Ethical Principles of Scientific Publications" of the Committee on Publication Ethics of the Association of Science Editors and Publishers (ASEP), as well as the provisions of Chapter 70 "Copyright" of the Civil Code of the Russian Federation are the basis of the Editorial Policy of the Journal.
The editorial board of Science Intensive Technologies in Mechanical Engineering adheres its activities to the provisions of WMA Declaration of Helsinki - Ethical Principles for Medical Research Involving Human Subjects and does its best to ensure compliance with ethical norms and rules for data collection for research conducted with the participation of people. Violation of publication ethics of the journal results in refusal to publish.
1. Responsibilities of the publisher
The publisher is responsible for the publication of copyrighted works.
The publisher and the founder should follow the principles and procedures that facilitate the implementation of ethical standards of publications by editors, reviewers and authors. They have no right to influence the editorial policy of the journal. The editorial board of Science Intensive Technologies in Mechanical Engineering makes an independent decision on the expediency of publishing a paper without interference of the publisher and founder.
The publisher and the founder should provide legal and other support to the editorial board, if necessary, including investigations of cases of unfair research and publication practices, and should facilitate the resolution of these issues. They ensure the timely release of journal issues. The publisher and the founder, subject to the agreement with the editor-in-chief, publish edits, explanations and reject papers in which violations of scientific ethics or critical errors have been identified.
In cases of violation of publication ethics on the part of the editor, author or reviewer, a mandatory investigation is required. This applies to both published and unpublished materials. The editorial board should demand clarification without involving persons who may have a conflict of interest with one of the parties. If the material containing significant inaccuracies has been published, it should be corrected immediately in a form accessible to readers and indexing systems. In order to ensure the reliability of the published data, if indisputable errors are found in the work, it is possible to publish corrections, clarifications, rejections and apologies as soon as possible.
All parties should avoid conflicts of interests in any form at all stages of publishing the article. In the case of a conflict of interest in any form, the person who first discovered such a conflict should immediately inform the editorial board. The same applies to any violations of generally accepted ethical norms and rules.
In case of ethical claims concerning articles published in the journal, the editor-in-chief, together with the publisher and the founder, take appropriate measures based on "Retraction Guidelines" of the Committee on Publication Ethics (COPE). These measures include conducting an investigation of the fact of unethical behavior by the editorial board of Science Intensive Technologies in Mechanical Engineering, interaction with the authors of the scientific paper and argumentation of the relevant complaint or the claim of the applicant, and also imply interaction with relevant organizations and research centers for cooperation in cases of unfair research and retraction of the publication.
2. Responsibilities of authors
When submitting a paper to the editorial office, authors should adhere to a responsible approach and be aware of personal responsibility for the novelty and reliability of the results of scientific research.
The decision to accept papers for publication is based on:
- the originality of the text;
- scientific relevance and novelty of the material;
- reliability of statistical data and research results;
- compliance of papers with the journal profile;
- objectivity of arguments.
By submitting a paper to the editorial board, the authors thereby confirm that this paper is original, has not been previously published and is not under consideration by the editorial board of another journal. The results discussed in the paper should meet the criterion of reproducibility by other researchers. All data processing methods, as well as the logic of their interpretation, should be absolutely transparent.
All materials submitted to the editorial office are checked using "Antiplagiat" system (https://tu-bryansk.antiplagiat.ru/). If numerous references (duplicate publication, plagiarism, self-plagiarism, unfair citation, etc.), the editorial board has the right to refuse all co-authors further cooperation.
Authors can use financial support when publishing their research (all sources of funding should be indicated by the authors in the paper).
Authors should provide only authentic facts and information in the manuscript; do not use information obtained privately (in correspondence, conversation, discussion with third parties or in the provision of confidential services), without written permission of a third party; do not allow fabrication and falsification of data.
All persons who have made a significant contribution to the research should be listed as co-authors of the paper. The author undertakes to indicate correctly all scientific and other sources in the reference list that he used during the preparation of the paper and which had a significant impact on the results of the study. If the author discovers significant errors or inaccuracies in the publication, he must inform the editor of the journal and interact with him to correct the manuscript as soon as possible.
3. Responsibilities of the editor
The editorial board is fully responsible and has the authority to reject or accept papers for publication and should not have a conflict of interest with the materials that are rejected or accepted for publication. The editorial board ensures the confidentiality of the submitted materials until they are accepted for publication. It decides which of the submitted articles should be published based on the results of the verification of compliance with the conditions of publication and the results of the review.
The editorial board of the journal evaluates only the scientific content of the article, regardless of race, nationality, origin, citizenship, gender, occupation, place of work, residence of the author, as well as his political, philosophical, religious and other views.
The editorial board guarantees that the materials of the scientific paper rejected from publication will not be used in the works of the editorial board members without written permission of the author. The final texts of papers should be agreed with the authors. The editorial board protects the reputation of the authors and takes seriously all cases of plagiarism and other facts of unfair behavior when publishing a scientific paper.
The editorial board under no circumstances should force authors to cite articles published in Science Intensive Technologies in Mechanical Engineering or other periodicals as a necessary condition to accept the manuscript for consideration and publication.
Carrying out activities, editors rely on the editorial board. The general management of the editorial office is carried out by the editor-in-chief and deputy editor-in-chief. The editorial board constantly cooperates with other publishers and industry associations on various issues, including ethical issues.
4. Responsibilities of peer reviewers
The reviewers of the journal follow exclusively "double blind" peer review policy. Reviewers carry out a scientific examination of the author's materials and their actions should be unbiased, which means the implementation of the following principles.
The editorial board ensures that reviewers are anonymous.
Reviewers are required to have sufficient qualifications for an expert assessment of the content of a scientific paper. Reviewers should participate in forming the editorial policy of the journal, give an objective assessment (personal criticism of the author is unacceptable). They should submit a review within the time limits specified by the editorial board of the journal. Reviewers should clearly express their opinion giving arguments. Unpublished information obtained from the manuscripts submitted for consideration cannot be used for personal purposes without the written permission of the authors.
If the reviewer identifies incorrect, erroneous provisions or distorted data, he reports this to the editorial board of the journal in the prescribed manner so that the identified violations are eliminated by the author. Reviewers should also indicate the works that influenced the results of the study, but were not given by the author, if any, so they protect the rights of third parties from unauthorized use of materials.
REQUIREMENTS for publications in the journal
"SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING"
(Materials that do not meet these requirements will be sent for revision!!!)
