SINGLE-STAGE SUPPORT OF FRICTION SURFACE WEAR INTENSITY AT EDGE PROCESSING
Authors:
1.
Bryansk State Technical University
(kafedra «Avtomatizirovannye tehnologicheskie sistemy», docent)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Type:
Article
Pages:
from 43
to 48
Status:
Published
Received:
14.02.2021
Accepted:
20.03.2021
Published:
20.03.2021
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
wear resistance; wear intensity; edge processing; surface layer quality; cutting modes
Abstract (English):
On the basis of the investigations carried out there are offered theoretical dependences for the determination of wear intensity with regard to cutting modes with edge tools. They allow defining optimum cutting modes to ensure the required intensity of friction surface wear at edge processing.
On the basis of the investigations carried out there are offered theoretical dependences for the determination of wear intensity with regard to cutting modes with edge tools. They allow defining optimum cutting modes to ensure the required intensity of friction surface wear at edge processing.
Keywords:
wear resistance; wear intensity; edge processing; surface layer quality; cutting modes
wear resistance; wear intensity; edge processing; surface layer quality; cutting modes
1. Suslov, A.G., Brawn, E.D., Vitkevich, N.A. Machine Quality: Reference book. In 2 Vol., Vol.1. - M.: Mechanical Engineering, 1995. - pp. 256.
2. Parts Surface Engineering / Author group; under the editorship of A.G. Suslov. - M.: Mechanical Engineering, 2009. - pp. 320.
3. Suslov, A.G., Dalsky, A.M. Scientific Fundamentals of Engineering Technique. - M.: Mechanical Engineering, 2002. - pp. 684.
4. Technologist’s reference book / under the general editorship of A.G. Suslov. - M.: Innovation Mechanical Engineering, 2019. - pp. 800.
