Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
The authors propose the concept of a control system based on the creation of avated biometric corrected neural network control system implemented on the basis tillage machines and tractors unit capable to function effectively within the system.For this approach, it is planned to develop a software system that provides for tracking the behavior of machine and tractor unit operator in real time. The resulting data will be fed to the input of artificial neural networks of different topologies.
tractor operated machinery, cultivator, slopes, lateral stability, control system, biometric neural network.
1. Avetisyan, R.D. Issledovanie ustoychivosti dvizheniya i upravlyaemosti kul´tivator-nykh agregatov pri mezhduryadnoy obrabotke propashnykh kul´tur na sklonakh [Tekst] : dis.... kand. tekhn. nauk : zashchishchena 19.02.74 / R.D. Avetisyan. - Erevan,1973. - 150 s.
2. Bartenev, I.M. Rabochie protsessy i novye tekhnicheskie sredstva obrabotki pochvy pri vyrashchivanii zashchitnykh lesnykh nasazhdeniy na sklonakh v zone nedostatochnogo i neus-toychivogo uvlazhneniya [Tekst] : dis.... dokt. tekhn. nauk: 05.21.01: zashchishchena 27.06.83 / I.M. Bartenev. - Volgograd, 1983. - 449 s.
3. Dontsov, I.E. Ustoychivost´ dvizheniya MTA s orudiyami frontal´noy ili zadney na-veski [Tekst] / I.E. Dontsov. Traktory i s.-kh. mashiny. - 2008. - № 9. - S. 31-34.
4. Turovskiy, Ya.A. Cheloveko-mashinnyy interfeys, uchityvayushchiy funktsional´noe napryazhenie cheloveka [Tekst] / Ya.A. Turovskiy, S.D. Kurgalin, A.A. Vakhtin, V.A. Belobrod-skiy. Programmnaya inzheneriya. 2015. № 3. S. 20-26.
5. Gee-Clough, D. The empirical prediction of tractor-implement field performance [Text] / D. Gee-Clough, M. McAllister, G. Pearso, D.W. Evernden. Journal of Terramechanics. - 1987. - no. 15. - pp. 81-94.
6. Glancey, J.L. Prediction of agricultural implement draught using an instrumented analog tillage tool [Text] / J.L. Glancey, S.K. Upadhyaya, W.J. Chancellor, J.W. Rumsey. Soil and Tillage Research. - 1996. - no. 37. - pp. 47-65.
7. Kheiralla, A.F. Modelling of power and energy requirements for tillage implements operat-ing in Serdang sandy clay loam, Malaysia [Text] / A.F. Kheiralla, A. Yahya, M. Zohadie, W. Ishak. Soil and Tillage Research. - 2004. - no. 78. - pp. 21-34.
8. Musil, J. Measuring of pulling resistance in machinery with passive working organs [Text]. J. Musil, J. Iervinka / Res. Agr. Eng. - 2007. - no. 53 (2). - pp. 47-53
9. Onwualu, A.P. Draft and vertical forces obtained from dynamics soil cutting by plane tillage tools [Text] / A.P. Onwualu, K.C. Watts. Soil and Tillage Research. - 1998. - no. 48. - pp. 239-253.
10. Subrata, K. Numerical modeling of soil flow and pressure distribution on a simple tillage tool using computational fluid dynamics [Text]. A thesis submitted to the faculty of graduate stu-dies and research. - University of Saskatchewan. - 2005. - 192 p.
