Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
Komsomolsk-on-Amur, Blagoveshchensk, Russian Federation
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
BBK 345 Общая технология машиностроения. Обработка металлов
The study objective is to increase turn process efficiency of corrosion-resistant stainless hard-to-machine steel 12X18H10T. The task is to reduce tool costs. Research methods are the following: full-field testing and simulation in deform software environment. The novelty of the work: a new approach is formed to increase the durability of a metal-cutting tool for turning the ends of workpieces. This made it possible to find out the most rational coatings for different operating conditions. Research results: recommendations are developed to choose a rational coating for hard alloy of VK8 grade.
turning, ends, workpieces, parts, coatings, VK8 alloy, comparison, periods, durability, tool
1. Sitamov ES, Mokritsky BYa. Results of a comparative study of a carbide tool wear resistance while processing corrosion-resistant steel. Metalloobrabotka. 2018;4(106):7-13.
2. Sablin PA, Shchetinin VS, Mokritskiy BYa, Yurchenko MS. Control of surface roughness when processing workpieces made of hard-to-process and hardened materials. Strengthening Technologies and Coatings. 2023;19(2):59-63. DOI:https://doi.org/10.36652/1813-1336-2023-19-2-59-63.
3. Mokritskiy BYa, Kosmynin AV, Sablin PA, Grigoriev VV, Shelkovnikov VYu. On the use of coatings for turning stainless steels. Transport Engineering. 2023;04:4-10. doi:https://doi.org/10.30987/2782-5957-2023-4-4-10.
4. Mokritskiy BYa, Kazarov AV. Analysis of the effect of various coatings on stress distribution in instrumental material. Strengthening Technologies and Coatings. 2023;19(5):195-197. DOI:https://doi.org/10.36652/1813-1336-2023-19-5-195-197.
5. GOST 19049-80. Square throw-away (indexable) carbide cutting inserts. Design and dimensions. Moscow: Standartinform; 2006.
6. GOST 19086-80. Throw-away (indexable) carbide inserts. Specifications. Moscow: Standartinform; 2006.
7. Grigoriev SN. Methods of increasing the strength of a cutting tool (textbook for students) Moscow: Machinostroenie; 2009.
8. Vereshchaka AS, Tretyakov IP. Cutting tools with wear-resistant coatings. Moscow: Mashinostroenie; 1986.
9. Ostafyev VA. Taking into account the strength of the tool in its design and operation. Stanki I Instrument. 1983;7:19-20.
10. Uteshev MH, Sinyukov VA. Stressed state of the cutting part of the tool with a rounded cutting edge. Soviet Engineering Research. 1970;2:70-73.
11. Deederich N. Metallisher Zwischeushichten im Bereich der Aufbanschneidesbildung. Ind. -Anz. 1968;90(24):457-460.
12. Fuch M, Scheffer M. Ab initio pseudopotentieals for electronic structure calgulations of polu-atomic sustems using density-finctional theory.//Comp. Phys. Commun. 1999;119:67-11.
13. Iochen M Schneider. Effect of transition metal additives on electronic structure and elastic properties of TiAl and Ti3Al. Phys. Rev. 2006;74:174110.
