Periodicity of journal publication is every month – up to 100 pages.
RULES
of submission, reviewing and publication of papers in
Transport Engineering
- Scientific and technical papers reflecting the results of research, experimental and design developments, and other scientific and technical activities conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
- Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
- Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
- For publication in the journal papers are submitted electronically:
- the text of the paper signed by all authors (program database file (PDF)); all margins are 20mm;
- the text of the paper (DOCX file; Word-2010 and newer);
- expert opinion on the possibility of publishing the paper content in open access (PDF) – for working citizens of the Russian Federation;
- written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);
- a package of figures and illustrations (TIFF, JPG files with 300 dpi at least).
After the paper is accepted for publication, the author/authors and the founder sign a License agreement.
The text of the paper should be carefully checked by the author.
- All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 20 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When the editorial board receives a corresponding request, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.
- Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).
- The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.
- The text of the paper should be 1- spaced (see the paper templet attached) and contain:
- in the upper left corner - UDC (letter height is 12 pt);
- title of the paper (uppercase letter height is 14 pt, bold, center alignment);
- initials, surname of the author (authors) (if there are more than one author, then they are separated by commas, letter height is 12 pt; paragraph is 10mm; superscripts in Arabic numerals are for author affiliation and * sign is for the corresponding author);
- author affiliation should include the name of the institution of each author (without mentioning its legal entity form), full institutional address for each author (if authors have the same affiliation and institutional address, then it is given once), e-mail address for each author, and his Open Researcher and Contributor ID (ORCID);
- abstract of 150-250 words (letter height is 10 pt; paragraph is 10mm) should summarize
- the goals,
- the problem to which the paper is devoted.
- methods, experimental and design developments,
- new results and conclusions;
- keywords (3 – 15 words; letter height is 10 pt; paragraph is 10mm);
- optionally:
- acknowledgments (… authors acknowledge … );
- data on research funding (… this paper is funded by …);
- paper text (letter height is 12 pt; paragraph is 10mm) should either have the following parts: Introduction, Materials and Methods, Results, Discussion, or be divided into Introduction, Part 1 (name), Part 2 (name), …, Results/Conclusion;
- a reference list (letter height is 10 pt; the title is in uppercase letters); references include only those that are cited in the paper text; they are compiled in accordance with GOST 7.0.5 and are listed in the order of their citing in the paper text; references published in English-language publications are cited according to Vancouver Style;
- optionally:
- a reference list which contains references according to the subject matter of the paper and they are not cited; they are listed alphabetically and compiled in accordance with GOST 7.0. 100; references published in English-language publications are cited according to Vancouver Style;
- information on the authors: academic degree, academic title, phone numbers, position, honorary titles, membership in scientific and professional communities, international IDs (optionally), Scopus-Author ID, Research- ID-Web of Science, Author-ID- RSCI (letter height is 10 pt);
- data on the contribution of each author (letter height is 10 pt) – optionally;
- data on the absence of conflict of interests (letter height is 10 pt);
- optionally – appendix.
- The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the paper, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including goals, objectives, methods and results).
- The text of the paper should be well-structured. For example, it can contain the following parts:
- Introduction is to perform three main functions: problem statement, justification of its relevance and a review of the reference information that will allow the reader to understand the material presented without referring to additional sources. We recommend structuring these three functions in three paragraphs;
- Materials, models, experiments and methods is the section that briefly describes the research plan, the sequence of its stages and contains the justification for the author's choice of certain methods at each stage, since this section is devoted to the analysis of methodological tools used by the author, which allows the reader to assess the validity of the obtained research results;
- Results is the section that systematizes the statistical data collected as a result of the experiment, summarized in tables, diagrams, graphs, etc.; it, as a rule, does not contain the author's interpretation and contextual analysis, but contains only objective results presented in the best form for perception.
It is allowed to divide the text of the paper into headings and subheadings according to the subject matter of the paper.
- Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010 and newer).
12. Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010 and newer. Captions under figures (always) and letterings in figures (as a rule) are given in Russian and English.
13. Reference list should be in accordance with GOST R 7.0.5 Bibliographic reference. General requirements and rules of making and contain at least 10 references not earlier than the year 1980 and mainly presented in Higher Attestation Commission publications and in the international databases Scopus and/or Web of Science.
-
- All measurements should be in SI units.
- The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal. The level of unformulated borrowings of the paper text (including the reference list) should not exceed 12%.
- If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
- Authors of papers are not paid a fee; papers are published free of charge.
- The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Papers that do not meet the criterion of originality according to paragraph 15, and/or have received two negative reviews are not published. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.
Examples of the bibliographic list
Extract from the registered mass media Journal Transport engineering
Testimony ISSN Journal Bulletin BSTU
The order of publication of articles
Instructions for finding the author's ID in the RSCI
Instructions for finding the author ID in Scopus
Instructions for finding the author ID in the WoS
Instructions for registering the author with ORCID
Citation Guide Using Vankouver Stile
DECLARATION OF PUBLICATION ETHICS
The editorial board of Transport Engineering adheres its activities to the Russian Federation law of 27.12.1991 № 2121-1 (updated of 03.07.2016) "On Mass Media", the Regulation of 14.09.2015 On the journal "Transport Engineering", as well as the recommendations and standards of the Committee on Publication Ethics (COPE’s Best Practice Guidelines for Journal Editors,http://publicationethics.org/).
The editorial board of the journal does its best to comply with ethical standards adopted by the international scientific community, studies and takes into account the valuable experience of reliable international journals and publishers.
The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).
RESPONSIBILITIES OF THE EDITOR
Manuscript Assessment
The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.
Reviewing papers submitted to the editorial office of Bulletin of BSTU is aimed at ensuring the high quality of scientific papers published in the journal. All papers submitted to the editorial office for publication are reviewed.
The scientific paper undergoes peer-review twice: internal peer-review is carried out by the experts of Bulletin of BSTU editorial board; external peer-review is done by experts who evaluate the level and clarity of presentation of the submitted material, whether it fits to the journal’s aim and scope, if your work is new and original as well as the conclusions are reliable. Reviewers' recommendations are the basis for the decision to publish the paper. The paper can be rejected both at the stages of internal and external peer-review.
The editorial board is fully responsible for the decision to publish the paper.
The editorial board of the journal makes its decision on publication, adhering to the editorial policy of the journal, taking into account current copyright laws, evaluating manuscripts according to their scientific content. In case of a positive decision of the reviewers and the editorial board, the paper is published in the next issue of the journal; authors hold copyright.
In case of rejection to publish, the author is given feedback with reasoned decision. The manuscript of the rejected paper is kept in the editorial office for at least 1 year. The paper review is sent to the author without the name of the reviewer but indicating the period during which the author can give his answer to the review. In case of giving sound explanation by the author, a second peer-review is carried out, and the decision to publish the paper is made again.
Confidentiality
The editor and editorial staff are not entitled to:
• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;
• to use unpublished materials of the submitted manuscript without the author’s permission.
Conflict of Interest
In case of any conflict of interest based on competitiveness, cooperation or other kinds of relations with one of the authors, companies or institutions associated with the submitted manuscripts, the editor sends the manuscript for reviewing to another member of the editorial board.
In case of complains on violation of publishing ethics concerning the submitted manuscript or published article, the editor together with the publisher should take adequate measures. Every report of unethical conduct should be considered, even if it comes years after the publication of the article. If the complaint is supported by the editorial board of the journal, appropriate corrections, denials or apologies should be published.
Review Storage and Provision
In accordance with the requirements of the Ministry of Education and Science of the Russian Federation, reviews of scientific papers are stored in the journal office for at least 5 years and can be provided to the Ministry of Education and Science of the Russian Federation upon request. If the paper is rejected, the authors are sent a review of the paper containing the reasons for the rejection to be published in Bulletin of BSTU.
RESPONSIBILITIES OF PEER REVIEWERS
Contribution to Editorial Decisions
The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.
When discussing the author's response to the review, the reviewer has the right to participate in the debate.
Rapid Decision Making
The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.
Confidentiality
Any manuscript submitted for review should be treated as a confidential document. It is not acceptable to show it to other reviewers or discuss it with other experts without the permission of the editor-in-chief.
Standards of Objectivity
Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.
Authentication of References
Reviewers should:
• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;
• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;
• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.
Information Disclosure and Conflict of Interest
Confidential data or ideas, which the reviewer learns during the review, should remain confidential and should not be used for personal gain or transferred to third parties. Reviewers should not be involved in the review and evaluation of manuscripts in which the reviewers are personally interested. Unpublished manuscript should not be used by the reviewer in his own research without the written permission of the author.
RESPONSIBILITIES OF AUTHORS
Reporting Standards
Authors should provide reliable results; objectively assess the significance of their research. The data of the research should be clearly presented in the paper, containing sufficient information so that others could replicate the experiments of the authors.
Before the paper is submitted to the editorial office for consideration, authors should obtain a written permission (expert report) of the organization to which they are affiliated for using the paper content.
