Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Submit manuscript
Home / Journals / Bulletin of Bryansk state technical university / Rubric Mechanical engineering

Articles of rubric " MECHANICAL ENGINEERING " of journal " BULLETIN OF BRYANSK STATE TECHNICAL UNIVERSITY "

HYBRID FINITE ELEMENT FOR SIMULATION OF STRESS STATE AT CRACK TOP IN 3D BODIES
MATHEMATICAL DESCRIPTION OF COMPLEX CUTTER CUTTING EDGE AND UNIVERSAL PROCEDURE FOR GEOMETRY COMPUTATION OF LAYER CUT
RELIABILITY INCREASE OF THREAD CUTTING IN SUPERSMALL HOLES
ROTARY TURNING REALIZATION UNDER PRODUCTION CONDITIONS
INVESTIGATION OF HEAT MODE AT GRINDING USING SOLID LUBRICANTS
CORROSION IMPACT UPON RESULT OF OPTIMUM DESIGN OF METAL WARE FOR STATIONARY CONVEYER WITH SUSPENSION BELT
I BEAM PERIODIC OSCILLATIONS
ELEMENTS JOINT IMPACT UPON DYNAMIC PROPERTIES OF OSCILLATING SYSTEMS IN PROBLEMS OF ENGINEERING OBJECT DYNAMICS
TEETH FORM EVOLUTION IN EXTERNAL CYLINDRICAL POWER GEARING
FORMATION METHOD OF OPTIMUM TESTING IMPACT AT DYNAMIC SYSTEMS TESTS
INVESTIGATION OF CASTING PATTERN ABRASION RESISTANCE OBTAINED USING ADDITIVE TECHNIQUES
IMPACT OF POSITION ERROR OF COMPOSITE AXISYMMETRIC BODY JOINT SURFACES UPON POSITION ERROR OF EXECUTING SURFACES
WAVE DEFORMATION MULTI-CONTACT LOADING
CONTROL OF PART SURFACE PARAMETER QUALITY DURING PROCESSING WITH SURFACE PLASTIC DEFORMATION
DETECTION OF NATURAL OSCILLATION FREQUENCIES AND COEFFICIENTS OF RELATIVE DAMPING OF DYNAMIC SYSTEM AT MILLING BY METHOD OF OPERATION MODAL ANALYSIS
CREATION OF PERSPECTIVE SMALL-SIZE GAS-TURBINE INSTALLATIONS WITH INDEPENDENT ROTATING SPEEDS COMPRESSOR AND TURBINE
COMPUTER ACCURACY CONTROL OF WORM GEAR ASSEMBLAGE AND RUNNING-IN
ANALYSIS OF LASER-HYBRID WELDING IN PRODUCTION ENVIRONMENT
IMPACT OF CUTTING FORCE RADIAL COMPONENT AND TOOL MANDREL GEOMETRICAL PARAMETERS UPON ITS POSITION IN MACHINE SPINDLE
PLASTIC MICROGRINDING – ALTERNATIVE METHOD OF BRITTLE MATERIAL MACHINING
CHOICE OF BELT CONVEYER DRICE CIRCUIT USING FUZZY VALUES OF CRITERIA
ACOUSTIC SAFETY SUPPORT AT MACHINING FLAT PARTS WITH BALL-ROD HARDENER
ESTIMATE OF FRICTION PAIR RUNNING-IN DURATION WITH SOLID LUBRICANT COATING UNDER DIFFERENT OPERATING CONDITIONS
CHARACTER CHANGES OF FRICTION SELF-OSCILLATIONS AT SLIP VELOCITY INCREASE
EQUIPMENT FOR WASHING BULK MATERIAL AND ABRASIVE MEDIA WITH AMPLITUDE EXCEEDING 500 MM
EQUIPMENT BASED ON SCREW ROTORS IN MECHANICAL ENGINEERING
TECHNOLOGICAL CONDITIONS OPTIMIZATION FOR ALUMINUM ALLOY THIN-WALLED PARTS MACHINING TO DECREASE RESIDUAL DEFORMATIONS
MODEL OF MANIPULATOR GRAPPLE MOTION IN OPEN-ENDED PATH APPROXIMATED WITH FOURIER TRUNCATED DIGITAL TRANSFORM
INVESTIGATION OF SOTS AND AMO IMPACT UPON THREAD-CUTTING RELIABILITY IN ULTRA-SMALL HOLES
DEVELOPMENT OF METHOD FOR DESIGN OF WORKING TOOL PART FOR MILLING
IMPROVEMENT OF TECHNOLOGY FOR FINISH ABRASION OF SILICON CARBIDE PLATES
INVESTIGATION OF HEAVY DUTY SELF-ACTING FLUID FILM BEARING OF REDUCER OF TURBO-JET BYPASS ENGINE OF NEW GENERATION FOR SHORT- AND MEAN HAUL CIVIL AVIATION
INFLUENCE OF PRELIMINARY INDUCTION HEATING ON EFFICIENCY OF FAIR TURNING OF DETAILS FROM ZHELEZOUGLERODISTY ALLOYS
INVESTIGATION OF FACETED THROUGH-AWAY TIP DURABILITY AT THERMALLY HARDENED 40H2N2MA STEEL TURNING
