Bryansk, Bryansk, Russian Federation
BBK 346 Отдельные машиностроительные и металлоперерабатывающие процессы и производства
The study objective: to show the main problems of using unified components (modules) in the design and manufacture by means of modular approach. Task: to find the main problems and solutions when using machine tools in manufacture and design of equipment using two item samples; to consider the hardness of various modules. Research methods: experimental studies to determine the micro-hardness of machine modules. Design and manufacture of equipment in practice. The novelty of the work: Machine tools and the complexity of their application are considered. Micro-hardness diagrams of some machine modules are shown. Research results: some of the problems with the use of machine tools in the design are shown. Experimental studies of measuring the micro-hardness of various modules are performed. Conclusions: The use of machine tools makes it possible to reduce the production time of equipment and facilitates design processes. But there are a number of problems that need to be addressed. So far, it is not always possible change one module to another without additional refinement.
modular principle, manufacturing, equipment, design, parts, nodes
1. Kirichek AV, Zhirkov AA, Fedonina SO. Modern trends in developing modular equipment. Bulletin of Bryansk State Technical University. 2015;4(48):100. – DOI https://doi.org/10.12737/17145
2. Martynenko OV. Application of the modular principle in design and operation analysis. International Journal of Applied and Fundamental Research. 2016;12-4:605-608.
3. Gostry NE, Pletnev VA. Design of metal-cutting machines according to the modular principle [Internet]. All-Russian Scientific and Technical Conference, April 5-8, 2016: Student Scientific Spring: Machine–building Technologies. Moscow, Bauman Moscow State Technical University; KvantorForm LLC; 2016.
4. Averyanov OI, Modular principle of CNC machine tool construction. Moscow: Mashinostroenie; 1987.
5. Volosatova TM, Barsukov DA, Tamkov PI. Analysis of directions for using the principle of modularity in the development of training projects on robotics in universities. The Caspian Journal: Management and High Technologies. 2020;4(52):133-148.
6. Krylova AA. Research and development of modular production equipment for single and small-scale production [dissertation]. [St. Petersburg (RF)]: 2021.
7. Zakharov LA, Shcherbakov AN, Khandozhko AV, Fedonin ON, Polsky EA. Machine-tool design using common parts. Science Intensive Technologies in Mechanical Engineering. 2016;10:20-25. DOI: https://doi.org/10.12737/21424
8. Fedukov AG. Method to design linear displacement modules based on unified modules. Transport Engineering. 2022; 12:26-35.
9. Fedukov AG. Analysis of contact approach in flat joints of special equipment when using unified modules. Transport Engineering. 2023; 1:4-13.
10. Catalog of HIWIN company for the production of linear guides.
11. Catalog of HIWIN company for the production of ball drives.
12. Grubiy SV, Lapshin VV. Study of cutting properties of boron nitride cutters. Science and Education. 2012;6:5. DOIhttps://doi.org/10.7463/0612.0423622.
13. Belkov VN. B44 Fundamentals of calculation and design of screw mechanisms: textbook. Omsk: Publishing house of OmSTU; 2008.