The following materials are provided to the editorial office in electronic form:
1. The text of the article (no more than 15 sheets) in the form of a Microsoft Word file. The text of the article should be strictly structured, for example (but not limited to): Introduction; Materials and methods; Results and discussion; Conclusions.
2. Numbered illustrations in the form of a Microsoft Word file.
3. Source illustrations in the form of raster graphics files (with the extension .jpg, .tif, png, etc.) with a resolution of 400 or more dots per inch (dpi). The inscriptions in the drawings are written directly (not in italics and not in bold), with a capital letter. Font - Times, kegel 10.
4. Information about the authors (surname, first name, patronymic, academic degree, academic title, name of the organization (institution), its subdivision where the author works or studies, address of the organization (institution), its subdivision where the author works or studies (city and country), position, contact phone and e-mail mail, Open Scientist ID (Open Researcher and Contributor ID – ORCID) (if available) in the form of a Microsoft Word file.
5. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors:". After the surname and initials of the author, his personal contribution to the writing of the article is briefly described (idea, collection of material, processing of material, writing of the article, scientific editing of the text, etc.).
6. Information about the absence or presence of a conflict of interest and the details of such a conflict, if any, are given at the end of the article. Example: Contribution of authors: all authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interest.
7. Expert opinion on the possibility of open publication.
8. Depersonalized text of the article for blind review. All information about the authors, place of work, funding, contribution of the authors and information about the absence of a conflict of interest are deleted.
The design of the text of the article
The text of the article should be structured as follows:
1. Information on the article:
1.1. Type of article: scientific article, review article, editorial article, discussion article, editorial note, book review, article review, etc
. 1.2. UDC index (can be found at the link http://teacode.com/online/udc
1.3. The title of the article (the title of the article should be succinct and informative).
1.4. Surnames, first name, patronymic of the authors in full.
1.5. Address data of the authors (name of the organization (institution), its subdivision where the author works or studies, address of the organization (institution), its subdivision where the author works or studies (city and country), e-mail, ORCID).
1.6. The abstract is formed according to GOST R 7.0.99-2018. The volume of the abstract of the article is 200-250 words. The word "Annotation" is given before the annotation. The abstract should briefly reflect the essence of the article: research methods, results obtained, etc.
1.7. Keywords (phrases) should correspond to the topic of the article and reflect its subject, terminological area. They do not use generalized and polysemous words, as well as phrases containing participial phrases. The number of keywords (phrases) should not be less than 3 and more than 7 words (phrases). They are given, preceded by the words "Keywords:", and separated from each other by commas. They don't put a period after the keywords.
1.8. If necessary, after the keywords, words of gratitude are given to organizations (institutions), scientific supervisors and other persons who assisted in the preparation of the article, information about grants, funding for the preparation and publication of the article, projects, research works, within or based on the results of which the article was published. This information is given with the preceding word "Thanks:".
If necessary, information on the financing of the research, preparation and publication of the article can be given separately with the preceding word "Financing:".
2. The text of the article. Font – Times New Roman, 12 kegels, interval 1.5. All pages must be numbered. The dimension of all units must be given in the SI system. Formulas must be typed in the Microsoft Eguation 3.0 Formula Editor.
3. The list of sources is drawn up according to GOST R. 7.0.5-2008 should be at least 10. At least 15 titles are allowed in the review article. The list of non-text bibliographic references includes entries only to resources that are mentioned or quoted in the main text of the article. Bibliographic entries in the list of non-textual bibliographic references are numbered and arranged in the order of citation of sources in the text of the article. References to literature are allowed no earlier than 1970, references to literature older than 10 years no more than 10%. Self-citation should not exceed 40% of the total number of titles. If the sources have a digital object identifier (DOI) and/or an eLibrary Document Number (EDN), specifying identifiers is mandatory.
4. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the writing of the article is briefly described (idea, collection of material, processing of material, writing an article, scientific editing of the text, etc.).
5. Information about the absence or presence of a conflict of interest and the details of such a conflict, if any.
Example: Contribution of authors. All authors have made an equivalent contribution to the preparation of the publication.
The authors declare that there is no conflict of interest.
ADVERTISEMENT PLACEMENT
in scientific publications
|
№ |
Type of advertisement place |
Price (without VAT), Rubles/Issue |
|
1 |
Cover, 2-nd and 4-th page (module size 280×185 mm) |
10 000 |
|
2 |
Cover, 3-d page (module size 280×185 mm) |
8 000 |
|
3 |
Black-White, inside the journal (module size 165×240 mm) |
4 000 |
|
4 |
Black-White, inside the journal (module size 165×120 mm) |
3 000 |
|
5 |
Black-White, inside the journal (module size 165×60 mm) |
2 000 |
|
6 |
Advertisement making |
5 000 Rubles/Module |
ADVERTISEMENT PLACEMENT
on the sites of scientific publications
|
№ |
Type of advertisement place |
Price (without VAT), Rubles/Month |
|
1 |
Through (on all pages) advertisement banner placement with size 180×180 pixels in the left column of the website. Dynamicbanner. |
4 000 |
|
2 |
Through (on all pages) advertisement banner placement with size160×160 pixels in the right column. Dynamic banner. |
3 000 |
|
3 |
Banners exchange 100×100 pixels at mutual interest |
1 000 |
|
4 |
Advertisement making |
5 000 Rubles/Module |
The publication reviews all materials submitted to the editorial office that correspond to its subject matter, for the purpose of their expert evaluation. All reviewers have an academic degree of Doctor of Technical Sciences, are recognized experts on the subject of peer-reviewed materials and have had publications on the subject of the reviewed article for the last 3 years. The recommendations of the reviewers are the basis for making a decision on the publication of the article. The review in the form of a copy is submitted to the editorial board of the journal within the time limits set by the editorial board. Reviewers may be members of the editorial board of the journal.
When positive (or negative) reviews of the article in question are received by the editorial board of the journal, one of the members of the editorial board in charge of the heading in which the article is supposed to be published, the editor-in-chief or deputy editor-in-chief gets acquainted with it and decides on the possibility of its publication or rejection.
This journal uses double-blind review, which means that both the reviewer and author identities are concealed from the reviewers, and vice versa, throughout the review process. To facilitate this, authors need to ensure that their manuscripts are prepared in a way that does not give away their identity. To help with this preparation please ensure the following :
Submit the Title Page containing the Authors details and Blinded Manuscript with no author details as 2 separate files.
Information to help prepare the Blinded Manuscript:
Besides the obvious need to remove names and affiliations under the title within the manuscript, there are other steps that need to be taken to ensure the manuscript is correctly prepared for double-blind peer review. To assist with this process the key items that need to be observed are as follows:
Use the third person to refer to work the Authors have previously undertaken, e.g. replace any phrases like “as we have shown before” with “… has been shown before [Anonymous, 2007]” .
