A number of topical problems related to geometric and graphic training of students of chemical directions of training a technical university in the study of the discipline "Engineering and computer graphics" are considered. Among these problems, one of the important is the weak basic graphic training of students, including due to the lack of manual drawing in secondary schools and professional educational organizations in the era of global digitalization and the active use of computer-aided design systems in the educational process. Key words: quality of education, engineering graphics, computer graphics, drawing, three-dimensional modeling, KOMPAS-3D, end-to-end graphic preparation. A study conducted in 2024 at the Federal State Budgetary Educational Institution of Higher Education "Yaroslavl State Technical University" (Yaroslavl) at the Department of Descriptive Geometry and Engineering Graphics among students of the Institute of Chemistry and Chemical Technology is described in order to determine the impact of manual drawing on the quality of graphic training of students in conjunction "sketching-manual drawing-computer graphics and three-dimensional modeling" and determine the place and role of manual drawing at present. As a result of the study, students are faced with difficulties when performing practical work both when sketching and manual mechanical engineering, and when using only software products for three-dimensional modeling and creating associative drawings and specifications. Methods have been developed to enhance the effectiveness of this discipline's educational process by harmoniously combining traditional manual drawing techniques with the creation of graphic documents in the KOMPAS-3D CAD system. Justifications are given for the need to form a regional model of end-to-end geometric and graphic training "School College - University”, which makes it possible to optimally approach the process of forming the content of educational disciplines at all levels of education and, thereby, improve the quality of training of university graduates.
quality of education, engineering graphics, computer graphics, drawing, three-dimensional modeling, KOMPAS-3D, end-to-end graphic training
1. Abrosimov S.N. Proektno-konstruktorskoe obuchenie inzhenernoy grafike: vchera, segodnya, zavtra [Tekst] / S.N. Abrosimov, D.E. Tihonov-Bugrov // Geometriya i grafika. — 2015. — T. 3. — № 3. — S. 47–57. — DOIhttps://doi.org/10.12737/14419 EDN: https://elibrary.ru/VHVTDD
2. Aleksyuk A.A. Laboratornyy praktikum po komp'yuternoy grafike [Tekst] / A.A. Aleksyuk // Geometriya i grafika. — 2017. — T. 5. — № 3. — S. 78–85. — DOIhttps://doi.org/10.12737/article_59bfa72b151052.53229281 EDN: https://elibrary.ru/WTEJHE
3. Boykov A.A. Problemy geometro-graficheskoy podgotovki studentov vuzov [Tekst] / A.A. Boykov, K.T. Egiazaryan, A.V. Efremov, N.S. Kadykova // Geometriya i grafika. — 2023. — T. 11. — № 1. — S. 4–22. — DOIhttps://doi.org/10.12737/2308-4898-23-11-1-4-22 DOI: https://doi.org/10.12737/2308-4898-2023-11-1-4-22; EDN: https://elibrary.ru/DQRRMT
4. Verutin M.G. Graficheskaya podgotovka inzhenerov-geologov v Gomel'skom gosudarstvennom universitete [Tekst] / M.G. Verutin, A.F. Akulevich // Formirovanie tvorcheskoy lichnosti inzhenera v processe graficheskoy podgotovki: Materialy Respublikanskoy nauchno-prakticheskoy konferencii, Vitebsk, 05 dekabrya 2008 goda. — Vitebsk: Vitebskiy gosudarstvennyy tehnologicheskiy universitet, 2008. — S. 65–67. EDN: https://elibrary.ru/FZMQFS
5. Verhoturova E.V. Reshenie uchebnyh i prikladnyh inzhenerno-stroitel'nyh zadach metodami komp'yuternoy grafiki [Tekst] / E.V. Verhoturova // Geometriya i grafika. — 2022. — T. 10. — № 4. — S. 46–58. — DOI:https://doi.org/10.12737/2308-4898-2022-10-4-46-58 EDN: https://elibrary.ru/EBISWV
