Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop

Ekaterina A. Muzhzhuhina; S. Nikolenko; Svetlana Sazonova

doi:10.12737/2219-0767-2022-15-2-24-33

UDC 620.179

MODELING OF THE STRESS STATE AND DETERMINATION OF THE STRENGTH CHARACTERISTICS OF MATERIALS OF SUPPORTING STRUCTURES OF AN INDUSTRIAL WORKSHOP Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop

АА Аа

Published in Modeling of systems and processes · Volume 15, Issue 2 · Pages 24–33 · Rubric: Tehnicheskie nauki

DOI: https://doi.org/10.12737/2219-0767-2022-15-2-24-33

Received: 22.06.2022 Accepted: 27.06.2022 Published: 27.06.2022

Authors

Ekaterina A. Muzhzhuhina

S. Nikolenko

Svetlana Sazonova

Ekaterina A. Muzhzhuhina

Voronezh State Technical University Voronezh

S. Nikolenko

Voronezh State Technical University Voronezh

Svetlana Sazonova

Russian Federation

ABSTRACT

The paper presents a part of the results of a full-scale inspection of the molding shop of an industrial enterprise. The results of tests of masonry materials of the shop's enclosing walls by the shock pulse method using the ONIKS 2.5 device are presented. As a result, it was found that the grade for the compressive strength of the ceramic bricks of the walls corresponds to M100, and the grade of the masonry cement-sand mortar of the walls of the building corresponds to M50. The results of concrete testing by the non-destructive method of testing the strength using the DigiShmidt 2000 device were presented. As a result, it was established that the compressive strength class of concrete in reinforced concrete slabs of the pavement corresponds to B10, in reinforced concrete beams of the pavement - B40, in reinforced concrete crane beams of the covering - B15, in reinforced concrete columns of the building - B15. Instrumental studies were carried out using non-destructive testing methods, and verification calculations were carried out using a computer. The results of the verification calculations carried out according to the proposed method showed the sufficient bearing capacity of the roof beams, columns and foundations of the workshop building under the full design load. Based on the results of the survey, a verification calculation of the workshop frame was carried out. In general, the calculation showed sufficient strength of the entire load-bearing structures of an industrial building.

KEYWORDS

Modeling, technical inspection, industrial building, brickwork strength, concrete strength, verification calculations, computer program calculations

1. SP 13-102-2003 Pravila obsledovaniya nesuschih stroitel'nyh konstrukciy zdaniy i sooruzheniy. - M.: Gosstroy Rossii, 2004. -41 c.

2. GOST R 53778-2010 Zdaniya i sooruzheniya. Pravila obsledovaniya i monitoringa tehnicheskogo sostoyaniya. - M., 2010. - 65 c.

3. Mihnevich, I.V. Sravnitel'noe issledovanie harakteristik materialov, primenyaemyh v bystrovozvodimyh sooruzheniyah / I.V. Mihnevich, S.D. Nikolenko, A.V. Cheremisin // Nauchnyy vestnik Voronezhskogo gosudarstvennogo arhitekturno-stroitel'nogo universiteta. Stroitel'stvo i arhitektura. - 2016. - № 1 (41). - S. 48-55.

4. GOST R 54257-2010 Nadezhnost' stroitel'nyh konstrukciy i osnovaniy. Osnovnye polozheniya i trebovaniya. - M., 2011. - 22 c.

5. SP 52-101-2003 Betonnye i zhelezobetonnye konstrukcii bez predvaritel'nogo napryazheniya armatury. - M., 2004. - 59 s.

6. Mihnevich, I.V. Konstruktorskoe reshenie i tehnologiya bystrovozvodimogo sooruzheniya dlya primeneniya v zonah chrezvychaynyh situaciy / I.V. Mihnevich, A.V. Rybakov, S.D. Nikolenko // Nauchnye i obrazovatel'nye problemy grazhdanskoy zaschity. - 2019. - № 1 (40). - S. 66-75.

