Belgorod, Russian Federation
graduate student
Belgorod, Belgorod, Russian Federation
UDK 66 Химическая технология. Химическая промышленность. Родственные отрасли
The ball mill has an energy efficiency of no more than 3.5 % (taking into account the measures taken to intensify the process of grinding the material). This is due to the imperfection of the design of the grinding unit, which consists in the fact that it is impossible to completely convert the mechanical energy accumulated by the grinding load into grinding energy (i.e., energy directly spent on the destruction of material particles). Most of the stored energy is converted into heat, noise, and vibration. The existing directions of intensification of the grinding process are as follows: improvement of the design, internal equipment of the cement mill; changes in the physical and chemical properties of the grinding medium; improvement of the grinding scheme. The authors of this article work in the direction of improving the internal equipment, which is reflected in the scientifically based selection of the range of grinding media for the fine grinding chamber, since the rational composition of the grinding load can significantly reduce the energy consumption of the grinding process. The authors continue to study the possibility of using a two-ball loading in a fine grinding chamber. This article provides a brief overview of the different ranges of two-ball grinding loadings, which differ from each other only in the range of grinding media. The possibility of a significant increase in the productivity of the mill when replacing the traditional grinding load with a rational two-ball is shown
clinker, productivity, grinding index, two-ball grinding loading, ball mill, clinker dispersion characteristics
1. Pirockij V.Z. Cement mills: technological optimization [Cementnye mel'nicy: tekhnologicheskaya optimizaciya]. SPb. Publishing house of the Center for Education Informatization 1999, 145 p. (rus).
2. Bogdanov V.S. Ball drum mills [Sharovye barabannye mel'nicy]. Belgorod: Publishing house of the BelGTASM, 2002, 258 p. (rus).
3. Gojsis M. Introduction to grinding technology [Vvedenie v tekhnologiyu pomola]. Bulletin of Cement and its application. 2014. No. 3. Pp. 36-41. (rus).
4. Kryhtin G.S., Kuznecov L.N. Mill intensification [Intensifikaciya raboty mel'nic]. Novosibirsk: VO "Science". Siberian publishing firm.1993, 240 p. (rus).
5. Potapova E.N., Sulimenko L.M. Influence of the nature of cement raw materials on the processes of structure formation during clinker firing [Vliyanie prirody cementnogo syr'ya na processy strukturoobrazovaniya pri obzhige klinkera]. Bulletin of Cement and its application. 2010. No. 1. Pp. 182-186. (rus).
6. Fedotov P.K. The main reason for the reduction in energy consumption during the destruction of ore in roller presses [Osnovnaya prichina snizheniya energopotrebleniya pri razrushenii rudy v roller-pressah]. Mining information and analytical bulletin. 2013. No. 3. Pp. 309-314. (rus).
7. Edet E. Grinding plant HOROMILL [Pomol'naya ustanovka HOROMILL]. Bulletin of Cement and its application. 2012. No. 1. Pp. 188-192. (rus).
8. Edet E. HOROMILL technology: twenty years of operation around the world [Tekhnologiya HOROMILL: dvadcat' let ekspluatacii v raznyh stranah mira]. Bulletin of Cement and its application. 2014. No. 1. Pp. 143-146. (rus).
9. Barbanyagre V.D., Stronin A.A. Influence on the granulometric composition of the clinker of the range of grinding media and the grinding intensifier [Vliyanie na granulometricheskij sostav klinkera assortimenta melyushchih tel i intensifikatora pomola]. Bulletin of BSTU named after V.G. Shukhov. 2018. No. 1. Pp. 71-75. (rus).
10. Stronin A.A., Barbanyagre V.D. Increasing the productivity of an open-loop ball mill using a double-ball charge [Uvelichenie proizvoditel'nosti sharovoj mel'nicy otkrytogo cikla ispol'zovaniem dvuhsharovoj zagruzki]. Materials of the X International Forum with International Participation. (01-15 October 2018). Belgorod: BSTU named after V.G. Shukhova. 2018. Pp. 1615-1619. (rus).
