Bryansk, Bryansk, Russian Federation
Presents a scientifically based methodology for the selection and adjustment modes of the finish grinding of the friction surfaces of machine parts according to their required durability. Results over of experiments, characterizing influence of the modes of treatment on wearproofness of surface.
finishing abrasive processing, a choice of modes of cutting, wear resistance of a surface, technological maintenance of wear resistance.
1. Suslov, A.G. Engineering of the surface of components / A.G. Suslov, V. F. Bezjyazychny, Yu.V. Panfilov [etc.]; under the editorship of A.G. Suslov. - M.: Mechanical engineering, 2008. - 320 p.
2. Bishutin, S.G. Wear tolerance of the surface layers of machine parts when grinding / S.G. Bishutin, M. I. Prudnikov; under the editorship of S.G. Bishutin. - Bryansk: BSTU, 2010. - 100 p.
3. Bishutin, S.G. Quality and wearability of ground surfaces of vehicle parts / S.G. Bishutin. - Bryansk: Desyatochka, 2011. - 100 p.
4. Bishutin, S.G. Structuring of surface layers of parts in case of blast finishing/ S.G. Bishutin. - Bryansk: BSTU, 2009. - 100 p.
5. Bishutin, S.G. Introduction of the required set of quality parameters of surface layers of parts when grinding / S.G. Bishutin. - M.: Mechanical engineering-1, 2004. - 144 p.
6. Kragelsky, I.V. Friction units of machines / I.V. Kragelsky, N. M. Mikhin. - M.: Mechanical engineering, 1984. - 280 p.
7. Myshkin, N. K. Friction, lubrication, wear. Physical ground and technical applications of tribology / N. K. Myshkin, M. I. Petrokovets. - M.: Fizmatlit, 2007. - 368 p.
8. Pronikov, A.S. Reliability of the machines / A.S. Pronikov. - M.: Mechanical engineering, 1978. - 480 p.
9. Kraynev, A.F. Machinery design: Manual: in 2 Vol. / A.F. Kraynev, A.P. Gusenkov, V. V. Bolotin [etc.]; under the editorship of K.V. Frolov. - M.: Mechanical engineering, 1994. - Vol.2. - 624 p.
10. Advanced tools and grinding technologies: Collective Monograph / under the editorship of A.V. Kirichek. - M.: Publishing House SPEKTR, 2013. - 320 p.
11. Zubarev, Yu.M. Flat grinding. Equipment, tooling, technology / Yu.M. Zubarev, V. G. Yuryev, V. V. Zvonovskikh // Reference Book. Engineering journal. Annex. - 2014. - No. 11. - pp. 1 - 24.
12. Zubarev, Yu.M. Flat grinding. Equipment, tooling, technology (continuation) / Yu.M. Zubarev, V. G. Yuryev, V. V. Zvonovskikh // Reference Book. Engineering journal. Annex. - 2014. - No. 12. - pp. 1 - 24.