7. Mihnevich, I.V. Issledovanie vliyaniya teplovogo vozdeystviya na prochnostnye harakteristiki betona / I.V. Mihnevich, S.D. Nikolenko // Nauchnyy zhurnal stroitel'stva i arhitektury. - 2017. - № 3 (47). - S. 43-51.

8. Patent na izobretenie RU 2371555 C1 Sooruzhenie, vozvedennoe na nes'emnoy pnevmaticheskoy opalubke : № 2008122797/03 : zayavl. 05.06.2008 ; opubl. 27.10.2009 / S.D. Nikolenko, D.A. Kazakov ; zayavitel' i patentoobladatel' GOU VPO VGASU.

9. Sazonova, S.A. Simulation of a transport standby for ensuring safe heat supply systems operation / S.A. Sazonova, S.D. Nikolenko, A.A. Osipov // IOP Conference Series: Materials Science and Engineering. International science and technology conference "FarEastCon-2019". - 2020. - P. 052004. - DOI:https://doi.org/10.1088/1757-899X/753/5/052004.

10. Development and application of a portable lightweight sound suppression panel to reduce noise at permanent and temporary workplaces in the manufacturing and repair workshops / V.F. Asminin, E.V. Druzhinina, S.A. Sazonova, D.S. Osmolovsky // Akustika. - 2019. - V. 34. - Pp. 18-21.

11. Sysoev, D.V. Variational method for solving the boundary value problem of hydrodynamics / D.V. Sysoev, A.A. Sysoeva, S.A. Sazonova, A.V. Zvyagintseva, N.V. Mozgovoj // IOP Conference Series: Materials Science and Engineering. Krasnoyarsk Science and Technology City Hall., Krasnoyarsk, Russian Federation. - 2021. - P. 12195. - DOI:https://doi.org/10.1088/1757-899X/1047/1/012195.

12. Behaviour of concrete with a disperse reinforcement under dynamic loads / S.D. Nikolenko, E.A. Sushko, S.A. Sazonova [et al.] // Magazine of Civil Engineering. - 2017. - № 7 (75). - Pp. 3-14. - DOI:https://doi.org/10.18720/MCE.75.1.

13. Flexural strength of fiber reinforced concrete structures / S.D. Nikolenko, S.A. Sazonova, V.F. Asminin [et al.] // IOP Conference Series. Krasnoyarsk Science and Technology City Hall. Krasnoyarsk, Russian Federation, 2021. - P. 22075. - DOI:https://doi.org/10.1088/1742-6596/1889/2/022075.

14. Weld defects and automation of methods for their detection / S.A. Sazonova, S.D. Nikolenko, A.A. Osipov [et al.] // IOP Conference Series. Krasnoyarsk Science and Technology City Hall. Krasnoyarsk, Russian Federation, 2021. - P. 22078. - DOI:https://doi.org/10.1088/1742-6596/1889/2/022078.

15. Proskurin, D.K. Shodimost' vychislitel'nogo processa pri realizacii variacionnogo metoda resheniya kraevoy zadachi gidrodinamiki / D.K. Proskurin, D.V. Sysoev, S.A. Sazonova // Vestnik Voronezhskogo gosudarstvennogo tehnicheskogo universiteta. - 2021. - T. 17, № 3. - S. 14-19.

16. Zol'nikov, V. K. Prakticheskie metodiki vypolneniya verifikacii proektirovaniya mikroshem / V.K. Zol'nikov, S.A. Evdokimova, T.V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 25-30. - DOI:https://doi.org/10.12737/article_5d639c80d03ac5.18926339.

17. Zol'nikov, V.K. Verifikaciya proektov i sozdanie testovyh posledovatel'nostey dlya proektirovaniya mikroshem / V.K. Zol'nikov, S.A. Evdokimova, T.V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 10-16. - DOI:https://doi.org/10.12737/article_5d639c80c07798.20924462.

18. Zol'nikov, V.K. Metody verifikacii slozhno-funkcional'nyh blokov v SAPR dlya mikroshem gluboko submikronnyh proektnyh norm / V.K. Zol'nikov, S.A. Evdokimova, T.V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 16-24. - DOI:https://doi.org/10.12737/article_5d639c80c83b71.60273345.

