PECULIARITIES IN POLYMER LASER CUTTING
Authors:
1.
Bauman Moscow State Technical University
(docent)
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
2.
Bauman Moscow State Technical University
(kafedra "Lazernye tehnologii v mashinostroenii", docent)
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
3.
Bauman Moscow State Technical University
(inzhener)
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Type:
Article
Pages:
from 33
to 38
Status:
Published
Received:
09.09.2016
Accepted:
09.09.2016
Published:
09.09.2016
Language:
Russian, English
Keywords:
laser, polymeric materials, polymers.
Abstract (English):
In this paper the application of laser cutting methods for polymeric materials working is under consideration. The authors analyze the laser beam effect upon polymers reasoning from the peculiarities of their structure and properties. The methods to eliminate defects at polymer laser cutting, the methods to increase the interaction effectiveness of radiation with material, process quality are offered. To determine the dependences of a cut width and a value of flash formed at the beam input and its output of material worked there were carried out experiments at different rates and constant capacity of CO2-laser. According the results of the researches carried out the optimum working modes were established.
In this paper the application of laser cutting methods for polymeric materials working is under consideration. The authors analyze the laser beam effect upon polymers reasoning from the peculiarities of their structure and properties. The methods to eliminate defects at polymer laser cutting, the methods to increase the interaction effectiveness of radiation with material, process quality are offered. To determine the dependences of a cut width and a value of flash formed at the beam input and its output of material worked there were carried out experiments at different rates and constant capacity of CO2-laser. According the results of the researches carried out the optimum working modes were established.
Keywords:
laser, polymeric materials, polymers.
laser, polymeric materials, polymers.
1. Golubenko, Yu.V., Bondarev, А.V., Ponomarenko, К.V. Laser cutting of polymers and nonmetallic composites // Engineering Techniques. - 2005. - № 10. - pp. 57-59.
2. D. Schuocker, Ind. Las. Handhook, Ed.D. Belforte D.M. Levitt, Penwell, Tulsu, OK, 1987. pp. 65-79.
3. P. Sforza, V. Santecesaria. Proc. SPLE 2207, 1994. pp.836-847.
4. Makashov, N.К., Asmolov, Е.S., Blinov, V.V. // Quantum Electronics. - 1992. - №9. - pp. 910-915.
5. Kovalenko, V.S., Romanenko, V.V., Oleshchuk, L.М. Nonwaste Processes of Laser Cutting. - Kiev: Equipment, 1987.