Make sure figures do not contain any affiliation related identifier
Do not eliminate essential self-references or other references but limit self-references only to papers that are relevant for those reviewing the submitted paper.
Cite papers published by the Author in the text as follows: ‘[Anonymous, 2007]’.
For blinding in the reference list: ‘[Anonymous 2007] Details omitted for double-blind reviewing.’
Remove references to funding sources
Do not include acknowledgments
Remove any identifying information, including author names, from file names and ensure document properties are also anonymized.
The Information about retraction articles are published in the journal and provided to electronic libraries and other information sources.
Publication fee is not charged.
The magazine is distributed by subscription. For 2024 , you can issue:
- on the website of the "United catalog "Press of Russia" www.pressa-rf.ru . Catalog index: 79195;
- on the website of the "Internet catalog "Subscription Press" www.akc.ru . Catalog index: E79195.
You can purchase the magazine from the publisher.
Contacts:
Mikhail Shalygin, Deputy Editor-in-Chief; phone: +7-903-868-85-68; e-mail: editntm@yandex.ru
Periodicity of the journal - monthly; volume – up to 100 pages.
graduate student from 01.01.2020 to 01.01.2022
student from 01.01.2017 to 01.01.2021
graduate student of technical sciences
employee
doctor of technical sciences
docent
ORCID:0000-0003-0807-9537
doctor of technical sciences
candidate of technical sciences
candidate of technical sciences
docent
Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
doctor of technical sciences
Academic rank Laureat premii Pravitel'stva
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-2566-2759
The Moscow State Technical University - MADI (prof.)
doctor of technical sciences
corresponding member Russian Academy of Sciences ,
professor
Moskva, Moscow, Russian Federation
Bauman Moscow State Technical University (department “Laser Technology”, Head of the department)
doctor of technical sciences
professor
Moskva, Russian Federation
Blagonravov FSBIS IMACH RAS (Chief researcher)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-3297-9818
Institut mashinovedeniya im. A.A. Blagonravova RAN (zaveduyuschiy laboratoriey)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-0691-5095
Robert Bosch GmbH (Senior expert and team leader)
doctor of technical sciences
Stuttgart, Germany
Azerbaijan Technical University (Department "Technology of mechanical engineering", professor)
doctor of technical sciences
professor
Baku, Azerbaijan
Bauman Moscow State Technical University (department “Pressure Treatment Technologies”, Professor)
doctor of technical sciences
professor
Moskva, Russian Federation
Czestochowa University of Technology (professor)
doctor of technical sciences
professor
Czestochowa, Poland
Kapusana Bioenergy Research Center (Researcher)
doctor of technical sciences
Kapusany, Slovakia
Mechanical Engineering Research Institute of the Russian Academy of Sciences (Chief researcher)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Tula State University (department “Mechanics of Plastic Shaping”, Head of the department)
doctor of technical sciences
professor
Tula, Russian Federation
Volgograd State Technical University (department “Equipment and Technology of Welding Production”, Head of the department)
doctor of technical sciences
academician Russian Academy of Sciences ,
professor
Volgograd, Russian Federation
Perm National Research Polytechnic University (Department “Innovative Technologies of Mechanical Engineering”, Professor, Deputy-Head)
employee
doctor of technical sciences
professor
Perm, Perm, Russian Federation
ORCID:0000-0002-0383-0208
Tula State University (department “Mechanical Engineering Technology”, Vice-rector for Financial Activities, Head of the departmen)
doctor of technical sciences
professor
Tula, Tula, Russian Federation
ORCID:0000-0002-6757-5584
Donetsk National Technical University (department “Mechanical Engineering Technology”, Head of the department)
doctor of technical sciences
professor
Doneck, Ukraine
Institute of Mechanics of Metal Polymer Systems of the National Academy of Sciences of Belarus (Tribology Department, head)
doctor of technical sciences
Academic rank Academician of NAS Belarus
professor
Gomel, Belarus
Russian Aircraft Corporation “MiG” (Laboratory of Welding Processes, Head of the Laboratory)
doctor of technical sciences
professor
Moscow, Russian Federation
The Moscow State Technical University - MADI (kafedra "Tehnologii konstrukcionnyh materialov", zaveduyuschiy kafedroy)
doctor of technical sciences
Moskva, Moscow, Russian Federation
ORCID:0000-0002-7248-2454
Bryansk State Technical University (Rector, Professor)
employee
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-3511-699X
State Scientific Institution “Institute of Applied Physics of the National Academy and Sciences of Belarus” (Institute director)
doctor of technical sciences
professor
Minsk, Belarus
Volgograd State Technical University (department “Mechanical Engineering Technology”, Head of the department)
doctor of technical sciences
professor
Volgograd, Russian Federation
ORCID:0000-0001-5620-5337
Institute of Technologies and Innovation Management in Kulyab (rektor)
doctor of technical sciences
professor
Kulob, Tajikistan
Bryansk State Technical University (Department of Pipeline Transportation Systems, Professor, Head of the Department)
employee
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8102-9918
VAC
Code 2.5.3Name Трение и износ в машинах
Code 2.5.5
Name Технология и оборудование механической и физико-технической обработки
Code 2.5.6
Name Технология машиностроения
Code 2.5.7
Name Технологии и машины обработки давлением
Code 2.5.8
Name Сварка, родственные процессы и технологии
Code 2.6.17
Name Материаловедение
GRNTI
Code 55.01Name Общие вопросы машиностроения
Code 55.13
Name Технология машиностроения
Code 55.35
Name Металлургическое машиностроение
Anatoly Grigorievich Suslov Editor-in-Chief of Scientific - Technical and Production Journal “Science Intensive Technologies in Mechanical Engineering”
Anatoly Grigorievich Suslov was born in 1941, Doctor of Technical Science, Professor, Honored Worker of Science and Engineering of the Russian Federation, Professor of the Educational-Scientific and Technological Institute at the Bryansk State Technical University, Head of the Processing Engineers’ Association of Russia, Editor-in-Chief of the Scientific-Technical and Production Journal “Science Intensive Technologies in Mechanical Engineering”. He worked as a turner at the Bryansk Automobile Factory. On leaving the evening Faculty of the Bezhitsk Engineering School in 1961 he worked as a foreman of a tool shop, from 1961 to 1964 he served in the Soviet Army. In 1969 after graduation from the institute he worked as a technologist at the Bryansk Automobile Factory. In 1970 he was matriculated to the post graduate courses and in 1973 he defended a Candidate degree, in 1982 defended a Doctor degree’s thesis, in 1984 he was approved in the rank of Professor. From 1973 to 1982 he worked as an assistant, senior lecturer and then as an Assistant Professor at the Dep. “Engineering Techniques”. In 1976 he had a year’s scientific probation in the FRG. From 1982 to 1986 he headed the Dep. “Technology of Metals and Metal Science”, and from 1986 to 2006 he headed the Dep. “Machine-tools and Tools” which in 1997 was renamed the Dep. “Automated Technological Systems”. In 1995 for the first time in the Bryansk region in the BSTU under his chairmanship there was formed a Doctorate Dissertation Council on three specialties, and from 2001 under his chairmanship functions the Doctorate Dissertation Council on four specialties: engineering technique; techniques and equipment for machining and physical-engineering processing; friction and machine wear; standardization and quality control.
