Study of the environmental and economic parameters of the Mounty-4000 machine for primary wood transportation in the Republic of Bulgaria
Abstract and keywords
Abstract (English):
The article analyzes the operation of modern technology for the primary transportation of wood in mountainous areas, showing the prospect of using mobile rope installations based on trucks equipped with a remote-controlled carriage, as well as a manipulator with a processor head for processing trees or logs, sorting assortments and their loading onto timber transport. The purpose of the presented work was to conduct theoretical and experimental studies of the environmental and economic parameters of the operation of Mounty 4000 in the primary transportation of wood in mountainous areas. In the course of the theoretical studies, the operating cycle of the “mining processor” was structured and, as a result, a mathematical dependence of the costs of its operation was obtained. For each component of cycle time, during a production experiment in the mountainous conditions of Bulgaria, distribution laws and statistical characteristics of their durations were obtained. The hypothesis of normal distribution was confirmed by the Pearson test at a given significance level of p=0.05. During the simulation experiment, the dependence of the damageability of tree trunks left in the cutting area on the intensity of felling, the density of the planting and the distance of pulling the timber under the line of the supporting rope along the installation route was established. The level of significance of the main factors influencing the total costs (for felling intensity β/α= 0.67; apiary width β/α= 0.74; forest stock β/α= 0.84) and damage to trees (for felling intensity β/ α= 0.95; forest stock β/α= 1.0; apiary width β/α= 1.52). The values of favorable areas of the most significant influencing factors were determined when the level of damage to C2 trees is below the required standards - 12%. The results of the conducted research are recommended to be used at the design stage of logging operations for a comprehensive assessment of the functioning of equipment from economic and environmental positions. For this purpose, a computer program has been developed “Program for justifying the technology and system of logging machines” (certificate of state registration No. 2023662656).

Keywords:
timber harvesting, reforestation works, mountain forests, primary transportation of wood, mining processors, mobile rope installations, environmental damage, forestry result of logging, environmental-sparing technologies of logging operations, technical and economic efficiency of equipment functioning
Text
Text (PDF): Read Download
References

1. Abuzov A. V., Grigor'ev I. V., Abuzov Ya. A., Kalyashov V. A., Grigor'eva O. I. Metodika rascheta ekonomicheskoy effektivnosti ispol'zovaniya aerostaticheskih letatel'nyh apparatov na lesotransportnyh operaciyah. Resources and Technology. 2023; 20 (2): 55-70. URL: https://www.elibrary.ru/item.asp?id=54301934.

2. Abuzov A. V., Ryabuhin P. B. Ocenka effektivnosti ekspluatacii lesotransportnyh sistem na baze aerostatno-kanatnyh ustanovok. Sistemy. Metody. Tehnologii. 2019; 4 (44): 107-111. URL: https://www.elibrary.ru/item.asp?id=41483214.

3. Abuzov A. V., Ryabuhin P. B. Aerostaticheskie apparaty dlya lesozagotovok v trudnodostupnyh rayonah Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. 2022; 1(385): 110-127. URL: https://www.elibrary.ru/item.asp?id=47964187.

4. Abuzov A. V., Ryabuhin P. B. Tehnologii promezhutochnyh rubok na trudnodostupnyh territoriyah Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. 2021; 4(382): 117-130. URL: https://www.elibrary.ru/item.asp?id=46332902.

5. Buhtoyarov L. D., Abramov V. V., Prosuzhih A. A., Rudov S. E., Kunickaya O. A., Grigor'ev I. V. Analiz konstrukciy i tehnologiy raboty forvarderov na lesozagotovkah. Resources and Technology. 2020; 17 (3): 1-35. URL: https://www.elibrary.ru/item.asp?id=44258123.

6. Grafova E. O., Syunev V. S., Gorbach V. V. Analiz faktorov negativnogo vozdeystviya lesozagotovitel'nogo proizvodstva na prirodnuyu sredu Severo-zapadnogo regiona RF. Lesotehnicheskiy zhurnal. 2023; 2 (50): 5-24. URL: https://www.elibrary.ru/item.asp?id=54525077.