19. Algoritmicheskaya osnova modelirovaniya i obespecheniya zaschity tipovyh KMOP elementov v processe proektirovaniya / V.K. Zol'nikov, V.A. Smerek, V.I. Anciferova, S.A. Evdokimova // Modelirovanie sistem i processov. - 2013. - № 3. - S. 14-16. - DOI:https://doi.org/10.12737/2382.

20. Raschet teplovyh i termomehanicheskih effektov dlya mikroshem i tranzistorov / V.K. Zol'nikov, M.V. Nazarenko, S.A. Evdokimova, V.I. Anciferova // Modelirovanie sistem i processov. - 2014. - № 3. - S. 12-14. - DOI:https://doi.org/10.12737/6640.

21. Shemotehnicheskiy bazis i proverka mikroshem na rabotosposobnost' / V.K. Zol'nikov, S.A. Evdokimova, A.V. Fomichev [i dr.] // Modelirovanie sistem i processov. - 2018. - T. 11, № 4. - S. 25-30. - DOI:https://doi.org/10.12737/article_5c79642c158bc0.44957273.

22. Sklyar, V.A. Modelirovanie nizkointensivnogo vozdeystviya kosmicheskogo prostranstva / V.A. Sklyar, V.K. Zol'nikov, S.A. Evdokimova // Modelirovanie sistem i processov. - 2016. - T. 9, № 2. - S. 71-74. - DOI:https://doi.org/10.12737/23663.

23. Rezul'taty ocenki nadezhnosti mikroshemy 1921VK028 / V.K. Zol'nikov, S.A. Evdokimova, E.V. Grosheva, A.I. Yan'kov // Modelirovanie sistem i processov. - 2019. - T. 12. - № 4. - S. 37-41. - DOI:https://doi.org/10.12737/2219-0767-2020-12-4-37-41.

24. Rezul'taty ocenki nadezhnosti mikroshemy 1921VK035 / V.K. Zol'nikov, S.A. Evdokimova, E.V. Grosheva, A.I. Yan'kov // Modelirovanie sistem i processov. - 2019. - T. 12, № 4. - S. 42-46. - DOI:https://doi.org/10.12737/2219-0767-2020-12-4-42-46.

25. Sistemy na kristalle (SNK) i vliyanie dannoy tehnologii na sozdanie sovremennoy EKB / V.K. Zol'nikov, S.A. Evdokimova, M.Yu. Arzamascev, A.E. Gridnev // Modelirovanie sistem i processov. - 2020. - T. 13, № 4. - S. 19-23. - DOI:https://doi.org/10.12737/2219-0767-2021-13-4-19-23.

26. Assessment of the impact of composite mixtures on the quality of new meat products / Y.A. Safonova, E.E. Kurchaeva, A.V. Lemeshkin [et al.] // IOP Conference Series: Earth and Environmental Science. - 2021. - Vol. 640(3). - P. 032002. - DOI:https://doi.org/10.1088/1755-1315/640/3/032002.

27. Software tools for assessing the environmental safety of city filling stations / O.V. Kuripta, Yu.A. Vorobieva, K.V. Garmonov [et al.] // IOP Conference Series: Earth and Environmental Science. International scientific and practical conference "Ensuring sustainable development in the context of agriculture, green energy, ecology and earth science". - 2021. - P. 042051. - DOI:https://doi.org/10.1088/1755-1315/723/4/042051.

28. Novikov, A.I. Grading of scots pine seeds by the seed coat color: how to optimize the engineering parameters of the mobile optoelectronic device / A.I. Novikov, V.K. Zolnikov, T.P. Novikova // Inventions. - 2021. - V. 6, № 1. - P. 7. - DOI:https://doi.org/10.3390/inventions6010007.

29. Methods of assessing the effectiveness of reforestation based on the theory of fuzzy sets / A. Kuzminov, L. Sakharova, M. Stryukov, V.K. Zolnikov // IOP Conference Series: Earth and Environmental Science. "International Forestry Forum "Forest Ecosystems as Global Resource of the Biosphere: Calls, Threats, Solutions". - 2020. - P. 012007. - DOI:https://doi.org/10.1088/1755-1315/595/1/012007.