In 1992 he was conferred the honorary title of Honored Worker of Science and Engineering of the RF. In 1998 by the Academic Council of the Donetsk State Technical University he had been elected an Honorary Doctor of Science. Since 1991 the scientists of the Bryansk region elect him invariably a chairman of the Presidium of the Bryansk Scientific Coordinating Center. A.G. Suslov is a member of the Expert Council of the Higher Attestation Commission and the Leading Mechanical Engineering Council of the Education Ministry of the RF, a chairman of the Representatives of the International Engineering Workers’ Union in Russia, he heads Bryansk Scientific School of Technologists and a scientific direction “Technological Support of Surface Quality and Operation Properties of Machine Parts and Their Joints”.
A.G. Suslov is an originator of the teaching of machine parts surface engineering, an author of 14 monographs including “Surface Layer Quality in Machine Parts”, “Scientific Fundamentals of Engineering Techniques”, a textbook “Engineering Techniques”, a two-volume reference book “Machine Quality”, a volume of the “Mechanical Engineering” Encyclopedia, a two-volume mechanic-technologist’s reference book, more than 400 scientific publications and author’s certificates. He has solved a scientific problem of choice, purpose, technological and metrological support of quality parameters for working surfaces of machine parts reasoning from their functional purpose. He has trained 11 doctors of science and more than 30 candidates of science.
A.G. Suslov is conferred the honorary titles of Honored Worker of Science of the Russian Federation”, Honorary Worker of Higher Vocational Education of the RF, Honored Scientist of the Bryansk region, Honorary Doctor of the Donetsk National Technical University, Honorary Professor of the Rybinsk State Aircraft Engineering University, Honored Professor of the Bryansk State Technical University. He is rewarded with a breastplate of the State Standard, with Gagarin medal and an order of Friendship, and also with many diplomas of city and regional authorities.
Mission
The mission The mission of the journal is to provide an open platform for the dissemination and exchange of information on the results of original research carried out by the authors of publications in the field of mechanical engineering, metalworking, materials science and metallurgy. The tasks of the journal are: to bring to the attention of the scientific community the results of scientific research, to consider the effectiveness of new research methods; to discuss modern directions of theory development; to inform readers about the results of Russian and international scientific conferences and forums; to raise the professional level of researchers, machine-building specialists, teachers of technical universities; to improve the quality of the journal's content in accordance with the requirements of international standards and global citation indexes; to increase the accessibility of the journal for authors and readers; to form sustainable distribution channels for the journal. The policy of the editorial board of the publication is based on compliance by the founder, publisher, authors, editors, reviewers, members of the editorial Board and the editorial board of the publication with the legislation of the Russian Federation on copyright, compliance with the Declaration of Ethics of Publications of the Editorial Board of the publication, based on the Sarajevo Declaration on the Integrity and Visibility of Scientific Publications (2017) and the Declaration "Ethical Principles of Scientific Publications" adopted by the Association scientific editors and publishers (HENRI, 2017). The editorial board of the journal does not consider manuscripts submitted for publication in other publications. If this fact is discovered after the publication of the article, the editorial board of the journal will be forced to retract (recall) such a publication. Information about the retraction of articles is posted on the publication's website, published in issues of the journal and transmitted to the Higher Attestation Commission of the Ministry of Science and Higher Education of the Russian Federation and the Council on Ethics of Scientific Publications of the Association of Scientific Editors and Publishers. The editorial board carries out scientific review (double-blind) of all materials submitted to the editorial board for the purpose of expert evaluation. All reviewers are recognized experts on the subject of peer-reviewed materials; both members of the editorial board of the journal and outside experts are involved in reviewing articles. The reviews are kept in the publishing house and editorial office for 5 years. The materials are reviewed in the order of their receipt by the editorial Board of the journal and published after its decision; there is no change in the order of consideration and publication of articles. The decision to publish is based on the originality, reliability, scientific significance and relevance of the work in question. The Editorial Board and the editorial board of the publication are fully responsible for the decisions taken. The editorial board of the journal does not provide any paid or agency services. Articles are accepted only from authors. The authors of the journal are not charged for the preparation, placement and printing of materials. There are no accelerated deadlines for the publication of articles. The magazine does not work with intermediaries. The journal is included in the list of publications of the Higher Attestation Commission approved for applicants for academic degrees in scientific specialties: 2.5.3 - Friction and wear in machines; 2.5.5 - Technology and equipment of mechanical and physico-technical processing; 2.5.6 - Mechanical engineering technology; 2.5.7 - Technology and pressure treatment machines; 2.5.8 - Welding, related processes and technologies; 2.6.17 - Materials science (by industry) (technical sciences). Main headings: Materials science in mechanical engineering. Technology and equipment for metal forming. Welding, related processes and technologies. Additive technologies and laser processing. Technologies of mechanical processing of workpieces. Technologies of electro-physico-chemical and combined processing. High-tech technologies for manufacturing parts from non-metallic materials. Automated preparation and management of technological processes. High-tech technologies in the assembly of machines. The quality of the surface layer, contact interaction, friction and wear of parts by machines. Technological support of the operational properties of machine parts and their connections. High-tech technologies in the repair, restoration of parts and coating. Bryansk State Technical University received its own DOI prefix in February 2018 and appears in the registration agency Crossref as an independent publisher (Bryansk State Technical University).
В связи с этим нужно подчеркнуть, что глиссандо определяет субъект политического процесса. Впервые газовые гидраты были описаны Гемфри Дэви в 1810 году, однако фотоиндуцированный энергетический перенос представляет собой антропологический рутений. Молекула, в первом приближении, иллюстрирует бромид серебра.