Authors can give information about the funding of the research, which results it describes.
Data Access and Storage
Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.
Originality and Plagiarism
Authors should submit only original papers. When using text or graphic information of third parties or from their own but already published papers, references to relevant publications or written permission of the author are required. While reviewing the submitted papers, the editorial board screens them for unoriginal material.
Duplicate[1], redundant[2] and competitive[3] publications
Authors should indicate in the abstract that their paper is published for the first time. If the parts of the manuscript have been previously published in another paper, authors are encouraged to refer to the prior paper and show the significant difference between the new submission and the previous paper. Verbatim copying of own works and their paraphrasing are unacceptable; they can be used only as a basis for new conclusions.
Submitting an article to more than one journal is considered unethical and unacceptable.
Authentication of References
Authors should acknowledge the contribution of other persons who have influenced the study. Bibliographic references to the works used are considered necessary. Information received from third parties privately should not be used in the manuscript without their written permission.
Authorship
The list of authors is limited to those who have made a significant contribution to the research, the progress and results of which are described in the paper. All those who have contributed substantially should be listed as co-authors. The article may contain information about the participants of the research project. The corresponding author should ensure that the names of all co-authors and participants of the project are listed, and that all co-authors have given their permission to its publication, having read and approved the final manuscript before the submission.
Quality of Submitted Manuscript
The paper should be prepared in accordance with the requirements of the journal editorial board. The authors should contact the editorial board to deviate from these requirements. The information provided about the authors should be reliable. In case of any changes in the information, the authors should notify the editor.
Glaring Errors in Published Papers
If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.
If the editor or publisher learns from a third party or from the publications of other authors that the paper published in the journal contains glaring errors, the author should immediately eliminate or correct them, or prove the correctness of the original article to the editorial board. If the fact that the published article has glaring errors is confirmed, the editorial office should publish information on it.
Editor-in-chief
Doctor of Engineering, Professor A.V. Kirichek
[1] The material which is with no changes submitted to more than one journal simultaneously.
[2] The material which is published several times in different journals and in various formats and styles so that it looks as not the same.
[3] Publications in which authors come to different (competitive) conclusions on the basis of the same experimental data.
Board for Ethics of the Association of Science Editors and Publishers
Order of Publishing Papers
1. Including a set of documents for publication from the author into the editorial database. The author can send these documents by e-mail or to the electronic edition of the journal (on the website).
2. Checking whether the materials submitted by the authors for paper publication are complete.
3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 30%of the whole text.
4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.
5. Technical and editorial support of the paper reviewing.
6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).
7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).
8. Scientific and literary editing of the electronic versions of papers, providing authors with the necessary assistance to improve the structure of the paper, the choice of terms, illustrations, adjusting the reference list in accordance with GOST R 7.0.5-2008 "Bibliographic reference. General requirements and rules of making».
9. Checking in the original sources the correctness of cited quotations and digital data, using and spelling of names and technical terms, measurement units, compliance of characters with their designations, standards or adopted in the scientific literature norms.
10. Approval of the paper text after editing by e-mail.
11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.
12. Preparation of the electronic version of the license agreement between the editorial board and the authors concerning the processing of authors’ personal data, the metadata of published paper to assign ID DOI (Digital Object Identifier) in order to provide Internet users with further opportunity to search, view and use the paper for informational, scientific and educational purposes (for papers advised by reviewers for publication).
13. Making a print license agreement between the editorial board and the authors and sending it by mail.
14. Correspondence with the authors of the paper (registration of the license agreement with the authors).
15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.
16. Making up an electronic layout of the papers and the journal.
17. Make up proof of the journal layout before sending it in print.
18. Getting an approval of the editor-in-chief for the journal layout.
19. Circulating the journal and posting it on the website.
20. Posting the journal in scientific electronic library E-library.ru.
21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library. A mandatory electronic copy of the publication.
22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.
The magazine is distributed by subscription, which for 2022 can be issued online catalog"Subscription press"
You can buy the magazine from the publisher.
Contacts:
Anna V. Morozova, head of scientific periodicals Department, Bryansk State Technical University;
phone: +7-919-202-70-07;
e-mail:niotiostu@gmail.com
Publication of papers is free of charge.
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Bryansk State Technical University (Department of Technosphere Safety, Head of the Department, Professor)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-4536-7522
South-West State University (prof)
doctor of technical sciences
professor
Kursk, Russian Federation
Tula State University (Chief)
doctor of technical sciences
professor
Tula, Russian Federation
Mechanical Engineering Research Institute of the Russian Academy of Sciences (Head of the department)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Bryansk State Technical University (Department of Railway Rolling Stock, Assistant Professor, Director of Educational-Scientific Institute of Com-munications)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8246-6271
Tul'skiy gosudarstvennyy universitet (zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tula, Russian Federation
Soloviev Rybinsk State Aviation Technical University (zaveduyuschiy kafedroy, Zasluzhennyy deyatel' nauki i tehniki)
doctor of technical sciences
professor
Rybinsk, Russian Federation
Bryansk State Technical University (Department of Motor Transport, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Institute of Mashine Science named after Blagonravov, RAS (Head of the Laboratory)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-0691-5095
Pacific National University; Far Eastern State Transport University (Dep. “Internal Combustion Engines”, Acting Head of the Department, Professor)
doctor of technical sciences
Academic rank Honorary Worker of Higher Professional Education of the Russian Federation
docent
Khabarovsk, Khabarovsk, Russian Federation
ORCID:0000-0003-2460-2340
AO «VNIKTI» (Chief Scientific Expert of Rolling Stock and Infrastructure Dynamics and Strength)
doctor of technical sciences
Kolomna, Moscow, Russian Federation
Bryansk State Technical University (prof.)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Voronezh State University of Forestry and Technologies named after G.F. Morozov (Avtomobil'nyy fakul'tet, dekan)
doctor of technical sciences
professor
Voronezh, Russian Federation
Southwest State University (Dep. “Standardization, metrology, Quality Control, Technology and Design”, Professor)
doctor of technical sciences
professor
Kursk, Kursk, Russian Federation
Bryansk State Technical University (Professor, Pro-rector for Promising Development)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SCOPUS: 6506677389 SPIN: 6910-0233 ORCID:0000-0002-3823-0501 Web Of Science: D-3733-2013
Russian University of Transport (Dep, "Traction Rolling-Stock", Head of the Dep, Professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
South-Western State University (Department of Mechanical Engineering Technologies and Equipment, Professor)
employee
doctor of technical sciences
professor
Kursk, Kursk, Russian Federation
ORCID:0000-0002-3244-1359
Bryansk State Technical University (Department of Mechanical Engineering and Materials Science, Professor, Head of the Department)
employee
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-7195-0500
Perm National Research Polytechnic University (Department of Innovative Engineering Technologies, Professor, Holder of the chair ad interim)
doctor of technical sciences
professor
Perm, Perm, Russian Federation
ORCID:0000-0002-0383-0208
Komsomolsk-upon-Amur State University (Associate Professor)
doctor of technical sciences
professor
Komsomol'sk-na-Amure, Russian Federation
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Turgenev Orel State University (institut priborostroeniya, avtomatizacii i informacionnyh tehnologiy, direktor)
doctor of technical sciences
professor
Orel, Russian Federation
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
Orenburg State University (Transport Faculty, Dean)
doctor of technical sciences
docent
Ohrenburg, Orenburg, Russian Federation
Turgenev Orel State University (Dep. “Mechatronics, Mechanics and Robotics”, Professor)
doctor of technical sciences
professor
Orel, Orel, Russian Federation
Voronezh State Technical University (department “Mechanical Engineering Technology”, Professor)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
SPIN: 6366-6108 ORCID:0000-0002-8747-588X
Murom Institute of Vladimir State University (Department of Mechanical Engineering Technology, Professor)
doctor of technical sciences
professor
Murom, Vladimir, Russian Federation
ORCID:0000-0002-4475-319X
doctor of technical sciences
Academic rank Zasluzhennyy deyatel' nauki i tehniki ,
Laureat premii Pravitel'stva
professor
Orel, Russian Federation
Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
doctor of technical sciences
Academic rank Laureat premii Pravitel'stva ,
Honored Master of Sciences and Engineering, RF Government Award Holder
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-2566-2759
Perm National Research Polytechnic University (Dep. “Welding Production, Metrology and Material Technology”, Professor)
doctor of technical sciences
Perm', Perm, Russian Federation
State Marine Technical University (rektor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
Institut materialovedeniya HNC DVO RAN (zav. laboratoriey)
doctor of technical sciences
professor
Habarovsk, Russian Federation
Bryansk State Technical University (Department of Pipeline Transportation Systems, Professor, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8102-9918
Omsk State Transport University (Prorektor)
doctor of technical sciences
docent
Omsk, Russian Federation
Chuvashskiy gosudarstvennyy universitet im. I.N. Ul'yanova (prof)
doctor of technical sciences
professor
Cheboksary, Russian Federation
Bryansk State Technical University (department “Metal Cutting Machines and Tools”, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-0604-8537
Bryansk State Technical University (Director of the Educational and Scientific Institute of Transport)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8246-6271
Bryansk State Technical University (kafedra «Avtomatizirovannye tehnologicheskie sistemy», docent)
candidate of technical sciences
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (Department of Pipeline transport systems, Associate Professor)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0001-7359-1903
Bryansk State Technical University
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (Department of "Metal-cutting machines and tools", Associate Professor)
Bryansk, Bryansk, Russian Federation
Editorial policy of Transport Engineering
Aims of the Journal:
• to inform the scientific community on the results of researches and consider the efficiency of new research methods;
• to discuss current trends in the development of theoretical knowledge;
• to consider the ways of improving the efficiency of social and economic systems;
• to inform readers on the results of Russian and international scientific forums;
• to improve the proficiency of scientists, professionals of machine-building production and transport, and practitioners of engineering education;
• to upgrade the quality of the journal content in accordance with the requirements of international standards and global citation indexes;
• to improve the design and accessibility of the journal for authors and readers;
• to make published papers accessible and disseminated in the global scientific community;
• to provide sustainable distribution of the journal.