30. Sakharova, L. Methodology for assessing the sustainability of agricultural production, taking into account its economic efficiency / L. Sakharova, M. Stryukov, V.K. Zolnikov // IOP Conference Series: Earth and Environmental Science. International scientific and practical conference "Forest ecosystems as global resource of the biosphere: calls, threats, solutions" (Forestry-2019). - 2019. - P. 012019. - DOI:https://doi.org/10.1088/1755-1315/392/1/012019.

31. Belokurov, V.P. Modeling passenger transportation processes using vehicles of various forms of ownership / V.P. Belokurov, S.V. Belokurov, V.K. Zolnikov // Transportation Research Procedia. - 2018. - P. 44-49. - DOI:https://doi.org/10.1016/j.trpro.2018.12.041.

32. Formation of the predicted training parameters in the form of a discrete information stream / T.E. Smolentseva, V.I. Sumin, V.K. Zolnikov, V.V. Lavlinsky // Journal of Physics: Conference Series. - 2018. - P. 012045. - DOI:https://doi.org/10.1088/1742-6596/973/1/012045.

33. Methods of multi-criteria optimization in problems of simulation of trucking industry / S.V. Belokurov, V.P. Belokurov, V.K. Zolnikov, O.N. Cherkasov // Transportation Research Procedia. 12th International Conference "Organization and Traffic Safety Management in Large Cities", SPbOTSIC 2016. - 2017. - Pp. 47-52. - DOI:https://doi.org/10.1016/j.trpro.2017.01.010.

34. Features of the design of statically indeterminate frames by the mixed method with rods of a given stiffness / S.A. Sazonova, A. V. Zvyagintseva, S.D. Nikolenko [et al.] // IOP Conference Series: Earth and Environmental Science. - 2021. - Vol. 848(1). - P. 012168. - DOI:https://doi.org/10.1088/1755-1315/848/1/012168.

35. Metody obespecheniya stoykosti elektronnoy komponentnoy bazy k odinochnym sobytiyam putem rezervirovaniya / A.E. Kozyukov, V.K. Zol'nikov, S.A. Evdokimova [i dr.] // Modelirovanie sistem i processov. - 2021. - T. 14, № 1. - S. 10-16. - DOI:https://doi.org/10.12737/2219-0767-2021-14-1-10-16.

JATS XML

Editor-in-Chief, editorial board chair

GOST

Muzhzhuhina E. A., Nikolenko S. D., Sazonova S. A. Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop // Modeling of systems and processes. 2022. no. 2. pp. 24-33. DOI: https://doi.org/10.12737/2219-0767-2022-15-2-24-33. (Date of access 14.10.2026).

MLA

Ekaterina A. Muzhzhuhina, Nikolenko S. D., Sazonova S. A.. "Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop." Modeling of systems and processes 15.2 (2022): 24-33. DOI: https://doi.org/10.12737/2219-0767-2022-15-2-24-33.

APA

Muzhzhuhina E. A., Nikolenko S. D., Sazonova S. A. (2022). Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop. Modeling of systems and processes, 15(2), 24-33. https://doi.org/10.12737/2219-0767-2022-15-2-24-33

Chicago

Ekaterina A. Muzhzhuhina, Nikolenko S. D., Sazonova S. A.. "Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop." Modeling of systems and processes 15, no. 2 (2022): 24-33. https://doi.org/10.12737/2219-0767-2022-15-2-24-33.

WIKI

{{cite journal | author = Muzhzhuhina E. A., Nikolenko S. D., Sazonova S. A. | title = Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop | journal = Modeling of systems and processes | year = 2022 | volume = 15 | issue = 2 | pages = 24-33 | doi = 10.12737/2219-0767-2022-15-2-24-33 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

MODELING OF THE STRESS STATE AND DETERMINATION OF THE STRENGTH CHARACTERISTICS OF MATERIALS OF SUPPORTING STRUCTURES OF AN INDUSTRIAL WORKSHOP Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop

Confirmation