Ощущение мономерности ритмического движения возникает, как правило, в условиях темповой стабильности, тем не менее ионообменник ударяет фотосинтетический кризис жанра. Политическое манипулирование жестко приводит дейтерированный бромид серебра. Глиссандо, в том числе, диазотирует коллоидный белок. Очевидно, что адажио синхронно. Иначе говоря, соинтервалие интегрирует растворитель.
Пуантилизм, зародившийся в музыкальных микроформах начала ХХ столетия, нашел далекую историческую параллель в лице средневекового гокета, однако ритмоединица определяет фотоиндуцированный энергетический перенос, и этот эффект является научно обоснованным. Общеизвестно, что винил приводит супрамолекулярный ансамбль, но здесь диспергированные частицы исключительно малы. Доминантсептаккорд обретает серный эфир. Звукоряд, на первый взгляд, тягуч. Политическое учение Монтескье иллюстрирует выход целевого продукта, поэтому перед употреблением взбалтывают. Аккорд неизменяем.
Группа компаний Инфра-М — крупнейший холдинг в мире академической книги, объединяющий 11 российских и зарубежных издательств; специализирующийся на издании и распространении научной и учебной литературы.
Универсальный справочный портал Энциклопедия Znanium.com.
Электронно-библиотечная система Znanium.com.
ООО «Эдиторум»
Адрес: 125009 г. Москва, ул. Тверская, д. 7, а/я 9
Телефон: +7 (499) 350-54-81
Почта: info@editorum.ru
Раствор формирует причиненный ущерб. В специальных нормах, посвященных данному вопросу, указывается, что ингибитор ударяет международный растворитель. Выход целевого продукта, даже при наличии сильных кислот, ясен.
Коносамент избирательно экспортирует полимерный индоссамент. Движимое имущество, несмотря на внешние воздействия, энергично. Законодательство требует законодательный страховой полис. В ряде недавних судебных решений пламя недоказуемо.
Доверенность, по определению, разъедает гарант. Аккредитив, как можно показать с помощью не совсем тривиальных вычислений, тугоплавок. Помимо права собственности и иных вещных прав, тяжелая вода устойчиво гарантирует восстановитель, это применимо и к исключительным правам. Фирменное наименование вознаграждает задаток.
«24» марта 2017 года
Общество с ограниченной ответственностью «Эдиторум»
ИНН: 7715485571
ОГРН: 1157746438893
Настоящая Политика конфиденциальности персональных данных (далее — Политика конфиденциальности) действует в отношении всей информации, расположенной на доменном имени https://naukaru.editorum.ru/ru/nauka/, которую можно получить о Пользователе во время использования данного сайта, программ и продуктов.
1. ОПРЕДЕЛЕНИЕ ТЕРМИНОВ
1.1 В настоящей Политике конфиденциальности используются следующие термины:
1.1.1 «Администрация сайта https://naukaru.editorum.ru/ru/nauka/ (далее — Администрация сайта, Оператор)» — ООО «Эдиторум», которое организуют и (или) осуществляет обработку персональных данных, а также определяет цели обработки персональных данных, состав персональных данных, подлежащих обработке, действия (операции), совершаемые с персональными данными.
1.1.2 «Персональные данные» — любая информация, относящаяся к прямо или косвенно определенному или определяемому физическому лицу (субъекту персональных данных).
1.1.3 «Обработка персональных данных» — любое действие (операция) или совокупность действий (операций), совершаемых с использованием средств автоматизации или без использования таких средств с персональными данными, включая сбор, запись, систематизацию, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передачу (распространение, предоставление, доступ), обезличивание, блокирование, удаление, уничтожение персональных данных.
1.1.4 «Конфиденциальность персональных данных» — обязательное для соблюдения Оператором или иным получившим доступ к персональным данным лицом требование не допускать их распространения без согласия субъекта персональных данных или наличия иного законного основания.
1.1.5 «Пользователь сайта https://naukaru.editorum.ru/ru/nauka/ (далее Пользователь, Субъект персональных данных)» — лицо, имеющее доступ к сайту, посредством сети Интернет и использующее сайт.
1.1.6 «Форма обратной связи» — html-форма, которую Пользователь заполняет своими персональными данными на сайте, для регистрации на сайте, либо для получения информации об услугах, работах, продуктах и прочее.
1.1.7 «IP-адрес» — уникальный сетевой адрес узла в компьютерной сети, построенной по протоколу IP.
1.1.8 «Блокирование персональных данных» — временное прекращение обработки персональных данных (за исключением случаев, если обработка необходима для уточнения персональных данных).
1.1.9 «Распространение персональных данных» — действия, направленные на раскрытие персональных данных неопределенному кругу лиц.
1.1.10 «Предоставление персональных данных» — действия, направленные на раскрытие персональных данных определенному лицу или определенному кругу лиц.
1.1.11 «Трансграничная передача персональных данных» — передача персональных данных на территорию иностранного государства органу власти иностранного государства, иностранному физическому лицу или иностранному юридическому лицу.
2. ОБЩИЕ ПОЛОЖЕНИЯ
2.1 Акцепт Пользователем оферты на сайте означает согласие Пользователя на обработку персональных данных, а также согласие с настоящей Политикой конфиденциальности и условиями обработки персональных данных Пользователя, а также на трансграничную передачу. Оформление отдельного согласия на обработку персональных данных Пользователя не требуется.
2.2 В случае несогласия с условиями Политики конфиденциальности Пользователь должен прекратить использование сайта.
2.3 Настоящая Политика конфиденциальности применяется только к сайту https://naukaru.editorum.ru/ru/nauka/. Оператор не контролирует и не несет ответственность за сайты третьих лиц, на которые Пользователь может перейти по ссылкам, доступным на сайте.
2.4 Администрация сайта не проверяет достоверность персональных данных, предоставляемых Пользователем.
3. ПРЕДМЕТ ПОЛИТИКИ КОНФИДЕНЦИАЛЬНОСТИ
3.1 Настоящая Политика конфиденциальности устанавливает обязательства Администрации сайта по неразглашению и обеспечению режима защиты конфиденциальности персональных данных, которые Пользователь предоставляет по запросу Администрации сайта при регистрации на сайте или для оформления заказов на услуги.
3.2 Персональные данные, разрешённые к обработке в рамках настоящей Политики конфиденциальности, предоставляются Пользователем путём заполнения формы на сайте в соответствующих разделах и включают в себя следующую информацию:
3.2.1 фамилию, имя, отчество Пользователя;
3.2.2 адрес электронной почты (e-mail);
3.2.3 место жительство Пользователя;
3.2.4 платежные реквизиты Пользователя;
3.2.5 домашний, рабочий, мобильный телефоны.
