Irkutsk, Irkutsk region, Russian Federation
Irkutsk, Irkutsk region, Russian Federation
The investigation results of orbital smoothing basic parameter impact upon deviations from roundness in strengthened cylindrical surfaces are shown. It is defined that after orbital smoothing a deviation from roundness decreases by two to three times, which has a positive impact upon shape precision increase in strengthened parts.
deviation from roundness, strengthening, orbital smoothing, deforming tool, strengthening modes
1. Papshev, D.D. Finish Strengthening with Surface Plastic Deformation. - M.: Mechanical Engineering, 1987. pp. 152.
2. Dunin-Barkovsky, I.V., Kartashova, A.N. Measurement and Analysis of Roughness, Rippling and Non-Roundness of Surface. - M.: Mechanical Engineering, 1978. - pp. 232.
3. Parts Surface Engineering/ authors’ group; under the editorship of A.G. Suslov. - M.: Mechanical Engineering, 2008. - pp. 320.
4. Suslov, A.G. Surface Layer Quality in Machinery. - M.: Mechanical Engineering, 2000. - pp. 320.
5. Suslov, A.G. Parameter State Technological Support of Parts Surface Layer. - M.: Mechanical Engineering, 1987. - pp. 208.
6. Technologist’s Reference Book / under the general editorship of Suslov A.G. - M.: Innovation Mechanical Engineering, 2019. - pp. 800.
7. Dyomkin, N.B., Ryzhov, E.V. Surface Quality and Machinery Contact. - M.: Mechanical Engineering, 1981. - pp. 244.
8. Dyomkin, N.B. Rough Surfaces Contacting. - M.: Science, 1970. - pp. 228.
9. Rakhimyanov, H.M., Semyonova, Yu.S. Technological support of surface quality geometrical parameters at ultrasonic plastic deformation // Metal Processing (technology, equipment, tools). - 2012. - No.3(56). - pp. 33-36.
10. Gorlenko, O.A. Technological support and operation index increase in machinery // Friction and Wear. - 1997. - Vol.18. - No.3. - pp. 361-368.
11. Lebedev, V.A. Efficient Technologies of Surface Plastic Deformation and Combined Processing/ under the editorship of A.V. Kirichek. - M.: “Spectrum” Publishers, 2014. - pp. 403.
12. Zaides, S.A. New methods for surface plastic deformation at machinery manufacturing // Bulletin of Nosov State Technical University of Magnitogorsk. - 2018. - Vol.16. - No.3. - pp. 129-139.
13. Zaides, S.A., Ngo Kao Kyong. Surface Deformation under Narrow Conditions: monograph. - Irkutsk: IRRITU Publishers, 2018. - pp. 236.
14. Technology and Tools for Parts Finish-Strengthening with Surface Plastic Deformation: reference book: in 2 Vol., Vol.1 / under the general editorship of A.G. Suslov. - M.: Mechanical Engineering, 2014. - pp. 480.
15. Zaides, S.A., Bobrovsky, I.N., Fam Van An. Local deformation kinematics impact upon stress state of surface layer // Science Intensive Technologies in Mechanical Engineering. - 2019. - No.5(95). - pp. 32-38.
16. Pat. the RF No.2705043 Device for Surface Plastic Deformation / Zaides S.A., Fam Van An; applied: …; pub-lished: 01.10.2019.