MODEL DEVELOPMENT OF TAPER MULTI-FACTOR DEPENDENCE OF PINHOLES OBTAINED BY ELECTRO-EROSION BROACHING
PRODUCTION, MICROSTRUCTURE AND MICROHARDNESS OF ALUMINUM-MATRIX COMPOSITES ALLOYED WITH CARBON
FUNCTIONAL REQUIREMENTS TO CUTTERS AND THEIR SUPPORT ON NC GRINDING-SHARPENING MACHINES
RATIONAL PARAMETER EXPERIMENTAL DEFINITION OF ELEMENTS FOR JET FORMING PATH OF PLANT FOR UNDERWATER MATERIAL HYDROABRASIVE-JET CUTTING
CUTTING FORCE DECREASE AT LEADING METAL PLASTIC DEFORMATION
THREAD RESTORATION TECHNOLOGY OF TOOL-JOINT IN DRILL PIPES BY METHOD OF ELECTRIC CONTACT WELD DEPOSITION INTO UPSET GROOVE
SURFACE QUALITY SUPPORT IN METAL PRODUCTS AT COMPLEX METHODS OF PROCESSING
CONTROL AUTOMATION OF DIE CASTING PROCESS WITH CRYSTALLIZATION
INERTIAL COUPLING IMPACT UPON OSCILLATION AMPLITUDE DISTRIBUTION OF WORK APPARATUS OF TECHNOLOGICAL VIBRATING MACHINE
INVESTIGATION OF MAGNETIC FIELD IMPACT UPON FRICTION MOMENT AND SEALING ABILITY OF MAGNETIC LIQUIDS
ENGINEERING SURFACE GEOMETRICAL MODELING OF CHOSEN CLASSES
VIBRATION RESISTANCE AT PROCESSING BY END MILLS WITH VARIABLE PITCH
ASSESSMENT EXPERIMENTS ON FATIGUE RESISTANCE OF STRUCTURAL MATERIALS AND MACHINERY
MACHINE OPERATING UNIT IMPROVEMENT BASED ON SCREW ROTORS
THERMODYNAMIC STRENGTHENING OF HARD ALLOY DRAWING TOOL
PECULIARITIES OF CUTTING MODE OPTIMIZATION TAKING INTO ACCOUNT RANDOM FACTOR
BASIC CHARACTERISTICS CONTROL OF METALS HAVING EFFECT OF SHAPE MEMORY
INTER-METALLIDE COATING STRUCTURE AFTER THERMO-CYCLING
DEVELOPMENT OF DOCTRINE ON CONTACT STIFFNESS AND ENGINEERING OF MACHINERY SURFACE
MACHINERY WEAR-RESISTANCE INCREASE BY COMBINED ELECTRO-MECHANICAL TREATMENT
SURFACE LAYER ROUGHNESS IN OPTICAL PRODUCTS AFTER DIAMOND MICRO-TURNING
ROUGHNESS OF PARTS SURFACES WITH SPUTTERED AMORPHOUS CRYSTALLINE COATINGS IRON BASED WORKED BY TOOLS WITH PSCBN
TOPOHRAPHY AND AREA OF WORN CYBORG END FLANK AT HARDENED STEEL SHH15 FINISH TURNING
FINITE ELEMENT MODEL USE FOR SOLUTION OF CONTACT PROBLEMS TAKING INTO ACCOUNT ROUGHNESS OF SOLID SURFACES
FUNDAMENTALS OF IRON-CARBON ALLOY WEAR-RESISTANCE IN-CREASE AT CORROSION-MECHANICAL WEAR
COG-WHEEL GRINDING WITH ABRASIVE CUBIC BORON NITRIDE DISKS
MODELING OF WAVE DEFORMATION LOADING OF ALUMINUM-MAGNESIUM ALLOYS
ELASTIC CONTACT MODELING OF SOLIDS WITH STANDARD MICRORELIEF
SUBSTANTIATION OF CHOICE OF ENGINEERING PRODUCE QUALITY INDICES AT ADOPTED STRATEGIES OF STAGE REALIZATION OF THEIR LIFE CYCLE
TOOL DESIGN PECULIARITIES FOR MILLING
OPTIMIZATION OF AUTOMATED WINDING TECHNOLOGY USING NC MACHINES
GENERAL SYSTEM PROPERTIES AND PROCESS INDICES
TRIBOLOGY DEVELOPMENT
INVESTIGATION OF METAL AND ALLOY ELECTRONIC STRUCTURE IMPACT UPON ELECTROCHEMICAL CORROSION
COMPUTATION OF SURFACE ROUGHNESS PARAMETERS FOR TECHNOLOGICAL SUPPORT
TECHNOLOGY FOR PARTS FORMATION USING 3D MODELING AND 3D SCANNING AND DEVELOPMENT OF SYSTEM FOR QUALITY PREDICTION OF PARTS OBTAINED THROUGH 3D PRINTING
IMPROVEMENT OF TECHNOLOGY AND EQUIPMENT FOR PLASTIC PRODUCT MACHINING
THEORETICAL INTERRELATION ASCERTAINMENT OF WEAR-RESISTANCE AND FATIGUE STRENGTH WITH CONDITIONS OF ELECTRO-EROSION TREATMENT
STANDARDIZATION OF GEOMETRICAL ACCURACY IN MECHANICAL ENGINEERING
EXAMPLE OF ASSESSMENT PROCEDURE REALIZATION OF PRODUCTION SYSTEMS ON “SIGNAL-NOISE” CRITERION AT MANUFACTURING HARD-ALLOY BORON-MILLERS