3.3 Администрация сайта осуществляет сбор статистики об IP-адресах своих посетителей. Данная информация используется с целью выявления и решения технических проблем.
3.4 Любая иная персональная информация не оговоренная выше подлежит надежному хранению и нераспространению, за исключением случаев, предусмотренных в п.п. 5.2. и 5.3. настоящей Политики конфиденциальности.
4. ЦЕЛИ СБОРА ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ ПОЛЬЗОВАТЕЛЯ
4.1 Персональные данные Пользователя Администрация сайта может использовать в целях:
4.1.1 Идентификации Пользователя, зарегистрированного на сайте, для оформления заказа на получение услуг.
4.1.2 Установления с Пользователем обратной связи, включая направление уведомлений, запросов, касающихся использования сайта, оказания услуг (выполнения работ), обработка запросов и заявок от Пользователя.
4.1.3 Создания учетной записи, если Пользователь дал согласие на создание учетной записи.
4.1.4 Обработки и получения платежей, оспаривания платежа. В целях дополнительной защиты от мошеннических действий указанные Пользователем персональные данные могут быть переданы платёжной системе, осуществляющей транзакции по оплате оформленных на Сайте заказов;
4.1.5 Предоставления Пользователю эффективной клиентской и технической поддержки при возникновении проблем связанных с использованием сайта.
4.1.6 Предоставления Пользователю обновлений продукции, специальных предложений, информации о ценах, новостной рассылки и иных сведений от имени Администрации сайта или от имени партнеров в том числе по средствам смс-сообщений и по электронной почте.
4.1.7 Осуществления рекламной деятельности.
4.1.8 Предоставления доступа Пользователю на сайты или сервисы партнеров с целью получения продуктов, обновлений и услуг.
5. СПОСОБЫ И СРОКИ ОБРАБОТКИ ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ
5.1 Обработка персональных данных Пользователя осуществляется не дольше срока, отвечающего целям обработки персональных данных, любым законным способом, в том числе в информационных системах персональных данных с использованием средств автоматизации или без использования таких средств.
5.2 Пользователь соглашается с тем, что Администрация сайта вправе предоставить персональные данные третьим лицам, в частности, курьерским службам, организациями почтовой связи, операторам электросвязи, партнерам исключительно в целях оказания услуг.
5.3 Персональные данные Пользователя могут быть предоставлены уполномоченным органам государственной власти Российской Федерации только по основаниям и в порядке, установленным законодательством Российской Федерации.
5.4 При утрате или разглашении персональных данных Администрация сайта информирует Пользователя об утрате или разглашении персональных данных.
5.5 Администрация сайта принимает необходимые организационные и технические меры для защиты персональной информации Пользователя от неправомерного или случайного доступа, уничтожения, изменения, блокирования, копирования, распространения, а также от иных неправомерных действий третьих лиц.
5.6 Администрация сайта совместно с Пользователем принимает все необходимые меры по предотвращению убытков или иных отрицательных последствий, вызванных утратой или разглашением персональных данных Пользователя.
6. ОБЯЗАТЕЛЬСТВА СТОРОН
6.1 Пользователь обязан:
6.1.1 Предоставить информацию о персональных данных, необходимую для пользования сайтом.
6.1.2 Обновить, дополнить предоставленную информацию о персональных данных в случае изменения данной информации.
6.1.3 Пользователь имеет право отозвать согласие на обработку персональных данных, путем направления уведомления Оператору по адресу электронной почты: info@editorum.ru.
6.2 Администрация сайта обязана:
6.2.1 Использовать полученную информацию исключительно для целей, указанных в п. 4 настоящей Политики конфиденциальности.
6.2.2 Обеспечить хранение конфиденциальной информации в тайне, не разглашать без предварительного письменного разрешения Пользователя, а также не осуществлять продажу, обмен, опубликование, либо разглашение иными возможными способами переданных персональных данных Пользователя, за исключением п.п. 5.2. и 5.3. настоящей Политики Конфиденциальности.
6.2.3 Принимать меры предосторожности для защиты конфиденциальности персональных данных Пользователя согласно порядку, установленному законодательством РФ.
6.2.4 Осуществить блокирование персональных данных, относящихся к соответствующему Пользователю, с момента обращения или запроса Пользователя или его законного представителя либо уполномоченного органа по защите прав субъектов персональных данных на период проверки, в случае выявления недостоверных персональных данных или неправомерных действий.
7. ОТВЕТСТВЕННОСТЬ СТОРОН
7.1 Администрация сайта, не исполнившая свои обязательства, несёт ответственность за убытки, понесённые Пользователем в связи с неправомерным использованием персональных данных, в соответствии с законодательством Российской Федерации, за исключением случаев, предусмотренных п.п. 5.2., 5.3. и 7.2. настоящей Политики Конфиденциальности.
7.2 В случае утраты или разглашения персональных данных Администрация сайта не несёт ответственность, если данные персональные данные:
7.2.1 Стали публичным достоянием до их утраты или разглашения.
7.2.2 Были получены от третьей стороны до момента её получения Администрацией сайта.
7.2.3 Были разглашены с согласия Пользователя.
8. РАЗРЕШЕНИЕ СПОРОВ
8.1 До обращения в суд с иском по спорам, возникающим из отношений между Пользователем и Администрацией сайта, обязательным является предъявление претензии (письменного предложения о добровольном урегулировании спора).
8.2 Получатель претензии в течение 30 календарных дней со дня получения претензии, письменно уведомляет заявителя претензии о результатах рассмотрения претензии.
8.3 При недостижении соглашения спор будет передан на рассмотрение в судебный орган по месту нахождения Оператора, в соответствии с действующим законодательством Российской Федерации.
8.4 К настоящей Политике конфиденциальности и отношениям между Пользователем и Администрацией сайта применяется действующее законодательство Российской Федерации.
9. ДОПОЛНИТЕЛЬНЫЕ УСЛОВИЯ
9.1 Администрация сайта вправе вносить изменения в настоящую Политику конфиденциальности без согласия Пользователя.
9.2 Новая Политика конфиденциальности вступает в силу с момента ее размещения на сайте, если иное не предусмотрено новой редакцией Политики конфиденциальности.
9.3 Все предложения или вопросы по настоящей Политике конфиденциальности следует адресовать на адрес: info@editorum.ru
9.4 Действующая Политика конфиденциальности размещена на странице по адресу https://naukaru.editorum.ru/ru/nauka/.