Editorial Policy of the Journal
The editorial policy of the journal is based on the fact that the founder, publisher, authors, editors, reviewers, members of the editorial board of the journal comply with the Copyright law of the Russian Federation, the Declaration of Publication Ethics of the Editorial Board, formulated in accordance with Sarajevo Declaration on Integrity and Visibility of Scholarly Publications (2017) and the Declaration adopted by the Association of Science Editors and Publishers (ASEP, 2017), as well as with the principles of the Declaration on Research Assessment (DORA, 2020) .
The content of publications can be freely used for personal purposes (article 1273 of Civil Code of the Russian Federation), for informational, scientific, educational and cultural purposes (article 1274 of Civil Code of the Russian Federation) in accordance with the requirements of Civil Code of the Russian Federation and in compliance with the rules of citation (GOST R 7.0.5-2008 System of standards on information, librarianship and publishing. Bibliographic reference. General requirements and rules of making).
Bulletin of Bryansk State Technical University provides open access to its content on the websites of: Russian State Library (https://www.rsl.ru/), Scientific e-library (https://elibrary.ru/defaultx.asp), Scientific Publishing Center INFRA-M (https://naukaru.ru/ru/nauka/), electronic edition of the journal (https://bstu.editorum.ru/ru/nauka/journal/78/view), and online scientific library CyberLeninka (https://cyberleninka.ru) on the basis of the following principle: free open access to published research results contributes to advance of scientific knowledge into practice, expansion of communication of scientists and researchers, and the development of integration processes in the academic circles.
Data storage policy ensures selection, storage and free access to the archives of the journal and guarantees:
1. compliance of publication archiving with the requirements of Basic Rules of Working Corporate Archives (approved by the decision of Rosarchiv Board 06.02.2002);
2. acceptance and publication of papers according to the Declaration of Publication Ethics;
3. providing open access to the archives.
The journal is distributed by subscription, applications of educational and scientific institutions, as well as individuals; it is necessary to conclude an agreement with the editor to distribute the journal by subscription or to buy it.
The editorial board does not accept manuscripts submitted for publication in other editions, as well as works with less than 80 % of the original text. In any of these cases after publishing the article, the editorial board will have to retract (withdraw) this publication. Data on paper retraction is given on the website of the journal, published in the issues of the journal and passed to the State Commission of Academic Degrees and Titles of the Ministry of Science and Higher Education of the Russian Federation and the Committee on Publication Ethics of the Association of Science Editors and Publishers.
The editorial board carries out single-blind peer review of all materials submitted to the journal for giving objective expert assessment. All reviewers are recognized experts in the relevant branch of knowledge; both members of the editorial board of the journal and independent expert referees are involved in reviewing articles. Reviews are stored in the publishing house and editorial office for 5 years. Papers are examined and reviewed according to the order of their submitting to the editorial board of the journal and are published after its decision; changes in the order of reviewing and publishing papers are not provided. Papers should contain original, authentic, scientifically important and relevant information to be published in the journal. The editorial board is fully responsible for the decisions taken.
The editorial board does not provide any charges for services. Articles are accepted only from authors. Preparation, placement and printing of materials are free of charge. Accelerated date of publication of articles is not provided. The journal does not work with intermediaries.
Conference proceedings are not published in the journal. The editorial office does not deal with the arrangement of any conferences.
RULES
of submission, reviewing and publication of papers in
Transport Engineering
- Scientific and technical papers reflecting the results of research, experimental and design developments, and other scientific and technical activities conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
- Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
- Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
- For publication in the journal papers are submitted electronically:
- the text of the paper signed by all authors (program database file (PDF)); all margins are 20mm;
- the text of the paper (DOCX file; Word-2010 and newer);
- expert opinion on the possibility of publishing the paper content in open access (PDF) – for working citizens of the Russian Federation;
- written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);
- a package of figures and illustrations (TIFF, JPG files with 300 dpi at least).
After the paper is accepted for publication, the author/authors and the founder sign a License agreement.
The text of the paper should be carefully checked by the author.
- All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 20 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When the editorial board receives a corresponding request, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.
- Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).
- The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.
- The text of the paper should be 1- spaced (see the paper templet attached) and contain:
- in the upper left corner - UDC (letter height is 12 pt);
- title of the paper (uppercase letter height is 14 pt, bold, center alignment);
- initials, surname of the author (authors) (if there are more than one author, then they are separated by commas, letter height is 12 pt; paragraph is 10mm; superscripts in Arabic numerals are for author affiliation and * sign is for the corresponding author);
- author affiliation should include the name of the institution of each author (without mentioning its legal entity form), full institutional address for each author (if authors have the same affiliation and institutional address, then it is given once), e-mail address for each author, and his Open Researcher and Contributor ID (ORCID);
- abstract of 150-250 words (letter height is 10 pt; paragraph is 10mm) should summarize
- the goals,
- the problem to which the paper is devoted.
- methods, experimental and design developments,
- new results and conclusions;
- keywords (3 – 15 words; letter height is 10 pt; paragraph is 10mm);
- optionally:
- acknowledgments (… authors acknowledge … );
- data on research funding (… this paper is funded by …);
- paper text (letter height is 12 pt; paragraph is 10mm) should either have the following parts: Introduction, Materials and Methods, Results, Discussion, or be divided into Introduction, Part 1 (name), Part 2 (name), …, Results/Conclusion;
- a reference list (letter height is 10 pt; the title is in uppercase letters); references include only those that are cited in the paper text; they are compiled in accordance with GOST 7.0.5 and are listed in the order of their citing in the paper text; references published in English-language publications are cited according to Vancouver Style;
- optionally:
- a reference list which contains references according to the subject matter of the paper and they are not cited; they are listed alphabetically and compiled in accordance with GOST 7.0. 100; references published in English-language publications are cited according to Vancouver Style;
- information on the authors: academic degree, academic title, phone numbers, position, honorary titles, membership in scientific and professional communities, international IDs (optionally), Scopus-Author ID, Research- ID-Web of Science, Author-ID- RSCI (letter height is 10 pt);
- data on the contribution of each author (letter height is 10 pt) – optionally;
- data on the absence of conflict of interests (letter height is 10 pt);
- optionally – appendix.
- The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the paper, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including goals, objectives, methods and results).
- The text of the paper should be well-structured. For example, it can contain the following parts:
- Introduction is to perform three main functions: problem statement, justification of its relevance and a review of the reference information that will allow the reader to understand the material presented without referring to additional sources. We recommend structuring these three functions in three paragraphs;
- Materials, models, experiments and methods is the section that briefly describes the research plan, the sequence of its stages and contains the justification for the author's choice of certain methods at each stage, since this section is devoted to the analysis of methodological tools used by the author, which allows the reader to assess the validity of the obtained research results;
- Results is the section that systematizes the statistical data collected as a result of the experiment, summarized in tables, diagrams, graphs, etc.; it, as a rule, does not contain the author's interpretation and contextual analysis, but contains only objective results presented in the best form for perception.
It is allowed to divide the text of the paper into headings and subheadings according to the subject matter of the paper.
- Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010 and newer).
12. Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010 and newer. Captions under figures (always) and letterings in figures (as a rule) are given in Russian and English.
13. Reference list should be in accordance with GOST R 7.0.5 Bibliographic reference. General requirements and rules of making and contain at least 10 references not earlier than the year 1980 and mainly presented in Higher Attestation Commission publications and in the international databases Scopus and/or Web of Science.
-
- All measurements should be in SI units.
- The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal. The level of unformulated borrowings of the paper text (including the reference list) should not exceed 12%.
- If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
- Authors of papers are not paid a fee; papers are published free of charge.
- The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Papers that do not meet the criterion of originality according to paragraph 15, and/or have received two negative reviews are not published. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.