SCIENCE-INTENSIVE PRODUCT QUALITY CONTROL ON TEST RESULTS
EFFICIENT CHOICE OF METHOD FOR PARTS REDUCTION BY METHOD OF MANUAL ARC WELD SURFACING OF WEAR-RESISTANT LAYER
INVESTIGATION OF STRESS-STRAIN AND TRIBOLOGICAL PROPERTIES OF COMPOSITE COATINGS ARMORED WITH QUASI-CRYSTALLINE AND OBTAINED THROUGH METHOD OF COLD GAS-DYNAMIC SPUTTERING
DYNAMIC STIFFNESS IMPACT OF PROCESSING ROBOT UPON PARTS WORKED SURFACE QUALITY
INVESTIGATION OF WHITE ALLOYED CAST IRON DUCTILITY
REGULATIONS OF ROUGHNESS PARAMETERS FOR MACHINERY FUNCTIONAL SURFACES IN TECHNOLOGICAL DOCUMENTATION
ANALYTICAL APPROACH TO TECHNOLOGICAL SUPPORT OF FATIGUE LIMIT
IMPROVING THE USEFUL ACTION COEFFICIENT TEETH GRIPPING
STRUCTURAL SYNTHESIS OF SELF-ALIGNING GEARS OF INDUSTRIAL ROBOTS WITH PARALLEL KINEMATICS
WORKING CAPACITY TECHNOLOGICAL SUPPORT OF HEAVY DUTY PARTS AND PRODUCTION TOOLING ELEMENTS
RELIABILITY TECHNOLOGICAL SUPPORT OF FRICTION UNIT PARTS OF SCIENCE INTENSIVE ASSEMBLY UNITS
AUTOMATED SYSTEM FOR SURFACE PARALLELISM CONTROL IN PRISMATIC PARTS
MODELS OF PHYSICALLY SHORT AND MACROSCOPIC CRACK DEVELOPMENT AND THEIR APPLICATION FOR TIN BASED BABBIT
DYNAMOMETER CHOICE FOR CUTTING FORCE MEASUREMENT AT END MILLING
INVESTIGATION OF HOLE CYLINDRICAL SURFACE FORMATION PROCESS AT STRATEGY OF FINISH MILLING BY END-MILLING CUTTERS WITH CIRCULAR INTERPOLATION
SPHERICAL ROLLER GEAR WITH DOUBLE-ROW PINION: POWER COMPUTATIONS AND PERFORMANCE COMPUTATION
STRUCTURE FORMATION OF Α-FE THIN SURFACE LAYER WITH GLOW DISCHARGE PLASMA
DEFINITION OF IMPROVEMENT STRATEGIC DIRECTIONS USING TOOLS OF QUALITY CONTROL
APPLICATION OF FINISH-STRENGTHENING PROCESS WITH DIAMOND SMOOTHING FOR BEARING CAPACITY INCREASE OF JOINTS WITH TIGHTNESS
BLADE PARTS COMBINED PROCESSING AT HIGH-SPEED ROTOR DEVELOPMENT
INVESTIGATION OF PHYSICAL PHENOMENA OCCURRED IN CONTACT AREA OF BULK PARTICLES AT THEIR MOTION IN SCREW DRUMS BY METHODS OF SIMILARITY THEORY, ENGINEERING AND COMPUTER GRAPHICS
CALCULATION OF MULTI-BLADE CUTTING TOOL RELIABILITY
ANALYSIS OF TOOL OSCILLATION FOR CASES OF SINGLE-CUTTER PROCESSING AND WITH CUTTERS OPPOSITE LOCATION
PECULIARITIES IN ROUGHNESS FORMATION OF CONJUGATE CYLINDRICAL AND END SURFACES OF PARTS AT GRINDING WITH ONE TOOL
DEVELOPMENT OF PIPE WELDING TECHNOLOGY WITH PULSE ARC FITTINGS BY TUNGSTEN ELECTRODE IN ARGON ENVIRONMENT
REINFORCED COMPOSITE SLIDING BEARINGS
FINISH-STRENGTHENING EFFECTIVENESS INCREASE BASED ON USE OF SCREW ROTORS WITH WAVE SURFACE ON PERIMETER
PORTABLE MACHINE MODULE FOR PROCESSING WORN WEDGE GROOVES OF ROLLING-STOCK BOGIE FRAME WITH LASER BASING
MACHINERY LIFE AS CONTINUOUS FLOW OF TECHNOLOGIES
DESIGN OF ROUGH HOBBING CUTTER FOR MACHINING OF COG-WHEEL OF LARGE MODULE
DEFINITION OF THERMAL DISPLACEMENTS IN SHAPING OF MANUFACTURING EQUIPMENT UNITS
DYNAMICS OF REINFORCED COMPOSITE PANEL WITH MONO-LAYER COMBINED STACKING WITH INNER DAMAGES AT NON-STATIONARY IMPACTS
ASSESSMENT OF GERM CRITICAL DIMENSION AND CONDITIONS OF TITANIUM CARBIDE CRYSTALLINE PHASE GROWTH DURING SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
ADDITIVE-SUBTRACTIVE TECHNOLOGIES – EFFECTIVE TRANSITION TO INNOVATION PRODUCTION
SYSTEM DEVELOPMENT FOR DEFINITION OF CONTACT INTERACTION MODE IN LINK OF SLIDING ROBOT WITH OBSTACLE
INCREASE OF EFFECTIVENESS AND TECHNOLOGICAL POTENTIALITIES OF FINISHING-STRENGTHENING