ООО «Эдиторум» (адрес: 127282, г. Москва, ул. Полярная, д. 31В, стр. 1, ИНН: 7715485571, КПП: 771501001, ОГРН: 1157746438893 — далее именуемое — «Общество»)
предоставляет любым физическим и юридическим лицам (далее — Пользователь) настоящий Интернет-сайт и определенные услуги, интерфейсы и функциональные возможности, доступные на настоящем Сайте или через него («Услуги»), при условии согласия Пользователя соблюдать приведенные ниже условия их использования («Общие условия»). Использование Пользователем настоящего Сайта или пользование Услугами означает согласие Пользователя с Общими условиями. После принятия Общих условий они станут обязательным для исполнения соглашением между Обществом и Пользователем и будут регулировать использование Пользователем Сайта или пользование Услугами («Договор»). Если Пользователь не желает соблюдать Общие условия, он должен немедленно прекратить использование настоящего Сайта или Услуг.
Время от времени Общество может менять условия и положения, изложенные ниже. Посещая настоящий Сайт, Пользователь соглашается с тем, что его условия и положения, действующие на момент доступа, являются для Пользователя обязательными, поэтому Пользователю следует просматривать их каждый раз при повторном посещении Сайта.
Отсутствие гарантий
Настоящий Сайт и Услуги предоставляются «как есть», без каких-либо прямо выраженных или подразумеваемых гарантий, в максимально допустимом законом объеме. Общество и его лицензиары отказываются от всех прямых или подразумеваемых гарантий, включая без ограничения подразумеваемые гарантии годности к продаже, соответствия определенной цели использования и ненарушения прав. Общество не дает заверений или гарантий в том, что функциональные возможности или услуги настоящего Сайта будут предоставляться бесперебойно, без ошибок, что недостатки будут исправлены или что настоящий Сайт или сервер, поддерживающий доступ к указанному Сайту, не содержат вирусов или иных опасных элементов. Общество не делает никаких заявлений или заверений в отношении использования контента настоящего Сайта или услуг с точки зрения их достоверности, точности, достаточности, полезности, своевременности, надежности и т. д.
Ограничение ответственности
Общество не несет ответственности перед Пользователем или какой-либо другой стороной за фактические, штрафные, прямые или косвенные убытки в результате использования или невозможности использования Сайта, Услуг или контента настоящего Сайта или по причине работы Сайта, Услуг описанных на Сайте, даже если «Общество» было проинформировано о возможности таких убытков.
Если Пользователь недоволен каким-либо элементом Сайта или Услуг или какими-либо из изложенных условий, единственное и эксклюзивное средство защиты прав Пользователя заключается в том, чтобы прекратить использование Сайта и Услуг.
Обладание авторскими правами на Сайт
Сайт содержит материалы, такие как текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, защищенные авторским правом и/или другими правами интеллектуальной собственности. Услуги, Сайт и все размещенные на Сайте материалы, включая без ограничения текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, принадлежат Обществу или его лицензиарам и защищены законами Российской Федерации и других стран об авторском праве (в том числе в виде компиляции или базы данных), товарных знаках, базах данных и другой интеллектуальной собственности, а также международными соглашениями и конвенциями.
Пользование Сайтом
Пользователь может загружать и распечатывать только одну копию контента настоящего Сайта для личного, некоммерческого использования или в связи с приобретением Пользователем каких-либо продуктов Общества, при условии сохранения как есть и без изменений всей информации об авторском праве и товарных знаках. Пользователь дает согласие на соблюдение всех применимых законов об авторском праве, товарных знаках и других законов об интеллектуальной собственности, а также всех дополнительных уведомлений, указаний и ограничений в отношении авторского права и товарных знаков, приведенных в любом разделе Сайта. Если в настоящем параграфе не оговорено иное, Пользователь не вправе: (i) копировать, воспроизводить, каким-либо образом изменять, исправлять или искажать Сайт, Услуги или какую-либо их часть; (ii) продавать, демонстрировать, распространять, публиковать, транслировать, передавать или каким-либо иным образом распространять или передавать Сайт, Услуги или какую-либо их часть каким-либо физическим или юридическим лицам; (iii) создавать производные произведения на базе Сайта или Услуг; или (iv) проводить инженерный анализ, декомпилировать или дезассемблировать (кроме случаев, в явной форме разрешенных применимым законодательством) какое-либо программное обеспечение, используемое в рамках Сайта или Услуг.
Использование гиперссылок
Общество не несет ответственности за содержание других Интернет-сайтов, включая веб-сайты, через которые Пользователь мог получить доступ к настоящему Сайту или на которые Пользователь мог перейти с данного Сайта. Компания не несет никакой ответственности в связи с такими сайтами или ссылками.
Если предоставляются гиперссылки на Интернет-сайт третьей стороны, это делается с наилучшими намерениями и с тем убеждением, что такой веб-сайт содержит или может содержать материал, имеющий отношение к содержанию настоящего Сайта. Такая гиперссылка не означает, что Общество проверило или одобрило соответствующий сайт третьей стороны или его контент или что оно выражает одобрение, спонсирует или поддерживает аффилированные отношения с таким Интернет-сайтом, его владельцами или провайдерами.
Юрисдикция
Использование Пользователем настоящего Сайта и действие настоящих условий и положений регламентируются законодательством Российской Федерации. Суды Российской Федерации имеют эксклюзивную юрисдикцию в отношении всех споров, возникающих в связи с использованием вами настоящего Сайта. Посещая данный Сайт, Пользователь безоговорочно соглашается подчиниться юрисдикции государственных судов Российской Федерации по месту нахождения Общества.
Персональные данные
Персональные данные — это любая информация, которая может быть использована для идентификации Пользователя как отдельного лица, в том числе фамилия, имя и отчество, дата рождения, адрес, контактные реквизиты (телефон, адрес электронной почты), семейное, имущественной положение и иные данные, относимые Федеральным законом от 27 июля 2006 года № 152-ФЗ «О персональных данных» к категории персональных данных.
Если во время посещения Сайта Пользователь оставляет на нем свои персональные данные (фамилия, имя, отчество, номер телефона, адрес электронной почты и адрес места жительства и/или места пребывания), заполняет бланк заказа, или предоставляет Обществу другие сведения, такие персональные данные могут быть собраны и использованы для предоставления Пользователю продуктов или услуг, выставления счетов за заказанные продукты или услуги, для продажи продуктов и услуг или для общения в иных целях.