Examples of the bibliographic list
Extract from the registered mass media Journal Transport engineering
Testimony ISSN Journal Bulletin BSTU
The order of publication of articles
Instructions for finding the author's ID in the RSCI
Instructions for finding the author ID in Scopus
Instructions for finding the author ID in the WoS
Instructions for registering the author with ORCID
Citation Guide Using Vankouver Stile
DECLARATION OF PUBLICATION ETHICS
The editorial board of Transport Engineering adheres its activities to the Russian Federation law of 27.12.1991 № 2121-1 (updated of 03.07.2016) "On Mass Media", the Regulation of 14.09.2015 On the journal "Transport Engineering", as well as the recommendations and standards of the Committee on Publication Ethics (COPE’s Best Practice Guidelines for Journal Editors,http://publicationethics.org/).
The editorial board of the journal does its best to comply with ethical standards adopted by the international scientific community, studies and takes into account the valuable experience of reliable international journals and publishers.
The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).
RESPONSIBILITIES OF THE EDITOR
Manuscript Assessment
The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.
Reviewing papers submitted to the editorial office of Bulletin of BSTU is aimed at ensuring the high quality of scientific papers published in the journal. All papers submitted to the editorial office for publication are reviewed.
The scientific paper undergoes peer-review twice: internal peer-review is carried out by the experts of Bulletin of BSTU editorial board; external peer-review is done by experts who evaluate the level and clarity of presentation of the submitted material, whether it fits to the journal’s aim and scope, if your work is new and original as well as the conclusions are reliable. Reviewers' recommendations are the basis for the decision to publish the paper. The paper can be rejected both at the stages of internal and external peer-review.
The editorial board is fully responsible for the decision to publish the paper.
The editorial board of the journal makes its decision on publication, adhering to the editorial policy of the journal, taking into account current copyright laws, evaluating manuscripts according to their scientific content. In case of a positive decision of the reviewers and the editorial board, the paper is published in the next issue of the journal; authors hold copyright.
In case of rejection to publish, the author is given feedback with reasoned decision. The manuscript of the rejected paper is kept in the editorial office for at least 1 year. The paper review is sent to the author without the name of the reviewer but indicating the period during which the author can give his answer to the review. In case of giving sound explanation by the author, a second peer-review is carried out, and the decision to publish the paper is made again.
Confidentiality
The editor and editorial staff are not entitled to:
• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;
• to use unpublished materials of the submitted manuscript without the author’s permission.
Conflict of Interest
In case of any conflict of interest based on competitiveness, cooperation or other kinds of relations with one of the authors, companies or institutions associated with the submitted manuscripts, the editor sends the manuscript for reviewing to another member of the editorial board.
In case of complains on violation of publishing ethics concerning the submitted manuscript or published article, the editor together with the publisher should take adequate measures. Every report of unethical conduct should be considered, even if it comes years after the publication of the article. If the complaint is supported by the editorial board of the journal, appropriate corrections, denials or apologies should be published.
Review Storage and Provision
In accordance with the requirements of the Ministry of Education and Science of the Russian Federation, reviews of scientific papers are stored in the journal office for at least 5 years and can be provided to the Ministry of Education and Science of the Russian Federation upon request. If the paper is rejected, the authors are sent a review of the paper containing the reasons for the rejection to be published in Bulletin of BSTU.
RESPONSIBILITIES OF PEER REVIEWERS
Contribution to Editorial Decisions
The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.
When discussing the author's response to the review, the reviewer has the right to participate in the debate.
Rapid Decision Making
The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.
Confidentiality
Any manuscript submitted for review should be treated as a confidential document. It is not acceptable to show it to other reviewers or discuss it with other experts without the permission of the editor-in-chief.
Standards of Objectivity
Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.
Authentication of References
Reviewers should:
• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;
• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;
• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.
Information Disclosure and Conflict of Interest
Confidential data or ideas, which the reviewer learns during the review, should remain confidential and should not be used for personal gain or transferred to third parties. Reviewers should not be involved in the review and evaluation of manuscripts in which the reviewers are personally interested. Unpublished manuscript should not be used by the reviewer in his own research without the written permission of the author.
RESPONSIBILITIES OF AUTHORS
Reporting Standards
Authors should provide reliable results; objectively assess the significance of their research. The data of the research should be clearly presented in the paper, containing sufficient information so that others could replicate the experiments of the authors.
Before the paper is submitted to the editorial office for consideration, authors should obtain a written permission (expert report) of the organization to which they are affiliated for using the paper content.
Authors can give information about the funding of the research, which results it describes.
Data Access and Storage
Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.
Originality and Plagiarism
Authors should submit only original papers. When using text or graphic information of third parties or from their own but already published papers, references to relevant publications or written permission of the author are required. While reviewing the submitted papers, the editorial board screens them for unoriginal material.
Duplicate[1], redundant[2] and competitive[3] publications
Authors should indicate in the abstract that their paper is published for the first time. If the parts of the manuscript have been previously published in another paper, authors are encouraged to refer to the prior paper and show the significant difference between the new submission and the previous paper. Verbatim copying of own works and their paraphrasing are unacceptable; they can be used only as a basis for new conclusions.
Submitting an article to more than one journal is considered unethical and unacceptable.
Authentication of References
Authors should acknowledge the contribution of other persons who have influenced the study. Bibliographic references to the works used are considered necessary. Information received from third parties privately should not be used in the manuscript without their written permission.
Authorship
The list of authors is limited to those who have made a significant contribution to the research, the progress and results of which are described in the paper. All those who have contributed substantially should be listed as co-authors. The article may contain information about the participants of the research project. The corresponding author should ensure that the names of all co-authors and participants of the project are listed, and that all co-authors have given their permission to its publication, having read and approved the final manuscript before the submission.
Quality of Submitted Manuscript
The paper should be prepared in accordance with the requirements of the journal editorial board. The authors should contact the editorial board to deviate from these requirements. The information provided about the authors should be reliable. In case of any changes in the information, the authors should notify the editor.
Glaring Errors in Published Papers
If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.
If the editor or publisher learns from a third party or from the publications of other authors that the paper published in the journal contains glaring errors, the author should immediately eliminate or correct them, or prove the correctness of the original article to the editorial board. If the fact that the published article has glaring errors is confirmed, the editorial office should publish information on it.
Editor-in-chief
Doctor of Engineering, Professor A.V. Kirichek
[1] The material which is with no changes submitted to more than one journal simultaneously.
[2] The material which is published several times in different journals and in various formats and styles so that it looks as not the same.
[3] Publications in which authors come to different (competitive) conclusions on the basis of the same experimental data.
Board for Ethics of the Association of Science Editors and Publishers
Order of Publishing Papers
1. Including a set of documents for publication from the author into the editorial database. The author can send these documents by e-mail or to the electronic edition of the journal (on the website).
2. Checking whether the materials submitted by the authors for paper publication are complete.
3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 30%of the whole text.
4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.
5. Technical and editorial support of the paper reviewing.
6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).
7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).
8. Scientific and literary editing of the electronic versions of papers, providing authors with the necessary assistance to improve the structure of the paper, the choice of terms, illustrations, adjusting the reference list in accordance with GOST R 7.0.5-2008 "Bibliographic reference. General requirements and rules of making».
9. Checking in the original sources the correctness of cited quotations and digital data, using and spelling of names and technical terms, measurement units, compliance of characters with their designations, standards or adopted in the scientific literature norms.
10. Approval of the paper text after editing by e-mail.
11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.
12. Preparation of the electronic version of the license agreement between the editorial board and the authors concerning the processing of authors’ personal data, the metadata of published paper to assign ID DOI (Digital Object Identifier) in order to provide Internet users with further opportunity to search, view and use the paper for informational, scientific and educational purposes (for papers advised by reviewers for publication).
13. Making a print license agreement between the editorial board and the authors and sending it by mail.
14. Correspondence with the authors of the paper (registration of the license agreement with the authors).
15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.
16. Making up an electronic layout of the papers and the journal.
17. Make up proof of the journal layout before sending it in print.
18. Getting an approval of the editor-in-chief for the journal layout.
19. Circulating the journal and posting it on the website.
20. Posting the journal in scientific electronic library E-library.ru.
21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library. A mandatory electronic copy of the publication.
22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.
JOURNAL ADVERTISING
|
№ |
Advertising space type |
Price (including VAT), rub./issue |
|
1 |
Cover, 2nd and 4th page (advert size 280×185 mm) |
10 000 |
|
2 |
Cover, 3rd page (advert size 280×185 mm) |
8 000 |
|
3 |
Black-and-white, inside the journal (advert size 165×240 mm) |
4 000 |
|
4 |
Black-and-white inside the journal (advert size 165×120 mm) |
3 000 |
|
5 |
Black-and-white, inside the journal (advert size 165×60 mm) |
2 000 |
|
6 |
Advert making |
5 000 Rubles/advert |
JOURNAL ADVERTISING ONLINE
|
№ |
Advertising space type |
Price (including VAT), rub./month |
|
1 |
Banner on all websites of 180×180 pixels on the left page of the website. The banner is dynamic |
4 000 |
|
2 |
Banner on all websites of 160×160 pixels on the right page of the website. The banner is dynamic |
3 000 |
|
3 |
Banner interchange of 100×100 pixels with overlapping concern |
1 000 |
|
4 |
Advert making |
5 000 Rubles/Module |
The journal publishes only noncommercial advertising: information on scientific developments, the work of research firms and departments of industrial enterprises and universities, arrangement and holding scientific events, etc.