7. Grigor'ev I. V., Dmitriev A. S., Kalyashov V. A., Dolzhikov I. S., Krivosheev A. A., Shvecov A. S., Grigor'eva O. I. Sravnitel'nyy analiz vozdeystviya na pochvogrunty lesnyh mashin s razlichnymi dvizhitelyami na sklonah. Sistemy. Metody. Tehnologii. 2024; 1 (61): 122-129. URL: https://www.elibrary.ru/item.asp?id=61559935

8. Zaikin A. N., Sivakov V. V., Sheveleva E. V. Metody snizheniya povrezhdaemosti stvolov derev'ev pri vyborochnyh i sanitarnyh rubkah lesa Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. 2019; 4:200-211. URL: https://www.elibrary.ru/item.asp?id=38538966.

9. Zaikin A. N., Sivakov V. V., Zelikov V. A., Stasyuk V. V., Chuykov A. S., Zelikova N. V. Programmnoe obespechenie dlya upravleniya lesohozyaystvennym i lesozagotovitel'nym processami: ocenka primenimosti. Lesotehnicheskiy zhurnal. 2022; 1 (45): 96-109. URL: https://www.elibrary.ru/item.asp?id=54525086.

10. Kalyashov V. A., Do Tuan A., Hitrov E. G., Grigor'eva O. I., Gur'ev A. Yu., Novgorodov D. V. Covremennye sistemy mashin i tehnologii zagotovki drevesiny i lesovosstanovleniya v usloviyah gornyh lesosek. Resources and Technology. 2022; 19(2): 1-47. URL: https://www.elibrary.ru/item.asp?id=49330872.

11. Rudov S. E., Kunickaya O. A., Grigor'ev I. V., Grigor'eva O. I., Kalyashov V. A., Nguen T. N. Covremennye sistemy mashin dlya osvoeniya lesosek na sklonah. Remont. Vosstanovlenie. Modernizaciya. 2021; 1: 35-42. URL: https://www.elibrary.ru/item.asp?id=44560047.

12. Rudov S. E., Shapiro V. Ya., Grigor'ev I. V., Kunickaya O. A., Grigor'eva O. I. Modelirovanie vzaimodeystviya lesnyh mashin s pochvogruntom pri rabote na sklonah. Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. 2021; 6(384): 121-134. URL: https://www.elibrary.ru/item.asp?id=47312342.

13. Ryabuhin P. B. Lesozagotovki i ekologiya lesnoy sredy. Sistemy. Metody. Tehnologii. 2019; 3(43): 96-99. URL: https://www.elibrary.ru/item.asp?edn=yirtjj.

14. Ryabuhin P. B. Ekonomiko-matematicheskoe modelirovanie ocenki effektivnosti deyatel'nosti predpriyatiy lesopromyshlennogo kompleksa. Sistemy. Metody. Tehnologii. 2020; 4(48): 139-144. URL: https://www.elibrary.ru/item.asp?edn=uplhaw.

15. Ryabuhin P. B., Kunickaya O. A., Grigor'eva O. I. Obosnovanie tehnologicheskih processov i sistem mashin dlya lesosechnyh rabot. Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. 2023; 2(392): 88-105. URL: https://www.elibrary.ru/item.asp?id=50793225.

16. Svidetel'stvo o gosudarstvennoy registracii programmy dlya EVM № 2023662656. Programma dlya obosnovaniya tehnologii i sistemy mashin dlya lesozagotovok / A.S. Chernyh, A.I. Maksimenkov, L.D. Buhtoyarov, D.N. Afonichev, V.V. Abramov, E.V. Pozdnyakov, Polukarov D.A. (RF). – Pravoobladatel': FGBOU VO Voronezhskiy gosudarstvennyy lesotehnicheskiy universitet imeni G.F. Morozova (RU). – № 2023661918, zayavleno 09.06.2023; zaregistrirovano 09.06.2023. Rezhim dostupa: https://www.elibrary.ru/item.asp?edn=hvxwsm.