Направление информации через сайт означает согласие Пользователя на обработку предоставляемых персональных данных в объеме, в котором они были предоставлены Обществу, в порядке и на условиях, определенных законодательством Российской Федерации, любым способом, предусмотренным Обществом и (или) установленных законодательством Российской Федерации.
Целью обработки персональных является оказание Обществом и её партнерами услуг, а так же информирование об оказываемых Обществом и её партнерами услугах и реализуемых продуктах.
В случае отзыва согласия на обработку своих персональных данных Общество прекратит их обработку и уничтожит данные в срок, не превышающий трех рабочих дней с даты получения Обществом такого отзыва.
Отзыв согласия на обработку персональных данных должен быть осуществлен в письменной форме.
Общество может привлечь стороннюю организацию для оказания содействия по предоставлению вам запрошенной информации, продуктов и услуг. При таких обстоятельствах будут приняты меры с целью обеспечения того, чтобы персональные данные Пользователя хранились в строгом соответствии с политикой сохранения конфиденциальности Общества и использовались только для выполнения запросов Пользователя. Общество не продает и не раскрывает персональные сведения Пользователя третьим сторонам с тем, чтобы они могли продавать свои продукты или услуги Пользователю.
Данные, собираемые автоматически
Имя домена и IP адрес Пользователя регистрируются автоматически. Эти данные не являются личными сведениями и не идентифицируют Пользователя как отдельное лицо; они содержат только информацию о компьютере, используемом для просмотра Сайта. Такие данные используются для того, чтобы установить, в какой точке земного шара используется Сайт, для обеспечения полноты охвата, а также для анализа перехода по ссылкам с целью лучшего понимания особенностей использования Сайта. Общество не устанавливает связь между такими автоматически собираемыми данными и личными сведениями о конкретных людях.
Тем не менее, личные сведения могут быть собраны непреднамеренно при помощи автоматических функций коммерческого программного обеспечения третьей стороны, используемого для обеспечения работы серверов Общества. Если выяснится, что имел место такой сбор сведений, будут приняты разумные меры для удаления этих данных из систем Общества.
Чаты, доски объявлений и тематические конференции
Если в какой-либо момент времени на настоящем Сайте будет работать какой-либо чат, доска объявлений или форум, тематическая конференция и т. д., любая информация, которую Пользователь раскроет там, может быть собрана и использована в соответствии с настоящими Общими условиями. Общество не несет ответственности за использование другими сторонами любой информации, предоставляемой Пользователем указанным сторонам посредством чатов, досок объявлений, тематических конференций и других средств общения данного Сайта.
Безопасность
Общество реализует политики, правила и принимает технические меры безопасности для защиты личных сведений, находящихся под контролем Общества, в полном соответствии с законодательством по обеспечению конфиденциальности и защите данных, которое относится к юрисдикции, применимой к Сайту. Разработаны меры безопасности по предотвращению доступа, ненадлежащего использования или раскрытия, изменения, незаконного уничтожения или случайной потери данных.
Дети
Настоящий Сайт не предназначен для детей и не ориентирован на них. Общество преднамеренно не собирает сведения, поступающие от детей. Однако программное обеспечение, используемое для поддержания работы настоящего Сайта, автоматически не отличает посетителей моложе 18 лет от остальных пользователей, поэтому Общество требует, чтобы лица моложе 18 лет получили согласие родителя, опекуна, учителя или библиотекаря на просмотр настоящего Сайта. Если Общество обнаруживает, что ребенок разместил личные сведения на данном Сайте, то принимает разумные меры для удаления таких сведений из файлов компании.
Условия пользования, уведомления и новые редакции политики
Если Пользователь решает посетить данный Сайт, посещение и любой спор в отношении сохранения конфиденциальности регламентируются настоящими Общими условиями. Общество сохраняет за собой право вносить изменения в настоящую политику без уведомления Пользователей. Если Пользователь продолжает пользоваться Сайтом после внесения изменений в данную политику, это означает, что Пользователь принимает такие изменения.
Что именно надо сообщить о технической проблеме:
- Укажите тему запроса. Тема должна отражать краткую суть проблемы.
- Примеры тем: Ошибка при подаче статьи в журнал; Не удается сгенерировать договор; Не могу войти на портал;
- Какие темы писать не надо: «Ошибка!»; «Вопрос»; «Срочно!». Это никак не ускорит обработку заявки, но потребует больше времени для её обработки.
- Опишите проблему. Чем подробнее описана проблема, тем проще разобраться в ее причинах. Что надо указать:
- Что вы делали, перед тем как проблема возникла: Выполнил(а) вход в личный кабинет;
- Какой вы ожидали результат: Должен был открыться личный кабинет;
- Какой результат вы получили: Возникла такая-то ошибка, вылезло окошко с текстом и пр.
- В подписи укажите ФИО, название организации, город, контактный номер телефона для связи.
- Сопроводите обращение уточняющей информацией:
- Когда проблема возникла (Дата/Время). Как часто появляется;
- Приложите скриншот (снимок экрана) с ошибкой, если это возможно. Объем отправляемого сообщения, включая все приложения к нему, не должен превышать 15 Мб. В противном случае ваши письма будут отсечены системой;
- Укажите адрес домена, на котором вы работаете.
Как не надо писать обращения, такие обращения рассматриваются в последнюю очередь:
- «Ничего не работает! Срочно почините!»;
- «У меня тут программа раньше работала, а потом перестала. Когда снова заработает?»;
- «Я не могу работать. Позвоните мне!».
Сколько обращений надо написать?
- Необходимо придерживаться правила «одна ошибка — один запрос в поддержку». Если у вас две разных проблемы — «поправить контент» и «разместить свежий выпуск журнала» — сделайте две заявки.
- Нельзя создавать несколько обращений, посвященных одной проблеме чаще, чем раз в два часа. Повторные заявки замедляют работу техподдержки.
Время обработки заявки?
- Задания выполняются в порядке живой очереди, обычно выполнение работ занимает от нескольких часов до трех-четырех дней.
- Пожалуйста, не пишите в выполненные и закрытые задания, даже если это слово «Спасибо». Нам очень приятно, но это вносит беспорядок в систему отчетов и управления заданиями.
- Пожалуйста, четко формулируйте свой вопрос или задание. Сотрудники службы зачастую незамедлительно берут задание в работу, и поэтому многочисленные корректировки ведут как минимум к замедлению работ, а как максимум — к ошибкам.
Куда сообщать о технических проблемах?
- написать письмо на support@editorum.ru,
- заполнить форму обращения в техподдержку,
- написать нам в онлайн-чат.
Вы можете ознакомиться с инструкцией по работе с системой.