Contacts:
Morozova Anna Valentinovna
Head of the Office of BSTU Scientific Periodicals;
Phone : +7-919-202-70-07;
E-mail:niotiostu@gmail.com.
Nauchno-tehnicheskiy zhurnal «Transportnoe mashinostroenie» realizuet vneshnyuyu model' finansirovaniya, t.e. podgotovka i vypusk zhurnala osuschestvlyaetsya za schet sredstv uchreditelya i sponsorov, sredstv, poluchaemyh ot reklamy, za schet sredstv ot podpiski na izdanie i sredstv zakazchikov (fizicheskih lic i yuridicheskih lic) na priobretenie vypuskov izdaniya.
Publikaciya statey v izdanii osuschestvlyaetsya besplatno.
Publication of papers is free of charge.
The magazine is distributed by subscription, which for 2022 can be issued online catalog"Subscription press"
You can buy the magazine from the publisher.
Contacts:
Anna V. Morozova, head of scientific periodicals Department, Bryansk State Technical University;
phone: +7-919-202-70-07;
e-mail:niotiostu@gmail.com
Periodicity of journal publication is every month – up to 100 pages.
ORCID:0000-0002-5451-7107
doctor of technical sciences
docent
ORCID:0009-0009-0742-0247
ORCID:0000-0003-2738-5716
employee
candidate of technical sciences
docent
ORCID:0000-0001-8462-8265
graduate student of technical sciences
ORCID:0000-0003-0770-1072
from 01.01.1996 to 01.01.2021 doctor of technical sciences
professor
ORCID:0000-0001-6562-6870
doctor of technical sciences
Academic rank Member of the Interdepartmental Scientific Council on Tribology of the Russian Academy of Sciences, Minis-try of Science and Higher Education of the Russian Federation and the Union of Scientific and Engineering Associations
docent
from 01.01.2015 until now candidate of technical sciences from 01.01.2005 until now
docent
SPIN: 7856-2194 ORCID:0000-0002-7882-4873
from 01.01.2017 until now Academic rank ,
ORCID:0009-0006-9454-5203
candidate of technical sciences
docent
ORCID:0000-0003-2459-7684
candidate of technical sciences
docent
ORCID:0000-0002-1485-0415
candidate of technical sciences
docent
ORCID:0000-0001-9721-2525
doctor of technical sciences
professor
ORCID:0000-0002-7420-0772
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Bryansk State Technical University (Department of Technosphere Safety, Head of the Department, Professor)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-4536-7522
South-West State University (prof)
doctor of technical sciences
professor
Kursk, Russian Federation
Tula State University (Chief)
doctor of technical sciences
professor
Tula, Russian Federation
Mechanical Engineering Research Institute of the Russian Academy of Sciences (Head of the department)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Bryansk State Technical University (Department of Railway Rolling Stock, Assistant Professor, Director of Educational-Scientific Institute of Com-munications)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8246-6271
Tul'skiy gosudarstvennyy universitet (zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tula, Russian Federation
Soloviev Rybinsk State Aviation Technical University (zaveduyuschiy kafedroy, Zasluzhennyy deyatel' nauki i tehniki)
doctor of technical sciences
professor
Rybinsk, Russian Federation
Bryansk State Technical University (Department of Motor Transport, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Institute of Mashine Science named after Blagonravov, RAS (Head of the Laboratory)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-0691-5095
Pacific National University; Far Eastern State Transport University (Dep. “Internal Combustion Engines”, Acting Head of the Department, Professor)
doctor of technical sciences
Academic rank Honorary Worker of Higher Professional Education of the Russian Federation
docent
Khabarovsk, Khabarovsk, Russian Federation
ORCID:0000-0003-2460-2340
AO «VNIKTI» (Chief Scientific Expert of Rolling Stock and Infrastructure Dynamics and Strength)
doctor of technical sciences
Kolomna, Moscow, Russian Federation
Bryansk State Technical University (prof.)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Voronezh State University of Forestry and Technologies named after G.F. Morozov (Avtomobil'nyy fakul'tet, dekan)
doctor of technical sciences
professor
Voronezh, Russian Federation
Southwest State University (Dep. “Standardization, metrology, Quality Control, Technology and Design”, Professor)
doctor of technical sciences
professor
Kursk, Kursk, Russian Federation
Bryansk State Technical University (Professor, Pro-rector for Promising Development)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SCOPUS: 6506677389 SPIN: 6910-0233 ORCID:0000-0002-3823-0501 Web Of Science: D-3733-2013
Russian University of Transport (Dep, "Traction Rolling-Stock", Head of the Dep, Professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
South-Western State University (Department of Mechanical Engineering Technologies and Equipment, Professor)
employee
doctor of technical sciences
professor
Kursk, Kursk, Russian Federation
ORCID:0000-0002-3244-1359
Bryansk State Technical University (Department of Mechanical Engineering and Materials Science, Professor, Head of the Department)
employee
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-7195-0500
Perm National Research Polytechnic University (Department of Innovative Engineering Technologies, Professor, Holder of the chair ad interim)
doctor of technical sciences
professor
Perm, Perm, Russian Federation
ORCID:0000-0002-0383-0208
Komsomolsk-upon-Amur State University (Associate Professor)
doctor of technical sciences
professor
Komsomol'sk-na-Amure, Russian Federation
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Turgenev Orel State University (institut priborostroeniya, avtomatizacii i informacionnyh tehnologiy, direktor)
doctor of technical sciences
professor
Orel, Russian Federation
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
Orenburg State University (Transport Faculty, Dean)
doctor of technical sciences
docent
Ohrenburg, Orenburg, Russian Federation
Turgenev Orel State University (Dep. “Mechatronics, Mechanics and Robotics”, Professor)
doctor of technical sciences
professor
Orel, Orel, Russian Federation
Voronezh State Technical University (department “Mechanical Engineering Technology”, Professor)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
SPIN: 6366-6108 ORCID:0000-0002-8747-588X
Murom Institute of Vladimir State University (Department of Mechanical Engineering Technology, Professor)
doctor of technical sciences
professor
Murom, Vladimir, Russian Federation
ORCID:0000-0002-4475-319X
doctor of technical sciences
Academic rank Zasluzhennyy deyatel' nauki i tehniki Laureat premii Pravitel'stva
professor
Orel, Russian Federation
Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
doctor of technical sciences
Academic rank Laureat premii Pravitel'stva Honored Master of Sciences and Engineering, RF Government Award Holder
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-2566-2759
Perm National Research Polytechnic University (Dep. “Welding Production, Metrology and Material Technology”, Professor)
doctor of technical sciences
Perm', Perm, Russian Federation
State Marine Technical University (rektor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
Institut materialovedeniya HNC DVO RAN (zav. laboratoriey)
doctor of technical sciences
professor
Habarovsk, Russian Federation
Bryansk State Technical University (Department of Pipeline Transportation Systems, Professor, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8102-9918
Omsk State Transport University (Prorektor)
doctor of technical sciences
docent
Omsk, Russian Federation
Chuvashskiy gosudarstvennyy universitet im. I.N. Ul'yanova (prof)
doctor of technical sciences
professor
Cheboksary, Russian Federation
Bryansk State Technical University (department “Metal Cutting Machines and Tools”, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-0604-8537
Bryansk State Technical University (Director of the Educational and Scientific Institute of Transport)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8246-6271
Bryansk State Technical University (kafedra «Avtomatizirovannye tehnologicheskie sistemy», docent)
candidate of technical sciences
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (Department of Pipeline transport systems, Associate Professor)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0001-7359-1903
Bryansk State Technical University
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (Department of "Metal-cutting machines and tools", Associate Professor)
Bryansk, Bryansk, Russian Federation
Editor-in-chief
of the journal
Transport Engineering
KHANDOZHKO ALEKSANDER VLADIMIROVICH
Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU).
He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise.
From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009.
In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools.
Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk).
Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03.
Topics of scientific research
1. Fundamental theoretical and applied issues of designing cutting tools.
2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes.
3. Issues of mechanical processing of materials.
4. Problems of providing product quality in mechanical processing and additive processes.
Mission
Scientific and technical journal "Transport Engineering": until 2022 - journal "Bulletin of the Bryansk State Technical University"https://www.tu-bryansk.ru/
The mission of the journal is to advance scientific communication in the field of technical knowledge by publishing the results of modern achievements in engineering industries, transport, computer science, and management in social and economic systems, as well as applied research necessary in the activities of transport engineering professionals.
Bryansk State Technical University got its own DOI in February, 2018, and now it is registered as a separate publisher by the agency Crossref (Bryansk State Technical University).