11. Pat. RU 2397813 C1, Russian Federation IPC B02C 17/22. Classifying lining of a cement mill. V.S. Bogdanov, N.P. Nesmeyanov, D.G. Circular; applicant and patentee State educational institution of higher professional education "Belgorod State Technological University named after VG Shukhov". 2009102796/03; declared 01/28/2009; publ. 27.08.2010.
12. Pat. RU 179532 U1, Russian Federation IPC B02C 17/22. Step lining of a ball drum mill. P.A. Khakhalev, V.S. Bogdanov, Yu.M. Fadin; applicant and patentee State educational institution of higher professional education "Belgorod State Technological University named after V.G. Shukhov". 2017146870; declared 12/28/2017; publ. 05/17/2018.
13. Cyrkun A.V., Shatohin I.I. Influence of intramill energy exchange devices on improving the operation of cement mills [Influence of intramill energy exchange devices on improving the operation of cement mills]. Mezhdunarodnaya nauchno-prakticheskaya konferenciya molodyh uchenyh BGTU im. V.G. Shuhova. Belgorodskij tekhnologicheskij universitet im. V.G. Shuhova. 2015. Pp. 1563-1566. (rus)
14. Tishkova I.S., Eremchenko S.M. Intra-mill energy exchange device [Intra-mill energy exchange device]. VII Mezhdunarodnyj molodezhnyj forum «Education, science, production». Belgorod: BGTU im. V.G. Shuhova, 2015. Pp. 1551-1553. (rus)
15. Pat. RU 2642088 C1, Russian Federation IPC B02C 17/20. Grinding body. G.A. Shchepochkin; applicant and patentee Shchepochkina Yulia Alekseevna. 2017100779; declared 01/10/2017; publ. 24.01.2018.
16. Pat. RU 119645 U1, Russian Federation IPC B02C 17/20. Grinding body. L.Z. Pisarenko, I.A. Busel, N.P. Metelsky, P.I. Busel; applicant and patent holder Closed Joint Stock Company Stroyizyskaniya, Limited Liability Company Izhgeostroy-M 2011122020/13; declared 05/31/2011; publ. 27.08.2012.
17. Hodakov G. S. Fine grinding of building materials [Tonkoe izmel'chenie stroitel'nyh materialov]. Publishing house of literature on construction 1972, 239 p. (rus)
18. Karibaev K. K. Surfactants in the production of binders [Poverhnostno-aktivnye veshchestva v proizvodstve vyazhushchih materialov]. Alma-Ata: "Science". 1980, 336 p. (rus)
19. Kotov S.V., Prohorenko K.L. Use of oil refining waste as intensifiers for cement grinding [Ispol'zovanie othodov neftepererabotki v kachestve intensifikatorov pomola cementa]. Advances in Chemistry and Chemical Technology DI. Mendeleev. 2010. Vol. 24. No. 6. Pp. 58-61. (rus)
20. Shahova L.D. Cherkasov R.A. Intensification of the clinker grinding process using a grinding intensifier [Intensifikaciya processa izmel'cheniya klinkera s primeneniem intensifikatora pomola]. Bulletin of BSTU named after V.G. Shukhov. 2014. No. 4. Pp. 148-152. (rus)
21. Gluharev N.F. Dry grinding under electrically neutralized conditions [Suhoe izmel'chenie v usloviyah elektronejtralizacii]. SPb. Publishing house of Polytechnic. University, 2014, 192 p. (rus)
22. Sharapov R.R. Closed cycle ball mills: monograph [Sharovye mel'nicy zakrytogo cikla: monografiya]. Belgorod. Publishing house: BSTU im. V.G. Shukhova, 2008, 270 p. (rus)
23. Ivanov A.N., Krot A.Yu., Krot O.P. Reducing the energy intensity of tube mills by pre-grinding [Snizhenie energoemkosti trubnyh mel'nic putem predizmel'cheniya]. National Technical University "Kharkiv Polytechnic University". 2014. No. 7. Pp. 48-54. (rus)
24. Pat 2477659, Russian Federation, IPC B02C 17/20. Ball loading of a drum mill. V.D. Barbanyagra; applicant and patentee State educational institution of higher professional education "Belgorod State Technological University named after V.G. Shukhov". No. 2010121271/13; declared 05/25/2010; publ. 03.20.2013. (rus)
