Moscow, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
Tashkent, Uzbekistan
Khimki, Moscow, Russian Federation
UDK 629.4 Тяга поездов на железных дорогах. Подвижной состав. Локомотивы. Вагоны. Служба подвижного состава
BBK 392 Железнодорожный транспорт
The problems related to the vibration effects of bulky elements on the cylindrical shell of tank car boilers are considered. To do this, an approach based on the shell theory is proposed. Donnell equations are used to define the loading during vibrations. Equations based on the theories of depressed cylindrical shells and on the polytechnic theory of shells are used. In order to confirm the reliability of the results obtained according to the proposed approach comparative analysis is performed. The rigidity of the attached cylindrical shell is estimated, for which experimental values of deformation under the local load are obtained. The results of calculations for the local single load of a closed cylindrical shell by means of finite element method (FEM) are given. These results show a satisfactory conformity with the data obtained experimentally (based on calculations). Using the proposed technique, the authors evaluated rigidity of the boiler cylindrical part where bulky elements are installed and this makes it possible to define the values of natural frequencies and the level of dynamic addition for various design parameters. Geometrics for tetra axial and eight axial tank cars are used as examples. Additionally, gain-frequency characteristics of deformations, accelerations and dynamic coefficients in the places of bulky elements are presented. Study results can be used to improve the design and the conditions for using tank car boilers.
tank car, strength, boiler, loading, theory, shell, rigidity
1. Awrejcewicz J, Krysko AV. Analysis of complex parametric vibrations of plates and shells using Bubnov-Galerkin approach. Archive of Applied Mechanics. 2003;73(7):495-504. doihttps://doi.org/10.1007/s00419-003-0303-8
2. Boychevsky OG, Dorodnitsina NV, Koturanov VN, Kamenomost ML, Chernyavsky GM. Analysis of the stress state and other qualities of an eight-axis tank: research report. Moscow: MIIT, Central Research Institute of MPS, VNIIV; 1965.
3. Koturanov VN. Analysis of the stress state and other qualities of an eight-axis tank: research report. Moscow: MIIT; 1964.
4. Babakov IM. Theory of oscillations. Moscow: Dropha; 2004.
5. Boyko A, Konovalova O. Calculation of the boiler strength of a tank car under cyclic loading. Proceedings of the 13th International Colloquium (IMM-2006), September 25-28, 2006: Mechanical Fatigue of Metals. Ternopil: TSTU; 2006.
6. GOST 33211 - 2014 Freight cars. Requirements for strength and dynamic qualities. Moscow: Stan-dartinform; 2016.
7. Grigoriev PS, Bespalko SV, Kodirov NS. A type of representing Donnell resolving equation of the semi-instantaneous theory of shells for calculations of the stressed state and stability of tank car boilers. Proceedings of the Second International Scientific and Technical Conference, 2023: Railway Rolling Stock: Problems, Solutions, Prospects. Tashkent: TGTrU; 2023.
8. Donnell LG. Beams, plates and shells. Moscow: Nauka; 1982.
9. Koturanov VN. Determination of internal forces in the shell cylindrical part of the tank boiler. Heavy eight-axle cars. Moscow: Transport; 1968.
10. Lukin, VV, Shadur LA, Koturnov VN, Khokhlov AA, Anisimov PS. Design and calculation of cars. Moscow: UMK MPS of Russia,;2000.
11. Nikulin MV. Experimental study of the strength of cylindrical shells under the action of local loads Strength and dynamics of aircraft engines: scientific papers. Mosocw: Mashinostroenie; 1966.
12. Grigoriev PS, Suvorova KE. Estimation of natural oscillation frequencies and dynamic stresses in the shell of a tank boiler. Proceedings of Petersburg Transport University. 2017;4:637 - 643.
13. Seregin SV. Dynamics of thin cylindrical shells with attached mass. Komsomolsk-on-Amur: KnAGTU; 2016.
14. Seregin SV. Qualitative effects of vibrations of reinforcing ring elements with attached mass, as a special case of an infinitely long thin circular cylindrical shell. BMSTU Journal of Mechanical Engineering. 2017;1(682):31-43.
15. Chan FT, Grigoriev PS, Suvorova KE. Calculated dependences and estimates of frequencies and forms of vibrations of the tank boiler shell. World of Transport. 2018;5(78):84-90.
16. Shagivaleev KF. Calculation of a closed cylindrical shell for concentrated loads. Vestnik of Yuri Gagarin State Technical University of Saratov. 2007;1(1):36-42.