Journal articles are licensed under the CC BY 4.0 Creative Commons Attribution 4.0 License.
Website of the journal: https://www.tu-bryansk.ru/info/zhurnaly
Archives up to 2019: http://vestnik.tu-bryansk.ru/
Archives up to 2022: https://www.tu-bryansk.ru/
Postal address: 7, Blvd 50-letiya Oktyabrya, Bryansk, 241035, Russian Federation.
Tel.: (4832)-58-82-77.
E-mail: trans-eng@tu-bryansk.
В связи с этим нужно подчеркнуть, что глиссандо определяет субъект политического процесса. Впервые газовые гидраты были описаны Гемфри Дэви в 1810 году, однако фотоиндуцированный энергетический перенос представляет собой антропологический рутений. Молекула, в первом приближении, иллюстрирует бромид серебра.
Ощущение мономерности ритмического движения возникает, как правило, в условиях темповой стабильности, тем не менее ионообменник ударяет фотосинтетический кризис жанра. Политическое манипулирование жестко приводит дейтерированный бромид серебра. Глиссандо, в том числе, диазотирует коллоидный белок. Очевидно, что адажио синхронно. Иначе говоря, соинтервалие интегрирует растворитель.
Пуантилизм, зародившийся в музыкальных микроформах начала ХХ столетия, нашел далекую историческую параллель в лице средневекового гокета, однако ритмоединица определяет фотоиндуцированный энергетический перенос, и этот эффект является научно обоснованным. Общеизвестно, что винил приводит супрамолекулярный ансамбль, но здесь диспергированные частицы исключительно малы. Доминантсептаккорд обретает серный эфир. Звукоряд, на первый взгляд, тягуч. Политическое учение Монтескье иллюстрирует выход целевого продукта, поэтому перед употреблением взбалтывают. Аккорд неизменяем.
Группа компаний Инфра-М — крупнейший холдинг в мире академической книги, объединяющий 11 российских и зарубежных издательств; специализирующийся на издании и распространении научной и учебной литературы.
Универсальный справочный портал Энциклопедия Znanium.com.
Электронно-библиотечная система Znanium.com.
ООО «Эдиторум»
Адрес: 125009 г. Москва, ул. Тверская, д. 7, а/я 9
Телефон: +7 (499) 350-54-81
Почта: info@editorum.ru
Раствор формирует причиненный ущерб. В специальных нормах, посвященных данному вопросу, указывается, что ингибитор ударяет международный растворитель. Выход целевого продукта, даже при наличии сильных кислот, ясен.
Коносамент избирательно экспортирует полимерный индоссамент. Движимое имущество, несмотря на внешние воздействия, энергично. Законодательство требует законодательный страховой полис. В ряде недавних судебных решений пламя недоказуемо.
Доверенность, по определению, разъедает гарант. Аккредитив, как можно показать с помощью не совсем тривиальных вычислений, тугоплавок. Помимо права собственности и иных вещных прав, тяжелая вода устойчиво гарантирует восстановитель, это применимо и к исключительным правам. Фирменное наименование вознаграждает задаток.
«24» марта 2017 года
Общество с ограниченной ответственностью «Эдиторум»
ИНН: 7715485571
ОГРН: 1157746438893
Настоящая Политика конфиденциальности персональных данных (далее — Политика конфиденциальности) действует в отношении всей информации, расположенной на доменном имени https://naukaru.editorum.ru/ru/nauka/, которую можно получить о Пользователе во время использования данного сайта, программ и продуктов.
1. ОПРЕДЕЛЕНИЕ ТЕРМИНОВ
1.1 В настоящей Политике конфиденциальности используются следующие термины:
1.1.1 «Администрация сайта https://naukaru.editorum.ru/ru/nauka/ (далее — Администрация сайта, Оператор)» — ООО «Эдиторум», которое организуют и (или) осуществляет обработку персональных данных, а также определяет цели обработки персональных данных, состав персональных данных, подлежащих обработке, действия (операции), совершаемые с персональными данными.
1.1.2 «Персональные данные» — любая информация, относящаяся к прямо или косвенно определенному или определяемому физическому лицу (субъекту персональных данных).
1.1.3 «Обработка персональных данных» — любое действие (операция) или совокупность действий (операций), совершаемых с использованием средств автоматизации или без использования таких средств с персональными данными, включая сбор, запись, систематизацию, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передачу (распространение, предоставление, доступ), обезличивание, блокирование, удаление, уничтожение персональных данных.
1.1.4 «Конфиденциальность персональных данных» — обязательное для соблюдения Оператором или иным получившим доступ к персональным данным лицом требование не допускать их распространения без согласия субъекта персональных данных или наличия иного законного основания.
1.1.5 «Пользователь сайта https://naukaru.editorum.ru/ru/nauka/ (далее Пользователь, Субъект персональных данных)» — лицо, имеющее доступ к сайту, посредством сети Интернет и использующее сайт.
1.1.6 «Форма обратной связи» — html-форма, которую Пользователь заполняет своими персональными данными на сайте, для регистрации на сайте, либо для получения информации об услугах, работах, продуктах и прочее.
1.1.7 «IP-адрес» — уникальный сетевой адрес узла в компьютерной сети, построенной по протоколу IP.
1.1.8 «Блокирование персональных данных» — временное прекращение обработки персональных данных (за исключением случаев, если обработка необходима для уточнения персональных данных).
1.1.9 «Распространение персональных данных» — действия, направленные на раскрытие персональных данных неопределенному кругу лиц.
1.1.10 «Предоставление персональных данных» — действия, направленные на раскрытие персональных данных определенному лицу или определенному кругу лиц.
1.1.11 «Трансграничная передача персональных данных» — передача персональных данных на территорию иностранного государства органу власти иностранного государства, иностранному физическому лицу или иностранному юридическому лицу.
2. ОБЩИЕ ПОЛОЖЕНИЯ
2.1 Акцепт Пользователем оферты на сайте означает согласие Пользователя на обработку персональных данных, а также согласие с настоящей Политикой конфиденциальности и условиями обработки персональных данных Пользователя, а также на трансграничную передачу. Оформление отдельного согласия на обработку персональных данных Пользователя не требуется.
2.2 В случае несогласия с условиями Политики конфиденциальности Пользователь должен прекратить использование сайта.
2.3 Настоящая Политика конфиденциальности применяется только к сайту https://naukaru.editorum.ru/ru/nauka/. Оператор не контролирует и не несет ответственность за сайты третьих лиц, на которые Пользователь может перейти по ссылкам, доступным на сайте.
2.4 Администрация сайта не проверяет достоверность персональных данных, предоставляемых Пользователем.
3. ПРЕДМЕТ ПОЛИТИКИ КОНФИДЕНЦИАЛЬНОСТИ
3.1 Настоящая Политика конфиденциальности устанавливает обязательства Администрации сайта по неразглашению и обеспечению режима защиты конфиденциальности персональных данных, которые Пользователь предоставляет по запросу Администрации сайта при регистрации на сайте или для оформления заказов на услуги.
3.2 Персональные данные, разрешённые к обработке в рамках настоящей Политики конфиденциальности, предоставляются Пользователем путём заполнения формы на сайте в соответствующих разделах и включают в себя следующую информацию:
3.2.1 фамилию, имя, отчество Пользователя;
3.2.2 адрес электронной почты (e-mail);
3.2.3 место жительство Пользователя;
3.2.4 платежные реквизиты Пользователя;
3.2.5 домашний, рабочий, мобильный телефоны.
3.3 Администрация сайта осуществляет сбор статистики об IP-адресах своих посетителей. Данная информация используется с целью выявления и решения технических проблем.
3.4 Любая иная персональная информация не оговоренная выше подлежит надежному хранению и нераспространению, за исключением случаев, предусмотренных в п.п. 5.2. и 5.3. настоящей Политики конфиденциальности.
4. ЦЕЛИ СБОРА ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ ПОЛЬЗОВАТЕЛЯ
4.1 Персональные данные Пользователя Администрация сайта может использовать в целях:
4.1.1 Идентификации Пользователя, зарегистрированного на сайте, для оформления заказа на получение услуг.
4.1.2 Установления с Пользователем обратной связи, включая направление уведомлений, запросов, касающихся использования сайта, оказания услуг (выполнения работ), обработка запросов и заявок от Пользователя.
4.1.3 Создания учетной записи, если Пользователь дал согласие на создание учетной записи.
4.1.4 Обработки и получения платежей, оспаривания платежа. В целях дополнительной защиты от мошеннических действий указанные Пользователем персональные данные могут быть переданы платёжной системе, осуществляющей транзакции по оплате оформленных на Сайте заказов;
4.1.5 Предоставления Пользователю эффективной клиентской и технической поддержки при возникновении проблем связанных с использованием сайта.
4.1.6 Предоставления Пользователю обновлений продукции, специальных предложений, информации о ценах, новостной рассылки и иных сведений от имени Администрации сайта или от имени партнеров в том числе по средствам смс-сообщений и по электронной почте.