ADAPTIVE POTENTIALITIES OF HYDRO-MECHANICAL COUPLING WITH DIFFERENTIAL DRIVING GEAR
USE OF SURFACING MATERIALS MODIFIED WITH REFRACTORY COMPONENTS FOR REDUCTION OF ROLLERS IN BLANK CONTINUOUS CASTING MACHINES
SIMULATION OF METAL TRANSFER BETWEEN CYLINDRICAL ELECTRODES AT ELECTROSPARK ALLOYING
PRASEODYMIUM IMPACT UPON TEMPERATURE DEPENDENCE OF SPECIFIC HEAT AND THERMODYNAMIC FUNCTION CHANGES OF ALUMINUM ALLOY AZH2.18
APPLICABILITY ANALYSIS OF STRESS STATE CRITERIA FOR DESCRIPTION OF BABBIT LAYER FATIGUE DESTRUCTION IN SLIDER BEARINGS
EXPERIMENTAL DEFINITION OF BASING ACCURACY AND TOOL FASTENING
THEORETICAL ANALYTICAL SOLUTION OF PROBLEM ON STATIONARY SUBCRITICAL CURRENT OF GASEOUS HEAT CARRIER IN PIPING BIFURCATIONS OF HEAT-EXCHANGE EQUIPMENT
INVESTIGATION OF OUTPUT PARAMETER CORRELATION OF CUTTING ENGINEERING PROCESS WITH MASS HARD-ALLOY REPLACEABLE METAL CUTTING PLATES
CHOICE OF SUPPORTING ELEMENTS AT WIRE SURFACING IN ADDITIVE TECHNOLOGIES
ADHESION STRENGTH INVESTIGATION OF FILM ANTIFRICTION COATINGS
DESIGN AND COMPUTATION OF THERMOMECHANICAL NUTRUNNER FOR LARGE DIAMETER THREAD TIGHTENING
COMBINING OF MATERIAL STRAIN PROCESSING METHODS
IMPACT OF ENVIRONMENT PROCESSED UPON EFFECTIVENESS OF SHOCK PULSE ENERGY TRANSFER AT WAVE DEFORMATION STRENGTHENING
SIMULATION MODEL OF PAD ELECTRIC-ARC LAYER GROWTH OF
RESIDUAL STRESS DISTRIBUTION DURING WELDING UNDER CONDITIONS OF LOW CLIMATIC TEERATURES
DEVELOPMENT OF THE CLASSIFICATION OF SCREW SIEVES
IMPACT OF CORRUGATION AND ROUGHNESS OF SURFACE UPON NORMAL CONTACT STIFFNESS OF FLAT JOINT
ABRASIVE DISC IMPREGNATION
DYNAMICS OF VIBRATION-PROOF SYSTEMS WITH CONTROLLED MECHANISM OF CONNECTION IMPOSITION
CUTTING OUTPUT PARAMETER EFFECTIVENESS CONTROL BASED ON ANALYSIS OF MASS-DIMENSIONAL PARAMETERS OF REPLACEABLE HARD-ALLOY PLATES
THEORETICAL INVESTIGATION OF UNITS GEOMETRICAL ACCURACY IMPACT OF PROCESSING EQUIPMENT WITH HYBRID LAYOUT UPON ADDITIVE SHAPING ERROR
TEST BENCH FOR INVESTIGATION OF WAVE DEFORMATION STRENGTHENING PROCESSES
PROPERTIES RESEARCH OF ALUMINUM HYDROXIDE POWDER OBTAINED THROUGH CHEMICAL DISPERSION OF ALLOY V95 SCRAP
REAL PRODUCT SIZE ACCOUNTING PROBLEM AT WAVE DEFORMATION HARDENING
STRUCTURE AND PROPERTIES OF COATINGS ON PRODUCTS MADE OF STEEL 09G2S, STEEL 3 AND STEEL 12H18N10T
PHYSICAL-MATHEMATICAL MODEL OF BENDING FIBER-OPTIC SENSOR OF FORCE
BASIC FUNDAMENTALS TO ENSURE AND INCREASE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS
PRODUCT QUALITY AT DESIGN STAGE
MACHINERY QUALITY SUPPORT BASED ON IMPRUVEMENT OF METHODS AND MEANS FOR ESTIMATE OF TRIBO-TECHNICAL PARAMETERS OF MACHINERY FUNCTIONAL UNITS
SIMULATOR FOR ROUGHNESS MEASUREMENT WITH SPHERICAL PROBE
MATING SURFACES MACHINING IN CROSSED CHANNELS
INDUCTION METHOD FOR PARAMETER INVESTIGATIONS OF DISPERSION FERROMAGNETICS
INFLUENCE OF FORCE OF INERTIA ON COATING CLUTCH WITH EXTERNAL SURFACE OF ROTATION BODIES WHEN COATING
EQUIPMENT FOR GRINDING-FINISHING BASED ON SCREW ROTORS
INFORMATION-MEASURING COMPLEX FOR INVESTIGATION OF MELTING AND ELECTRODE METAL TRANSFER AT ARC WELDING
CALCULATION OF CONTROLLED TIGHTENING EFFORT IN GROUP BOLTED JOINT
INVESTIGATIONS OF DENSITY AND POROSITY OF COATINGS MADE OF CERAMIC-POLYMERIC OR COMPOSITES WITH QUASI-CRYSTALS OBTAINED WITH GAS-DETONATION METHOD AND METHOD OF GAS-DYNAMIC SPUTTERING
