Analysis methods hardening and their influence on tribological characteristics friction units

Yu. Gradyskiy; A. Karpusenko

doi:10.12737/6967

ANALYSIS METHODS HARDENING AND THEIR INFLUENCE ON TRIBOLOGICAL CHARACTERISTICS FRICTION UNITS Analysis methods hardening and their influence on tribological characteristics friction units

АА Аа

Published in Actual directions of scientific researches of the XXI century: theory and practice · Volume 2, Issue 5, p. 3 · Pages 221–225 · Rubric: Sekciya «Tehnika i tehnologii v sel'skom hozyaystve»

DOI: https://doi.org/10.12737/6967

Received: 04.12.2014 Accepted: 04.12.2014 Published: 04.12.2014 Language of publication: RUS

Authors

Yu. Gradyskiy

A. Karpusenko

Yu. Gradyskiy

A. Karpusenko

ABSTRACT

a comprehensive analysis of methods of treatment and surface hardening tribological nodes working in conditions of friction and wear. The methods of hardening contain a innovative elements. It is concluded that the benefits of the discussed methods over traditional hardening hardening.

KEYWORDS

wear, surface, material, item, processing, method

Text

УДК 621.891

АНАЛИЗ МЕТОДОВ УПРОЧНЕНИЯ И ИХ ВЛИЯНИЕ НА ТРИБОТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ УЗЛОВ ТРЕНИЯ

ANALYSIS METHODS HARDENING AND THEIR INFLUENCE ON TRIBOLOGICAL CHARACTERISTICS FRICTION UNITS

ГрадыскийЮ.А.,к.т.н., доц.;

КарпусенкоА.В.,аспирант

Харьковский национальный технический университет сельского хозяйства имени Петра Василенко

г. Харьков, Украина

DOI: 10.12737/6967

Аннотация: проведен всесторонний анализ методов обработки и упрочнения поверхностей триботехнических узлов, работающих в условиях трения и износа. Описаны способы упрочнения, содержащие в себе инновационные элементы. Сделан вывод о преимуществах рассмотренных способов перед традиционным укреплением закалкой.

Summary: a comprehensive analysis of methods of treatment and surface hardening tribological nodes working in conditions of friction and wear. The methods of hardening contain a innovative elements. It is concluded that the benefits of the discussed methods over traditional hardening hardening.

Ключевые слова: износостойкость, поверхность, материал, деталь, обработка, метод

Keywords: wear, surface, material, item, processing, method

1. Poverkhnostnaya prochnost´ materialov pri trenii / B.I. Kostetskiy, I.G. Nosovskiy, A.K. Karaulov, L.I. Bershadskiy. - K.: Tekhnika, 1978. - 296 s.

2. Epik A.P., Shavlovskiy E.N., Mironov E.A. i dr. Issledovanie svoystv diffuzionnykh karbidnykh i boridnykh pokrytiy na konstruktsionnykh stalyakh. FKhMM. - 1979. - T.14, №5. - S. 67 - 70.

3. Mishin V.N., Shadrichev E.V. Issledovanie iznosostoykosti borirovanoy stali. Dokl. 25 yubil. nauch. - tekhnich. konf. Sev. - Zap. zaochn. politekh. in - ta - Leningrad, 1981. - S. 40 - 44.

4. Mash D.R., Weare D.L., Walkaz Z. - Jorn. of Met. - 1963. - vol. 7, №13. - P. 473.

5. Guslienko Yu.A., Labunets V.F., Evtushenko O.V. Primenenie vysokochastotnogo nagreva dlya termicheskoy obrabotki kombinirovannykh elektroliticheskikh pokrytiy. Zashchitnye pokrytiya na metallakh. - 1981. - Vyp 15. - S. 28 - 31.

6. Fedorchenko I.M., Guslienko Yu.A., Luchka M.V. Khimiko-termicheskaya obrabotka metallov i splavov s elektrokhimicheskimi pokrytiyami: obzor. Zashchitnye pokrytiya na metallakh. - 1981. - Vyp. 51. - S. 24-28.

7. Sivtsev A.T., Shkurko N.V., Akhanch´ev V.P. Ionnoe azotirovanie avtomobil´nykh detaley. MiTOM. - 1979. - №8. - S. 54 - 56.

8. Bergel K., Leidel V. Sravnitel´noe issledovanie instrumental´nykh staley azotirovannykh razlichnymi sposobami i sravnenie ekspluatatsionnoy stoykosti shtampov goryachego pressovaniya. Harter. - Techn. Mitt. - 1980. - 35, №1 - R. 11 - 16.

9. Kizk I.A., Egerton G.W., Sartwell B.D. Iznos i trenie stali implantirovannoy ionami azota. Trans. ASME: J. Lubric, Technol. - 1983. - 105, №2. - R. 239 - 344.

10. Yashcheritsin P.I., Zabavskiy M.T., Kozhuro L.M. Almazno- abrazivnaya obrabotka i uprochnenie izdeliy v magnitnom pole. - Minsk: Nauka i tekhnika, 1988. - 271 s.

11. Orlov Yu.G., Gal´go V.I., Kozhuro L.M. i dr. Iznosostoykost´ elektromagnitnykh pokrytiy. Zashchitnye pokrytiya na metallakh. - 1994. - Vyp. 28. - S. 59-61.

This work is licensed under Creative Commons Attribution 4.0 International

JATS XML

Responsible secretary

Igor Shanin

kingoao@mail.ru

This work is licensed under Creative Commons Attribution 4.0 International Creative Commons

GOST

Gradyskiy Y., Karpusenko A. Analysis methods hardening and their influence on tribological characteristics friction units // Actual directions of scientific researches of the XXI century: theory and practice. 2014. no. 5. pp. 221-225. DOI: https://doi.org/10.12737/6967. (Date of access 14.10.2026).

MLA

Yu. Gradyskiy, Karpusenko A.. "Analysis methods hardening and their influence on tribological characteristics friction units." Actual directions of scientific researches of the XXI century: theory and practice 2.5 (2014): 221-225. DOI: https://doi.org/10.12737/6967.

APA

Gradyskiy Y., Karpusenko A. (2014). Analysis methods hardening and their influence on tribological characteristics friction units. Actual directions of scientific researches of the XXI century: theory and practice, 2(5), 221-225. https://doi.org/10.12737/6967

Chicago

Yu. Gradyskiy, Karpusenko A.. "Analysis methods hardening and their influence on tribological characteristics friction units." Actual directions of scientific researches of the XXI century: theory and practice 2, no. 5 (2014): 221-225. https://doi.org/10.12737/6967.

WIKI

{{cite journal | author = Gradyskiy Y., Karpusenko A. | title = Analysis methods hardening and their influence on tribological characteristics friction units | journal = Actual directions of scientific researches of the XXI century: theory and practice | year = 2014 | volume = 2 | issue = 5 | pages = 221-225 | doi = 10.12737/6967 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

ANALYSIS METHODS HARDENING AND THEIR INFLUENCE ON TRIBOLOGICAL CHARACTERISTICS FRICTION UNITS Analysis methods hardening and their influence on tribological characteristics friction units

Confirmation