SPECIFICATIONS TO THE ARTICLE "INFLUENCE OF A NEW POLYMERIC AND MINERAL ADDITIVE ON DURABILITY OF A WOOD AND CEMENT MATERIAL FOR LOW CONSTRUCTION"
Abstract and keywords
Abstract (English):
There are presented amendments to previously published data on the influence of polymer-mineral additive on the strength of wood-cement material. Wood component is waste as a mixture of sawdust and shavings conifers. If the additive amount is 5% by weight of the cement, the proportion of sawdust with increasing from 0 to 100%, the strength increases. Maximum strength without additive is 1.7 MPa. Maximum strength with additive is 2.3 MPa.

Keywords:
wood-cement material, polymer-mineral supplement «Nicoflok»
Text

Были определены средние значения прочности для пяти серий образцов древесно-цементного материала с полимерно-минеральной добавкой при различных соотношениях опилок и стружки в древесной составляющей. Число образцов в указанных сериях от трех до пяти включительно [1].

References

1. Andreev A.A., Vasil´ev SB., Kolesnikov G.N., Syunev B.C. Vliyanie novoy polimerno-mineral´noy dobavki na prochnost´ drevesno-tsementnogo materiala dlya maloetazhnogo stroitel´stva. Sbornik nauchnykh trudov po materialam mezhdunarodnoy zaochnoy nauchno-prakticheskoy konferentsii Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika. 2014. № 2-2 (7-2). S. 292-296. DOI:https://doi.org/10.12737/3157


Login or Create
* Forgot password?