TO CALCULATION OF ELLIPTIC CRUSHER WITH FORM MEMORY EFFECT
OUTLOOKS IN SURFACE PLASTIC DEFORMATION USE TO DECREASE SURFACE ROUGHNESS IN ROLLING MILL PARTS STRENGTHENED WITH SVS-ELECTRODE MATERIALS
IMPROVEMENT OF ELASTIC SLEEVE-PIN CLUTCH DESIGN
IMPACT OF WELD DEPOSITION MODES UPON CHARACTERISTICS OF ELECTRODE METAL HEAT AND MASS TRANSFER, FORMATION OF STRUCTURE AND SURFACE PROPERTIES
MACHINERY OPERATIONAL PROPERTY CONTROL DURING DIAMOND-ABRASIVE FINISHING USING ACTIVE SOTS
SCHROEDINGER EQUATION USE FOR INVESTIGATIONS OF PHENOMENA TAKING PLACE IN PLASMA GENERATOR OF GLOW DISCHARGE
MAGNETIC FIELD IMPACT UPON TRIBOTECHNICAL CHARACTERISTICS OF PERMANENT CONNECTIONS IN RELATION TO FRICTION SHOCK ABSORBERS
TRANSFER PROCESSES IN DISPERSION SYSTEMS AND NANO-SYSTEMS CONTAINING SPHERICAL AND CYLINDRICAL PARTICLES
INVESTIGATION OF DEPENDENCE IMPACT OF TOOL GEOMETRICAL PARAMETERS AND CUTTING SPEED UPON SHAPING EFFORT AT HELICAL GROOVE CUTTING ON INTERNAL SURFACE OF CYLINDRICAL SHELL
MICRO-HARDNESS AND WEAR-RESISTANCE INVESTIGATION IN CARBO-METAL COATING COMPOSITES OBTAINED THROUGH GAS-DETONATION METHOD
MAGNETIC FIELD IMPACT UPON TRIBOTECHNICAL CHARACTERISTICS OF SLIDING FRICTION PAIRS WITH RESPECT TO FRICTION SHOCK ABSORBERS
RELIABILITY INCREASE OF THREAD CUTTING WITH TAP BORERS IN SUPER-SMALL HOLES
MULTICHOICE APPROACH TO SOLUTION OF OPTIMIZATION PROBLEMS OF ALGORITHMIC DESCRIPTION FORMATION OF PROCESSING ROUTES
INVESTIGATION OF COMBINED METHOD USE FOR COPPER AND ALUMINUM ALLOY PROCESSING
ELECTROSPARK COATING PROCESSING WITH METHOD OF ULTRASONIC PLASTIC DEFORMATION
ENTERPRISE SUBSYSTEMS INTERACTION UNDER PURPOSEFUL CONTROL OF PRODUCT QUALITY
QUALITY SUPPORT OF PARTS MANUFACTURED BY MEANS OF ADDITIVE TECHNOLOGIES
STRENGTH PROPERTIES INVESTIGATION OF COMPOSITE COATINGS WITH QUASI-CRYSTALS OBTAINED THROUGH METHODS OF GAS DYNAMIC SPUTTERING
IMPACT OF INTERLAMINAR ELLIPTICAL DEFECTS UPON BEHAVIOR OF RECTANGULAR CARBON PLASTIC PLATE AT STATIC AND DYNAMIC LOADS
MONITORING OF AUTOMATED TECHNOLOGICAL ENVIRONMENT FOR TOOL WORKING IN PLASMA-GENERATOR OF GLOW DISCHARGE BASED ON NEURONET APPROACH
OPERATION CONDITIONS IMPACT OF SUBMERSIBLE PUMP EQUIPMENT UPON ITS WORKING CAPACITY
DIAGNOSTICS OF ENGINEERING CUTTING SYSTEM USING CUTTING FORCE PARAMETERS
INTERACTION OF SPATIAL OSCILLATION WITH ROUGHNESS OF SURFACE WORKED BY EXAMPLE OF TURNING
PECULIARITIES IN TUNGSTEN ALLOY PARTS PROCESSING FOR OIL-GAS INDUSTRY
AUTOMATED EFFECTIVENESS CONTROL SYSTEM OF TOOL HOUSE FOR TOOL STRENGTHENING IN GLOW DISCHARGE
MATERIAL MODELS AT RESEARCH OF WAVE DEFORMATION STRENGTHENING THROUGH FINITE ELEMENT METHOD
INVESTIGATION OF BULK MATERIAL MOTION IN SPIRAL SIEVES
COMPOSITE USE IN NOSE CONE DESIGNING FOR AIRCRAFTS
IMPACT OF MATERIAL AND DIMENSIONS OF PRODUCT UPON PARAMETERS OF WAVE DEFORMATION STRENGTHENING
REALIZATION OF MULTI-STAGE MODEL OF BABBIT FATIGUE DAMAGES AND BABBIT ANTI-FRICTION LAYERS
AUTOMATED SYSTEM FOR QUALITY CONTROL OF TOOL PROCESSING IN GLOW DISCHARGE BASED ON NEURAL NETWORK MONITORING
FUINDAMENTALS DEVELOPMENT FOR COMPUTATION OF SCREW SCREENS FOR BULK MATERIAL SEPARATION AND EXPERIENCE OF THEIR INTRODUCTION TO PRODUCTION