17. Sivakov V. V., Zaikin A. N., Novikova T. P., Zelikov V. A., Stasyuk V. V., Chuykov A. S. Cifrovizaciya sistemy organizacii rabochih processov lesozagotovitel'nyh mashin: ocenka effektivnosti na primere "ponsse", "komatsu" i "john deere". Lesotehnicheskiy zhurnal. 2023; 3 (51): 200-218. URL: https://www.elibrary.ru/item.asp?id=56967063.

18. Syunev V. S., Grafova E. O. Novye tehnicheskie resheniya po snizheniyu negativnogo vozdeystviya lesopromyshlennyh proizvodstv na lesnuyu sredu. Resources and Technology. 2022; 19 (1): 48-71. URL: https://www.elibrary.ru/item.asp?id=48334315.

19. Troyanov I. N., Abramov V. V., Buhtoyarov L. D., Afonichev D. N., Chernyh A. S., Maksimenkov A. I. Issledovanie tehnologicheskih variantov vypolneniya obrabatyvayuschih operaciy lesosechnyh rabot benzopilami. Lesotehnicheskiy zhurnal. 2019; 3 (35): 114-130. URL: https://www.elibrary.ru/item.asp?edn=ysitvg.

20. Capecchi I., Neri F., Borghini T., Bernetti I. (2023). Use of virtual reality technology in chainsaw operations, education and training. Forestry: An International Journal of Forest Research. DOI:https://doi.org/10.1093/forestry/cpad007.

21. Cavalli R. Steep terrain forest operations – challenges, technology development, current implementation, and future opportunities. International Journal of Forest Engineering. 2019; 30(3): 175. DOI:https://doi.org/10.1080/14942119.2019.1603030.

22. Erber G. Timber extraction by cable yarding on flat and wet terrain: a survey of cable yarder manufacturer’s experience. Silva Fennica. 2020;54(2):10211. DOI: https://doi.org/10.14214/sf.10211.

23. Francisca B. Safety in steep slope logging operations. Journal of Agromedicine. 2019; 24(2): 138. DOI: https://doi.org/10.1080/1059924X.2019.1581115.

24. Glushkov S. R., Boyadzhiev D. I., Popikov P. I., Chetverikova I. V., Abramov V. V., Polukarov D. A. Study of the operation of the Mounty 4000 machine in logging in mountainous conditions in Bulgaria. IOP Conf. Series: Earth and Environmental Science 2021;875:012037. DOI:https://doi.org/10.1088/1755-1315/875/1/012037.

25. Herajarv H. Science as a decision-support tool in forest policies. Silva Fennica. 2021; 55(2): 10566. DOI: https://doi.org/10.14214/sf.10566 2021.

26. Räty J., Hauglin M., Astrup R. Breidenbach J. (2022). Assessing and mitigating systematic errors in forest attribute maps utilizing harvester and airborne laser scanning data. Canadian Journal of Forest Research. DOI:https://doi.org/10.1139/cjfr-2022-0053.

27. Rukomoynikov K. P., Sergeeva T. V., Gilyazova T. A., Tsarev E. M., Anisimov P. N. (2023). Modeling operation of forest harvester in AnyLogic simulation system. Forestry Bulletin. 27. 69-80. DOI:https://doi.org/10.18698/2542-1468-2023-3-69-80.

28. Shegelman I. R. The analysis of the research areas in Russian timber industry using the knowledge base on the scientific publications of Russian researchers. Journal of Advanced Research in Dynamical andControl Systems. 2020; 12: 175. DOI:https://doi.org/10.5373/JARDCS/V12SP2/SP20201043.

29. Sokolov, S. V. Determining the Initial Orientation for Navigation and Measurement Systems of Mobile Apparatus in Reforestation / S. V. Sokolov, A. I. Novikov, V. Ivetić // Inventions. – 2019. – Vol. 4, No. 4. – P. 56. – DOI https://doi.org/10.3390/inventions4040056.


Login or Create
* Forgot password?