6. Volkova M.Yu. Graficheskaya gramotnost' kak sposob polucheniya fundamental'nyh professional'nyh znaniy [Tekst] / M.Yu. Volkova, E.V. Egorycheva // Geometriya i grafika. — 2014. — T. 2. — № 1. — S. 53–57. — DOIhttps://doi.org/10.12737/3849 EDN: https://elibrary.ru/SEEIEV
7. Vyshnepol'skiy V.I. Metodicheskaya sistema provedeniya zanyatiy na kafedre «Inzhenernaya grafika» RTU MIREA [Tekst] / V.I. Vyshnepol'skiy, A.A. Boykov, K.T. Egiazaryan, N.S. Kadykova // Geometriya i grafika. — 2023. — T. 11. — № 1. — S. 23–34. — DOI:https://doi.org/10.12737/2308-4898-2023-11-1-23-34 EDN: https://elibrary.ru/BCSTZQ
8. Kozlova I.A. Graficheskie discipliny i informatizaciya inzhenernogo obrazovaniya [Tekst] / I.A. Kozlova, R.B. Slavin, B.M. Slavin // Geometriya i grafika. — 2022. — T. 10. — № 4. — S. 35–45. — DOI:https://doi.org/10.12737/2308-4898-2022-10-4-35-45 EDN: https://elibrary.ru/FXHKNJ
9. Kochurova L.V. Organizaciya sistemy kontrolya kachestva graficheskoy podgotovki [Tekst] / L.V. Kochurova, E.P. Aleksandrova, I.D. Stolbova, M.N. Kraynova // Geometriya i grafika. — 2016. — T. 4. — № 3. — S. 73–82. — DOI:https://doi.org/10.12737/21536 EDN: https://elibrary.ru/WMHZDF
10. Konstantinov A.V. Tehnicheskiy risunok v izuchenii osnov izobrazitel'noy gramoty [Tekst] / A.V. Konstantinov // Geometriya i grafika. — 2017. — T. 5. № 1. — S. 51–63. — DOI:https://doi.org/10.12737/25124 EDN: https://elibrary.ru/YJKKXN
11. Konstantinov A.V. Naglyadnost' izobrazheniy v tehnicheskom risunke [Tekst] / A.V. Konstantinov // Geometriya i grafika. — 2017. — T. 5. — № 3. — S. 67–77. DOI:https://doi.org/10.12737/article_5953f350da7151.85721309. DOI: https://doi.org/10.12737/article_59bfa6aba19b77.86685460; EDN: https://elibrary.ru/ZGWENJ
12. Matveeva M.V. K voprosu ob informacionno-graficheskoy podgotovke studentov v tehnicheskom vuze [Tekst] / M. V. Matveeva // Nauka i obrazovanie v zhizni sovremennogo obschestva: sbornik nauchnyh trudov po materialam Mezhdunarodnoy nauchno-prakticheskoy konferencii: v 14 t., Tambov, 30 aprelya 2015 goda. T. 12. — Tambov: Konsaltingovaya kompaniya Yukom, 2015. — S. 88–89 EDN: https://elibrary.ru/TTTECL
13. Nazarova O.N. Sovremennye problemy prepodavaniya kursa «prikladnaya geometriya i inzhenernaya grafika» dlya ekspluatacionnyh napravleniy aviacionnogo vuza [Tekst] / O.N. Nazarova // Geometriya i grafika. 2020. — T. 8. — № 2. — S. 58–65. — DOI:https://doi.org/10.12737/23084898-2020-58-65 DOI: https://doi.org/10.12737/2308-4898-2020-58-65; EDN: https://elibrary.ru/HPAQNA
14. Ovcharenko O. Vzaimnaya podderzhka i ispol'zovanie CAD-programm [Tekst] / O. Ovcharenko // Geometriya i grafika. — 2016. — T. 4. — № 2. — S. 64–69. — DOI:https://doi.org/10.12737/17348 DOI: https://doi.org/10.12737/19834; EDN: https://elibrary.ru/WJEJPP
15. Oyuunzhargal Ch. Tendencii obucheniya v inzhenernoy grafike [Tekst] / Ch. Oyuunzhargal, E. Oyuunzayaa // Geometriya i grafika. — 2022. — T. 10. — № 2. — S. 53–59. DOI:https://doi.org/10.12737/2308-4898-2022-10-2-53-59 EDN: https://elibrary.ru/MRFXQJ
16. Panchenko V.A. Sovremennye sredstva obucheniya graficheskim disciplinam studentov zaochnoy formy obucheniya [Tekst] / V.A. Panchenko // Geometriya i grafika. 2018. — T. 6. — № 4. — S. 72–87. — DOI: 10.12737/ article_5c21fa732f6b62.81431444 DOI: https://doi.org/10.12737/article_5c21fa732f6b62.81431444; EDN: https://elibrary.ru/YTZVAL
17. Piralova O.F. Podgotovka inzhenernyh kadrov s pomosch'yu graficheskih disciplin [Tekst] / O.F. Piralova, F.F. Vedyakin // Sovremennye problemy nauki i obrazovaniya. — 2009. — № 6. — S. 25–26.
