employee
Bryansk, Bryansk, Russian Federation
employee from 01.01.2001 to 01.01.2006
Bryansk, Bryansk, Russian Federation
UDK 539.43 Прочность при повторяющихся нагрузках
BBK 343 Металлургия
BBK 344 Общее машиностроение. Машиноведение
The working conditions of rotary furnace main components and the reasons for reaching the limit state of the bearing rollers of rotary furnaces are considered. Using Ishikawa diagram, the factors leading to these causes are grouped. Special attention is paid to the factors affecting the condition of the surface layer of bearing rollers.
rotary furnaces, bearing rollers, friction, wear, creep
1. Lisienko VG, Shchelokov YaM, Ladygichev MG. Rotary furnaces: heat engineering, management and ecology. Moscow: Teplotekhnik; 2004.
2. Kozlovsky EA, Kozlovsky AE, Povtarev AE. Drum rotary devices: textbook. Ivanovo: ISTUCT; 2019.
3. OST 26-01-147-89 Drying machines with rotating barrels. Specifications. Moscow; 1989.
4. Azarkin AA, Makarenko KV. Study of the influence of working heating on achieving the limiting state of the support rollers of rotary furnaces. Collection of Scientific Papers of the National Conference, February 07-10, 2024: Actual Issues of Engineering, Science, Technology. Bryansk: BSTUE; 2024.
5. http://www.greatwallcasting.com/newsroom/surface-of-rotary-kiln-supporting-roller.html
6. Spitsnadel VN. Quality systems (in accordance with international standards ISO family 9000): textbook. St. Petersburg: Publishing house "Business Press"; 2000.
7. Dennis A. Vincenzi, editors. Human factors in simulation and training. CRC Press: Taylor and Francis Group; 2009.
8. Kuzmich YuV, Kolesnikova IT, Serba VI, Freydin BM. Mechanical alloying. Moscow: Nauka; 2005.
9. Goncharov MS. Technological support for contact meters of rotary furnace supports by improving mobile rolling surface treatment technology [dissertation]. [Belgorod (RF)]: Belgorod State Technological University named after V.G. Shukhov; 2019.
10. Shrubchenko IV. Technological bases for ensuring contact shape and conditions of rolling surfaces of technological drum supports during machining with mobile equipment [dissertation]. [Moscow (RF)]: Moscow Aviation Institute; 2007.
11. Boateng AA. Rotary kilns: transport phenomena and transport processes. Oxford: Elsevier; 2016.
12. Sofich DO, Mashovich AYa. Recycling of silicon production waste. Proceedings of the All-Russian Scientific and Practical Conference, November 27-28, 2013: Ecology and Safety in Technosphere : Modern Problems and Solutions. Moscow-Berlin: DirectMedia; 2015.
13. Kai Zheng, Yun Zhang, Chen Zhao and Lei Liu. Rotary kiln cylinder deformation measurement and feature extraction based on EMD method. Article in Engineering Letters [Internet]. November 2015. Available from: https://www.researchgate.net/publication/285470858_Rotary_Kiln_Cylinder_Deformation_Measurement_and_Feature_Extraction_Based_on_EMD_Method
14. RD 26-01-158-86. Drying machines with rotating drums. Norms and methods of strength calculation. Moscow; 1986.