CHOICE OF ALLOY, COATING AND GEOMETRICAL PARAMETERS OF CUTTER PLATE FOR FACE MILLING OF HIGH-CARBON HARDENED 95H18-SH STEEL
RESEARCH OF MELT PROCESSING IMPACT WITH ELECTROMAGNETIC PULSES UPON SILUMIN WEAR-RESISTANCE
COMPLEX APPROACH METHODOLOGY AT DESIGNING VENTILATING EQUIPMENT WITH HEAT RECUPERATOR FOR ENTERPRISES OF ENGINEERING INDUSTRY
TECHNOLOGICAL CAPACITY UPDATING OF CONTINUOUS RUN-IN GEAR GRINDING METHOD
RADIAL STIFFNESS ANISOTROPY OF BODY BORING FOR LATHE SPINDLE BEARINGS
SWIVEL JOINT WEAR-RESISTANCE INCREASE OF PROCESSING MACHINE MANIPULATORS
MILLING EFFECTIVENESS INCREASE BY MEANS OF HARD-ALLOY COMPOUND END MILLING CUTTERS
VIBRATORY ACTIVITY INVESTIGATION OF GRINDING MACHINE ELECTRIC SPINDLES
TECHNOLOGICAL DESIGNING NC LATHES BASED ON REGIONAL MACHINERY AND DEVICE DATA BANK
IMPROVEMENT OF METHODICAL SUPPORT IN OPERATION SETUP OF UNIVERSAL MACHINE-TOOLS AT MOTOR CAR REPAIR COMPANIES
QUALITATIVE INDEX ASSURANCE FOR PARTS MACHINED WITH IMPREGNATED ABRASIVE TOOL
SURFACE ROUGHNESS IMPROVEMENT OF PARTS MADE OF POLYMERIC MATERIALS OBTAINED BY MEANS OF ADDITIVE TECHNOLOGIES
TOOTH LEG EXCESSIVE UNDERCUT ELIMINATION IN HELICAL CYLINDRICAL GEARS WITH PROTUBERANCE OF HOBBING CUTTER BASED ON GRAPHIC RUN-IN
INVESTIGATIONS OF TECHNOLOGICAL PARAMETERS IMPACT UPON QUALITY FORMATION IN SURFACE LAYER OF PARTS AT CENTRIFUGAL ROTARY PROCESSING
AUTOMATION OF CONTROL PROCESS TO ENSURE TOOL QUALITY DURING FINISHING WITH GLOW DISCHARGE PLASMA
MODE INFLUENCE OF SELECTIVE LASER IMPACT UPON POROSITY OF SAMPLES OF COBALT, CHROMIUM AND MOLYBDENUM POWDERS
FORMATION BY MECHANICAL ALLOYING TI-AL COATINGS WITH COBALT AND NICKEL ADDITIVES
STAND OF SYSTEMS AND MEANS OF AUTOMATION OF EQUIPMENT REFUELING OF PETROLEUM RESERVOIRS
DETERMINATION OF THE DIMENSIONAL AND TOPOLOGICAL PARAMETERS OF THE GRAPHITE PHASE IN CAST IRON BY FRACTAL ANALYSIS OF IMAGES OF ITS MICROSTRUCTURE
FINE GRIT TREATMENT OF RANGY PLATES
CONTROL AND MONITORING OF FUSION WELDING BY WAY OF EXAMPLE OF MANUFACTURING AIRCRAFT AIR CONDITIONING SYSTEMS ELEMENTS
CIRCUITRY , STRUCTURE AND PROPERTIES OF HETEROGENEOUS MATERIALS
ARRANGEMENT OF ENGINEERING MODELING OF TECHNOLOGICAL SYSTEMS FOR SOLVING PRODUCTION TASKS OF DIVERSE COMPLEXITY
IMPROVING THE EFFICIENCY OF MILLING HOLES WITH A SMALL-SIZED TOOL IN THE CONDITIONS OF AUTOMATED PRODUCTION
APPLICATION OF ELECTRICAL TECHNOLOGIES FOR THE RESTORATION OF AGRICULTURAL MACHINERY PARTS
DEVELOPMENT OF ALGORITHM FOR AUTOMATED ASSESSMENT OF THE TIGHTNESS OF CONTACT SEALING CONNECTIONS OF ISOLATION VALVES
SIMULATION OF DOOR MOVEMENT WITH A CLOSING MECHANISM
EVALUATION OF SURFACE DEFECTS OF PRODUCTS USING DIGITAL TECHNOLOGIES
THEORETICAL MATHEMATICAL MODELING OF HEAT EXCHANGE IN PIPES WITH TRIANGULAR AND SQUARE TURBULATORS WITH D/D=0.95÷0.90, T/D=0.25÷1.00 AND HIGH REYNOLDS NUMBERS RE=106
METHODOLOGICAL FOUNDATIONS OF DIAGNOSTICS OF METALWORKING TECHNOLOGICAL SYSTEMS ACCORDING TO PARAMETRIC RELIABILITY OF ENSURING A GIVEN QUALITY OF THE TREATED SURFACES
ENSURING TIGHTNESS IN PRESSURE COUPLING PARTS
THE COATING INFLUENCE OF PARTS MADE OF NON-FERROUS METALS AND ALLOYS ON THEIR WEAR RESISTANCE
IMPROVING THE TRIBOTECHNICAL CHARACTERISTICS OF THE LUBRICANT INTENDED FOR LUBRICATING THE WHEEL FLANGE OF THE MAINLINE LOCOMOTIVE