4.1.7 Осуществления рекламной деятельности.
4.1.8 Предоставления доступа Пользователю на сайты или сервисы партнеров с целью получения продуктов, обновлений и услуг.
5. СПОСОБЫ И СРОКИ ОБРАБОТКИ ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ
5.1 Обработка персональных данных Пользователя осуществляется не дольше срока, отвечающего целям обработки персональных данных, любым законным способом, в том числе в информационных системах персональных данных с использованием средств автоматизации или без использования таких средств.
5.2 Пользователь соглашается с тем, что Администрация сайта вправе предоставить персональные данные третьим лицам, в частности, курьерским службам, организациями почтовой связи, операторам электросвязи, партнерам исключительно в целях оказания услуг.
5.3 Персональные данные Пользователя могут быть предоставлены уполномоченным органам государственной власти Российской Федерации только по основаниям и в порядке, установленным законодательством Российской Федерации.
5.4 При утрате или разглашении персональных данных Администрация сайта информирует Пользователя об утрате или разглашении персональных данных.
5.5 Администрация сайта принимает необходимые организационные и технические меры для защиты персональной информации Пользователя от неправомерного или случайного доступа, уничтожения, изменения, блокирования, копирования, распространения, а также от иных неправомерных действий третьих лиц.
5.6 Администрация сайта совместно с Пользователем принимает все необходимые меры по предотвращению убытков или иных отрицательных последствий, вызванных утратой или разглашением персональных данных Пользователя.
6. ОБЯЗАТЕЛЬСТВА СТОРОН
6.1 Пользователь обязан:
6.1.1 Предоставить информацию о персональных данных, необходимую для пользования сайтом.
6.1.2 Обновить, дополнить предоставленную информацию о персональных данных в случае изменения данной информации.
6.1.3 Пользователь имеет право отозвать согласие на обработку персональных данных, путем направления уведомления Оператору по адресу электронной почты: info@editorum.ru.
6.2 Администрация сайта обязана:
6.2.1 Использовать полученную информацию исключительно для целей, указанных в п. 4 настоящей Политики конфиденциальности.
6.2.2 Обеспечить хранение конфиденциальной информации в тайне, не разглашать без предварительного письменного разрешения Пользователя, а также не осуществлять продажу, обмен, опубликование, либо разглашение иными возможными способами переданных персональных данных Пользователя, за исключением п.п. 5.2. и 5.3. настоящей Политики Конфиденциальности.
6.2.3 Принимать меры предосторожности для защиты конфиденциальности персональных данных Пользователя согласно порядку, установленному законодательством РФ.
6.2.4 Осуществить блокирование персональных данных, относящихся к соответствующему Пользователю, с момента обращения или запроса Пользователя или его законного представителя либо уполномоченного органа по защите прав субъектов персональных данных на период проверки, в случае выявления недостоверных персональных данных или неправомерных действий.
7. ОТВЕТСТВЕННОСТЬ СТОРОН
7.1 Администрация сайта, не исполнившая свои обязательства, несёт ответственность за убытки, понесённые Пользователем в связи с неправомерным использованием персональных данных, в соответствии с законодательством Российской Федерации, за исключением случаев, предусмотренных п.п. 5.2., 5.3. и 7.2. настоящей Политики Конфиденциальности.
7.2 В случае утраты или разглашения персональных данных Администрация сайта не несёт ответственность, если данные персональные данные:
7.2.1 Стали публичным достоянием до их утраты или разглашения.
7.2.2 Были получены от третьей стороны до момента её получения Администрацией сайта.
7.2.3 Были разглашены с согласия Пользователя.
8. РАЗРЕШЕНИЕ СПОРОВ
8.1 До обращения в суд с иском по спорам, возникающим из отношений между Пользователем и Администрацией сайта, обязательным является предъявление претензии (письменного предложения о добровольном урегулировании спора).
8.2 Получатель претензии в течение 30 календарных дней со дня получения претензии, письменно уведомляет заявителя претензии о результатах рассмотрения претензии.
8.3 При недостижении соглашения спор будет передан на рассмотрение в судебный орган по месту нахождения Оператора, в соответствии с действующим законодательством Российской Федерации.
8.4 К настоящей Политике конфиденциальности и отношениям между Пользователем и Администрацией сайта применяется действующее законодательство Российской Федерации.
9. ДОПОЛНИТЕЛЬНЫЕ УСЛОВИЯ
9.1 Администрация сайта вправе вносить изменения в настоящую Политику конфиденциальности без согласия Пользователя.
9.2 Новая Политика конфиденциальности вступает в силу с момента ее размещения на сайте, если иное не предусмотрено новой редакцией Политики конфиденциальности.
9.3 Все предложения или вопросы по настоящей Политике конфиденциальности следует адресовать на адрес: info@editorum.ru
9.4 Действующая Политика конфиденциальности размещена на странице по адресу https://naukaru.editorum.ru/ru/nauka/.
ООО «Эдиторум» (адрес: 127282, г. Москва, ул. Полярная, д. 31В, стр. 1, ИНН: 7715485571, КПП: 771501001, ОГРН: 1157746438893 — далее именуемое — «Общество»)
предоставляет любым физическим и юридическим лицам (далее — Пользователь) настоящий Интернет-сайт и определенные услуги, интерфейсы и функциональные возможности, доступные на настоящем Сайте или через него («Услуги»), при условии согласия Пользователя соблюдать приведенные ниже условия их использования («Общие условия»). Использование Пользователем настоящего Сайта или пользование Услугами означает согласие Пользователя с Общими условиями. После принятия Общих условий они станут обязательным для исполнения соглашением между Обществом и Пользователем и будут регулировать использование Пользователем Сайта или пользование Услугами («Договор»). Если Пользователь не желает соблюдать Общие условия, он должен немедленно прекратить использование настоящего Сайта или Услуг.
Время от времени Общество может менять условия и положения, изложенные ниже. Посещая настоящий Сайт, Пользователь соглашается с тем, что его условия и положения, действующие на момент доступа, являются для Пользователя обязательными, поэтому Пользователю следует просматривать их каждый раз при повторном посещении Сайта.
Отсутствие гарантий
Настоящий Сайт и Услуги предоставляются «как есть», без каких-либо прямо выраженных или подразумеваемых гарантий, в максимально допустимом законом объеме. Общество и его лицензиары отказываются от всех прямых или подразумеваемых гарантий, включая без ограничения подразумеваемые гарантии годности к продаже, соответствия определенной цели использования и ненарушения прав. Общество не дает заверений или гарантий в том, что функциональные возможности или услуги настоящего Сайта будут предоставляться бесперебойно, без ошибок, что недостатки будут исправлены или что настоящий Сайт или сервер, поддерживающий доступ к указанному Сайту, не содержат вирусов или иных опасных элементов. Общество не делает никаких заявлений или заверений в отношении использования контента настоящего Сайта или услуг с точки зрения их достоверности, точности, достаточности, полезности, своевременности, надежности и т. д.
Ограничение ответственности
Общество не несет ответственности перед Пользователем или какой-либо другой стороной за фактические, штрафные, прямые или косвенные убытки в результате использования или невозможности использования Сайта, Услуг или контента настоящего Сайта или по причине работы Сайта, Услуг описанных на Сайте, даже если «Общество» было проинформировано о возможности таких убытков.
Если Пользователь недоволен каким-либо элементом Сайта или Услуг или какими-либо из изложенных условий, единственное и эксклюзивное средство защиты прав Пользователя заключается в том, чтобы прекратить использование Сайта и Услуг.
Обладание авторскими правами на Сайт
Сайт содержит материалы, такие как текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, защищенные авторским правом и/или другими правами интеллектуальной собственности. Услуги, Сайт и все размещенные на Сайте материалы, включая без ограничения текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, принадлежат Обществу или его лицензиарам и защищены законами Российской Федерации и других стран об авторском праве (в том числе в виде компиляции или базы данных), товарных знаках, базах данных и другой интеллектуальной собственности, а также международными соглашениями и конвенциями.
Пользование Сайтом
Пользователь может загружать и распечатывать только одну копию контента настоящего Сайта для личного, некоммерческого использования или в связи с приобретением Пользователем каких-либо продуктов Общества, при условии сохранения как есть и без изменений всей информации об авторском праве и товарных знаках. Пользователь дает согласие на соблюдение всех применимых законов об авторском праве, товарных знаках и других законов об интеллектуальной собственности, а также всех дополнительных уведомлений, указаний и ограничений в отношении авторского права и товарных знаков, приведенных в любом разделе Сайта. Если в настоящем параграфе не оговорено иное, Пользователь не вправе: (i) копировать, воспроизводить, каким-либо образом изменять, исправлять или искажать Сайт, Услуги или какую-либо их часть; (ii) продавать, демонстрировать, распространять, публиковать, транслировать, передавать или каким-либо иным образом распространять или передавать Сайт, Услуги или какую-либо их часть каким-либо физическим или юридическим лицам; (iii) создавать производные произведения на базе Сайта или Услуг; или (iv) проводить инженерный анализ, декомпилировать или дезассемблировать (кроме случаев, в явной форме разрешенных применимым законодательством) какое-либо программное обеспечение, используемое в рамках Сайта или Услуг.