18. Puzankova A.B. Optimizaciya inzhenerno-graficheskoy podgotovki studentov [Tekst] / A.B. Puzankova // Sovremennye informacionnye tehnologii i IT-obrazovanie. — 2012. — № 8. — S. 245–255. EDN: https://elibrary.ru/TJTQKV
19. Sal'kov N.A. Kachestvo geometricheskogo obrazovaniya pri razlichnyh podhodah k metodike obucheniya [Tekst] / N.A. Sal'kov // Geometriya i grafika. — 2020. — T. 8. № 4. — S. 47–60. — DOI:https://doi.org/10.12737/2308-4898-2021-84-47-60 DOI: https://doi.org/10.12737/2308-4898-2021-8-4-47-60; EDN: https://elibrary.ru/EYIVNV
20. Sal'kov N.A. Fenomen prisutstviya nachertatel'noy geometrii v drugih uchebnyh disciplinah [Tekst] / N.A. Sal'kov, N.S. Kadykova // Geometriya i grafika. — 2020. — T. 8. — № 4. — S. 61–73. — DOI:https://doi.org/10.12737/2308-4898-2021-8-4-61-73 EDN: https://elibrary.ru/XNZZGT
21. Sal'kov N.A. Mesto nachertatel'noy geometrii v sisteme geometricheskogo obrazovaniya tehnicheskih vuzov [Tekst] / N.A. Sal'kov // Geometriya i grafika. — 2016. T. 4. — № 3. — S. 53–61. — DOI:https://doi.org/10.12737/21534 EDN: https://elibrary.ru/WMHZCL
22. Sal'kov N.A. Nachertatel'naya geometriya — baza dlya komp'yuternoy grafiki [Tekst] / N.A. Sal'kov // Geometriya i grafika. — 2016. — T. 4. — № 2. — S. 34–47. DOI:https://doi.org/10.12737/19832. EDN: https://elibrary.ru/WJEJOL
23. Stolbova I.D. Ob obespechenii kachestva predmetnogo obucheniya studentov tehnicheskogo universiteta [Tekst] / I.D. Stolbova // Geometriya i grafika. — 2015. — T. 3. № 4. — S. 27–37. — DOI:https://doi.org/10.12737/17348. EDN: https://elibrary.ru/VQDUQD
24. Stolbova I.D. K voprosu o gotovnosti prepodavatel'skih kadrov k cifrovomu obucheniyu [Tekst] / I.D. Stolbova, K.G. Nosov, L.S. Tarasova // Geometriya i grafika. — 2022. — T. 10. — № 1. — S. 24–35. — DOIhttps://doi.org/10.12737/2308-4898-2022-10-1-24-35 EDN: https://elibrary.ru/TPDHDG
25. Tihonov-Bugrov D.E. Inzhenernaya grafika v svete rasstavaniya s bolonskim soglasheniem [Tekst] / D.E. Tihonov-Bugrov, S.N. Abrosimov // Geometriya i grafika. — 2022. — T. 10. — № 3. — S. 45–53. — DOIhttps://doi.org/10.12737/2308-4898-2022-10-3-45-53 EDN: https://elibrary.ru/AWASNN
26. Usanova E.V. Formirovanie bazovogo urovnya geometro-graficheskoy kompetentnosti v elektronnom obuchenii [Tekst] / E.V. Usanova // Geometriya i grafika. 2016. — T. 4. — № 1. — S. 64–72. — DOI:https://doi.org/10.12737/18059 EDN: https://elibrary.ru/VSFWXP
27. Fedoseeva M.A. Metodika podgotovki studentov tehnicheskih vuzov graficheskim disciplinam [Tekst] / M.A. Fedoseeva // Geometriya i grafika. 2019. — T. 7. — № 1. — S. 68–73. — DOI: 10.12737/ article_5c91fed8650bb7.79232969 DOI: https://doi.org/10.12737/article_5c91fed8650bb7.79232969; EDN: https://elibrary.ru/ZBHCNN
28. Husnetdinov T.R. Informacionnye tehnologii v geometro-graficheskoy podgotovke studentov kafedry «Komp'yuternye sistemy avtomatizacii proizvodstva» (RK9) [Tekst] / T.R. Husnetdinov, A.B. Mineev, L.G. Polubinskaya, B.G. Zhirnyh // Aktual'nye problemy gumanitarnyh i estestvennyh nauk. — 2017. № 2–2. — S. 64–66. EDN: https://elibrary.ru/XSHICL
29. Chernotalova K.L., Goncharenko E.E., Kirillovyh T.V. Napravleniya sovershenstvovaniya graficheskoy podgotovki v tehnicheskom universitete [Elektronnyy resurs] // Koncept / MCITO. — Kirov, 2014. № 6. — S. 131–135. — URL: https://cyberleninka.ru/article/n/napravleniya-sovershenstvovaniya-graficheskoypodgotovki-v-tehnicheskom-universitete (data obrascheniya: 04.11.2024).