TRIBOLOGICAL PARAMETERS AND STRUCTURAL CHARACTERISTICS OF COATINGS MADE OF CERAMIC POLYMERS OR COMPOSITE MATERIALS REINFORCED WITH QUASICRYSTALS AND CARBON NANOTUBES, OBTAINED BY HIGH-SPEED ION-PLASMA MAGNETRON SPUTTERING
COMPREHENSIVE ANALYSIS OF THE PARTS SURFACE LAYER AFTER DIAMOND SMOOTHING
ENERGY EFFICIENCY INCREASE OF ROTARY PUMP BY CONVERGENCY INTRODUCTION OF WHEEL INTER-BLADE CANAL
REASONS FOR THE CHOICE OF THE THERMAL PIPE FOR THE COMPLEX COOLING SYSTEM OF THE COMBINED CUTTING TOOLS
DEPENDENCE OF THE MEAN AND DISPERSION OF GRAIN WIDTH OF SILICON CARBIDE BLACK GRINDING POWDERS ON THE MESH SIZE OF A PASS SIEVE
OPTIMIZATION OF AVIATION COMPLEX ERGONOMICS CHARACTERISTICS THROUGH METHOD OF SIMULATION INVESTIGATIONS OF AIRCRAFT SYSTEMS
EFFICIENT ORGANIZATION ALGORITHMS OF INTERCONNECTIONS OF ELASTIC AND HYDRODYNAMIC CONSTITUENTS OF FINITE ELEMENT SIMULATION OF FRICTION UNIT ELASTIC HYDRODYNAMICS
DESIGN OF MECHANICAL BROACH PARTS FOR AIRCRAFTS IN SOLIDWORKS SYSTEM
PERIODIC SOLUTIONS PROBLEM OF HETEROGENEOUS STRING FORCED OSCILLATIONS EQUATION WITH BOUNDARY CONDITION OF THE THIRD TYPE
COMPUTATION OF PRESSURE AND TEMPERATURE FIELDS IN LUBRICATING LAYER OF TAPERED HYDROSTATIC DYNAMIC BEARINGS
DESIGNING OF A COMBINED TOOL FOR COMPLEX SURFACE MACHINING
INVESTIGATIONS OF CUTTING OPERATION PROCESS RESULTS ON BASIS OF MODELING USING SOFTWARE ENVIRONMENT
TEMPERATURE IMPACT OF SPINDLE UNIT BEARING UPON ITS STIFFNESS
CHOICE OF NECLEUS FUNCTION FOR PROBLEM COMPUITATION OF STEEL MOTION IN LIQUID PHASE IN VESSEL WITH OPEN WALL THROUGH SPH METHOD
INCREASE OF ENDURANCE AND WORKING CAPACITY OF STRUCTURAL STEEL BY ADDITIONAL CHEMICAL-THERMAL TREATMENT USING NITROGENOUS-CARBONIC CARBURIZERS
PRODUCTION RISKS AND PROSPECTS IN USE OF LASER WELDING AT MANUFACTURING LARGE DIAMETER PIPES
DEVICES FOR SAMPLE FASTENING DURING EXPERIMENTAL INVESTIGATIONS
SOLUTION OF PROBLEMS OF CURVED SURFACE APPROXIMATION BY LAYERS WITH CONSTANT AND VARIABLE CROSS-SECTIONS AT SHAPING WITH ADDITIVE METHODS
EFFECT RESEARCH OF SURFACE DEFORMATION IMPACT AND THERMAL TREATMENT AT MULTI-LAYER WELD DEPOSITION UPON MECHANICAL PROPERTIES AND POROSITY OF ALUMINUM ALLOY 1580
MODELING OF BILATERAL END-FINISHING KINEMATIC CHARACTERISTICS
PRINCIPLES OF FORMATION AND DESIGNING EQUIPMENT FOR FINISHING PARTS ON SCREW ROTOR BASIS
NEW APPROACHES TO DESIGNING VIBRATORY TECHNOLOGICAL TECHNIQUE IN FOOD AND PROCESSING INDUSTRY
STRUCTURAL ANALYSIS OF ROBOT MACHINE MECHANISMS WITH PARALLEL KINEMATICS
FUZZY DESCRIPTION AND CHOICE OF DESIGN CONCEPT
CUTTING EDGE ANALYTICAL DESCRIPTION OF REPLACEABLE INDEXABLE INSERTS OF COMPOUND FORM CUTTERS
INVESTIGATION OF CONTACT AREA AT STEEL C12M CUTTING BY MINERAL-CERAMICS VOK-71
FRACTURE MECHANISM OF 09G2S LOW-ALLOY STEEL WELDED SAMPLE SUBJECTED TO HEAT TREATMENT AND EQUAL CHANNEL ANGULAR PRESSING DURING IMPACT BENDING
SYSTEM OF AUTOMATED ASSEMBLY OF PARTS: ANALYSIS IN PHASE SPACE
SIMULATORS FOR CALIBRATION OF TOOL CENTER OF INDUSTRIAL ROBOTS
DEVELOPMENT OF TECHNOLOGICAL PROCESS OF ELECTRO-EROSION PROCESSING
DEVELOPMENT OF FUNCTIONALLY-ORIENTED TECHNOLOGICAL PROCESS OF ELECTRICAL DISCHARGE MACHINING
MACHINE UNIT ACCURACY ASSURANCE BASED ON COMMON MODULES TAKING INTO ACCOUNT JOINTS CONTACT STIFFNESS
EFFICIENCY INDICES OF METHODS AND MEANS IN AUTOMATED PARTS ASSEMBLY
IMPROVEMENT OF HARD-ALLOY END COMPOUND MILLER