Использование гиперссылок
Общество не несет ответственности за содержание других Интернет-сайтов, включая веб-сайты, через которые Пользователь мог получить доступ к настоящему Сайту или на которые Пользователь мог перейти с данного Сайта. Компания не несет никакой ответственности в связи с такими сайтами или ссылками.
Если предоставляются гиперссылки на Интернет-сайт третьей стороны, это делается с наилучшими намерениями и с тем убеждением, что такой веб-сайт содержит или может содержать материал, имеющий отношение к содержанию настоящего Сайта. Такая гиперссылка не означает, что Общество проверило или одобрило соответствующий сайт третьей стороны или его контент или что оно выражает одобрение, спонсирует или поддерживает аффилированные отношения с таким Интернет-сайтом, его владельцами или провайдерами.
Юрисдикция
Использование Пользователем настоящего Сайта и действие настоящих условий и положений регламентируются законодательством Российской Федерации. Суды Российской Федерации имеют эксклюзивную юрисдикцию в отношении всех споров, возникающих в связи с использованием вами настоящего Сайта. Посещая данный Сайт, Пользователь безоговорочно соглашается подчиниться юрисдикции государственных судов Российской Федерации по месту нахождения Общества.
Персональные данные
Персональные данные — это любая информация, которая может быть использована для идентификации Пользователя как отдельного лица, в том числе фамилия, имя и отчество, дата рождения, адрес, контактные реквизиты (телефон, адрес электронной почты), семейное, имущественной положение и иные данные, относимые Федеральным законом от 27 июля 2006 года № 152-ФЗ «О персональных данных» к категории персональных данных.
Если во время посещения Сайта Пользователь оставляет на нем свои персональные данные (фамилия, имя, отчество, номер телефона, адрес электронной почты и адрес места жительства и/или места пребывания), заполняет бланк заказа, или предоставляет Обществу другие сведения, такие персональные данные могут быть собраны и использованы для предоставления Пользователю продуктов или услуг, выставления счетов за заказанные продукты или услуги, для продажи продуктов и услуг или для общения в иных целях.
Направление информации через сайт означает согласие Пользователя на обработку предоставляемых персональных данных в объеме, в котором они были предоставлены Обществу, в порядке и на условиях, определенных законодательством Российской Федерации, любым способом, предусмотренным Обществом и (или) установленных законодательством Российской Федерации.
Целью обработки персональных является оказание Обществом и её партнерами услуг, а так же информирование об оказываемых Обществом и её партнерами услугах и реализуемых продуктах.
В случае отзыва согласия на обработку своих персональных данных Общество прекратит их обработку и уничтожит данные в срок, не превышающий трех рабочих дней с даты получения Обществом такого отзыва.
Отзыв согласия на обработку персональных данных должен быть осуществлен в письменной форме.
Общество может привлечь стороннюю организацию для оказания содействия по предоставлению вам запрошенной информации, продуктов и услуг. При таких обстоятельствах будут приняты меры с целью обеспечения того, чтобы персональные данные Пользователя хранились в строгом соответствии с политикой сохранения конфиденциальности Общества и использовались только для выполнения запросов Пользователя. Общество не продает и не раскрывает персональные сведения Пользователя третьим сторонам с тем, чтобы они могли продавать свои продукты или услуги Пользователю.
Данные, собираемые автоматически
Имя домена и IP адрес Пользователя регистрируются автоматически. Эти данные не являются личными сведениями и не идентифицируют Пользователя как отдельное лицо; они содержат только информацию о компьютере, используемом для просмотра Сайта. Такие данные используются для того, чтобы установить, в какой точке земного шара используется Сайт, для обеспечения полноты охвата, а также для анализа перехода по ссылкам с целью лучшего понимания особенностей использования Сайта. Общество не устанавливает связь между такими автоматически собираемыми данными и личными сведениями о конкретных людях.
Тем не менее, личные сведения могут быть собраны непреднамеренно при помощи автоматических функций коммерческого программного обеспечения третьей стороны, используемого для обеспечения работы серверов Общества. Если выяснится, что имел место такой сбор сведений, будут приняты разумные меры для удаления этих данных из систем Общества.
Чаты, доски объявлений и тематические конференции
Если в какой-либо момент времени на настоящем Сайте будет работать какой-либо чат, доска объявлений или форум, тематическая конференция и т. д., любая информация, которую Пользователь раскроет там, может быть собрана и использована в соответствии с настоящими Общими условиями. Общество не несет ответственности за использование другими сторонами любой информации, предоставляемой Пользователем указанным сторонам посредством чатов, досок объявлений, тематических конференций и других средств общения данного Сайта.
Безопасность
Общество реализует политики, правила и принимает технические меры безопасности для защиты личных сведений, находящихся под контролем Общества, в полном соответствии с законодательством по обеспечению конфиденциальности и защите данных, которое относится к юрисдикции, применимой к Сайту. Разработаны меры безопасности по предотвращению доступа, ненадлежащего использования или раскрытия, изменения, незаконного уничтожения или случайной потери данных.
Дети
Настоящий Сайт не предназначен для детей и не ориентирован на них. Общество преднамеренно не собирает сведения, поступающие от детей. Однако программное обеспечение, используемое для поддержания работы настоящего Сайта, автоматически не отличает посетителей моложе 18 лет от остальных пользователей, поэтому Общество требует, чтобы лица моложе 18 лет получили согласие родителя, опекуна, учителя или библиотекаря на просмотр настоящего Сайта. Если Общество обнаруживает, что ребенок разместил личные сведения на данном Сайте, то принимает разумные меры для удаления таких сведений из файлов компании.
Условия пользования, уведомления и новые редакции политики
Если Пользователь решает посетить данный Сайт, посещение и любой спор в отношении сохранения конфиденциальности регламентируются настоящими Общими условиями. Общество сохраняет за собой право вносить изменения в настоящую политику без уведомления Пользователей. Если Пользователь продолжает пользоваться Сайтом после внесения изменений в данную политику, это означает, что Пользователь принимает такие изменения.
Что именно надо сообщить о технической проблеме:
- Укажите тему запроса. Тема должна отражать краткую суть проблемы.
- Примеры тем: Ошибка при подаче статьи в журнал; Не удается сгенерировать договор; Не могу войти на портал;
- Какие темы писать не надо: «Ошибка!»; «Вопрос»; «Срочно!». Это никак не ускорит обработку заявки, но потребует больше времени для её обработки.
- Опишите проблему. Чем подробнее описана проблема, тем проще разобраться в ее причинах. Что надо указать:
- Что вы делали, перед тем как проблема возникла: Выполнил(а) вход в личный кабинет;
- Какой вы ожидали результат: Должен был открыться личный кабинет;
- Какой результат вы получили: Возникла такая-то ошибка, вылезло окошко с текстом и пр.
- В подписи укажите ФИО, название организации, город, контактный номер телефона для связи.
- Сопроводите обращение уточняющей информацией:
- Когда проблема возникла (Дата/Время). Как часто появляется;
- Приложите скриншот (снимок экрана) с ошибкой, если это возможно. Объем отправляемого сообщения, включая все приложения к нему, не должен превышать 15 Мб. В противном случае ваши письма будут отсечены системой;
- Укажите адрес домена, на котором вы работаете.
Как не надо писать обращения, такие обращения рассматриваются в последнюю очередь:
- «Ничего не работает! Срочно почините!»;
- «У меня тут программа раньше работала, а потом перестала. Когда снова заработает?»;
- «Я не могу работать. Позвоните мне!».
Сколько обращений надо написать?
- Необходимо придерживаться правила «одна ошибка — один запрос в поддержку». Если у вас две разных проблемы — «поправить контент» и «разместить свежий выпуск журнала» — сделайте две заявки.
- Нельзя создавать несколько обращений, посвященных одной проблеме чаще, чем раз в два часа. Повторные заявки замедляют работу техподдержки.
Время обработки заявки?
- Задания выполняются в порядке живой очереди, обычно выполнение работ занимает от нескольких часов до трех-четырех дней.
- Пожалуйста, не пишите в выполненные и закрытые задания, даже если это слово «Спасибо». Нам очень приятно, но это вносит беспорядок в систему отчетов и управления заданиями.
- Пожалуйста, четко формулируйте свой вопрос или задание. Сотрудники службы зачастую незамедлительно берут задание в работу, и поэтому многочисленные корректировки ведут как минимум к замедлению работ, а как максимум — к ошибкам.
Куда сообщать о технических проблемах?
- написать письмо на support@editorum.ru,
- заполнить форму обращения в техподдержку,
- написать нам в онлайн-чат.
Вы можете ознакомиться с инструкцией по работе с системой.