Belgorod, Belgorod, Russian Federation
Belgorod, Belgorod, Russian Federation
The aim of the authors’ research is to evaluate the results of using a programmable controller to manage the precise feed drive of a metal-cutting machine, and the ultimate aim of the research is to modernize decommissioned equipment and expand its functionality. The task set by the authors in the project implementation for modernizing the thread grinding machine was to assess the positioning accuracy of the working devices of the facilities, with the operational correction of the equipment drive discretization. A stepper motor managed by a logic controller was used as a drive; the same controller processed the data received from the linear displacement sensor. The authors used statistical methods for estimating the positioning error of the operating devices of the facilities, depending on its movement speed. In this case, the minimum and maximum values of the error were discarded according to the Grubbs criterion. In the experiment, the operational processing of the measurement results was used, followed immediately by the discrete correction in the control system. The findings of the study allowed obtaining a new method for discreet correction in the drive control, which made it possible to immediately evaluate the modernization results, without studying the facility transmission mechanisms. Implementing the findings allowed extending the equipment service life in the new capacity.
machine tool, drive, feed, control, positioning, controller, measurement, sensor, speed
1. Chepchurov M.S. Modernization of the Drive Con-trol of a Computer Numeric Control Milling Machine Using a PC. Repair, Reconditioning, Modernization. 2008, no. 7, pp. 13-15.
2. Averchenkov V.I., Zholobov A.A., Mrochek Zh.A. et al. CNC Machines in the Engineering of Production: Part 1. Moscow: Flint Publishing House, 2011. 216 p.
3. Programmable Controllers: an Engineer’s Guide. Moscow: BINOM, 2007.
4. Ismailov Sh.Yu. Automatic Systems and Devices with Step Motors. Moscow: Energiya, 1986. 136 p.
5. State Standard 21753-76*. Group T58. The State Standard of the USSR, Man-Machine System. Control Levers. General Ergonomic Requirements. Introduced on the 1st of January 1977 by the Decree of the USSR National Committee on Standards at the Cabinet of Ministers of April 27th, 1976 N 952, the introduction period was set from the 1st of January 1977.
6. State Standard 8.050-73. State System for Ensuring Uniformity of Measurements. Reference Conditions for Linear and Angular Measurements. Introduced by the Decree of the USSR National Committee on Standards at the Cabinet of Ministers dated February 21st, 1973 N 425, the introduction period was set from the 1st of January 1975. Moscow: Publishing House of Standards, 1988.
7. State Standard R 8.736-2011. Multiple Direct Measurements. Methods of Measurement Results Processing. Main Principles: National Standard of the Russian Federation: Approved and Introduced by the Order of the Federal Agency for Technical Regulation and Metrology dated December 13d, 2011 No 1045-st: introduced on the 1st of January 2013. Moscow: Standartinform, 2019.
8. State Standard 577-68. Clock-Type Dial Indicators Graduated in Unit Divisions of 0,01 mm. Specifications 17.040.30: introduced on the 1st of July 1968. Moscow: IPK Standards Publishing House, 2002.
9. Petrov I.V., Wagner R. Debugging of Applied PLC Programmes in CoDeSys. Industrial Controllers ACS, 2006, no. 4.
10. Chepchurov M.S. Certificate 2021660722. Russian Federation. Certificate of Official Registration of the Computer Programme. The Programme for controlling the Movement of Operating Devices of the Facilities; Applicant and Copyright Holder Belgorod State Technological University named after V.G. Shukhov. No. 2021661722; introduced on the 7th of July 2021; published on the 14th of July 2021.