EFFICIENCY OF GAS-TURBINE CYCLE WITH STEAM INJECTION AND ANALYSIS OF ITS INTERACTION WITH WATER DESALINATION PLANT
ENERGY ASPECTS OF PARTS VIBRATING PROCESSING WITH KERNEL ORGANIC ENVIRONMENT
MECHANISM WITH HIGHER KINEMATIC PAIRS
WAVY TOPOGRAPHY HETEROGENEOUS CUTTING AND DEFORMING TREATMENT WITH SURFACE-PLASTIC DEFORMATION
DESIGN OF QUALITY MANAGEMENT PROCESSES BASED ON QFD METHOD
ALGORITHM OF AUTOMATED SYSTEM OF MACHINE UTILIZATION CONTROL IN SMALL-LOT PRODUCTION OF ELECTRONICS PRODUCTS
STRENGTH INCREASE IN STEEL 45, 40H AND 35HGSA BY DEFORMATION WAVE STRENGTHENING
FORMATION OF ROTOR MOTION PATH USING NEURONET PROGRAMMING MODULE
PECULIARITIES IN REDUCTION TREATMENT OF RAILROAD CAR WHEELS
DIGITAL SPATIAL MODELS IN CLASSICAL APPLIED GEOMETRY
MODELING OF GENERATING SURFACES IN FEMALE MILLING CUTTERS WITH DESIGN RADIAL INFEED FOR MACHINING SHAFTS WITH HOMAXONIC PROFILE
GENERATION AND METHODS FOR VIBRO-ACOUSTIC ACTIVITY DECREASE IN GASCOMPRESSOR UNITS WITH GAS TURBINE DRIVE
EXPERIMENTAL INVESTIGATION OF CENTERLESS METHOD EFFICIENCY IN RACER STABILIZATION
STATIC LOAD CAPACITY OF SPHERICAL PLAIN BEARING
SIMULATION OF INDICATOR DIAGRAM OF AXIAL-PLUNGER HYDRO-MACHINE
POTENTIALITIES IN ADDITIVE-SUBTRACTIVE-STRENGTHENING TECHNIQUES
STEAM TURBINE DEVELOPMENT FOR SUPERCRITICAL STEAM PARAMETERS
ASSESSMENT OF STEAM HUMIDITY INFLUENCE IN PRACTICAL PROBLEMS OF SEAL METERING CHARACTERISTICS DEFINITION
ENERGETIC REGULARITIES OF PULSE LOADING BY SYSTEMS WITH INTERMEDIATE LINK
EXPERIMENTAL DEFINITION OF STATIC AND DYNAMIC CHARACTERISTICS OF BEARINGS WITH HIGHEST KINEMATIC PAIRS
Bulletin of Bryansk state technical university
HYBRID FINITE ELEMENT FOR SIMULATION OF STRESS STATE AT CRACK TOP IN 3D BODIES
Volume, issue
2017 № 6 Published
Authors
Mikhail Zernin
DOI
https://doi.org/10.12737/article_59cd76c49ad923.69778681
Published
24.10.2017
Bulletin of Bryansk state technical university
MATHEMATICAL DESCRIPTION OF COMPLEX CUTTER CUTTING EDGE AND UNIVERSAL PROCEDURE FOR GEOMETRY COMPUTATION OF LAYER CUT
Volume, issue
2017 № 6 Published
Authors
Andrey Nikonov , Anna L. Kameneva
DOI
https://doi.org/10.12737/article_59cd7480e2b768.12100312
Published
24.10.2017
Bulletin of Bryansk state technical university
RELIABILITY INCREASE OF THREAD CUTTING IN SUPERSMALL HOLES
Volume, issue
2017 № 6 Published
Authors
Mikhail Kulikov , Maksim Yagodkin
DOI
https://doi.org/10.12737/article_59cd770a54bdc3.16158240
Published
24.10.2017
Bulletin of Bryansk state technical university
ROTARY TURNING REALIZATION UNDER PRODUCTION CONDITIONS
Volume, issue
2017 № 6 Published
Authors
Mikhail Kulikov , Alexey Popov , Dmitriy Volkov
DOI
https://doi.org/10.12737/article_59cd769d871dd9.90790664
Published
24.10.2017
Bulletin of Bryansk state technical university
INVESTIGATION OF HEAT MODE AT GRINDING USING SOLID LUBRICANTS
Volume, issue
2017 № 6 Published
Authors
Vladimir Panayoti
DOI
https://doi.org/10.12737/article_59cd768176efe4.43678555
Published
24.10.2017
Bulletin of Bryansk state technical university
CORROSION IMPACT UPON RESULT OF OPTIMUM DESIGN OF METAL WARE FOR STATIONARY CONVEYER WITH SUSPENSION BELT
Volume, issue
2017 № 4 Published
Authors
Pavel Boslovyak , Galina Emel'yanova , Elena Zueva
DOI
https://doi.org/10.12737/article_5a02f9fb201191.00397278
Published
03.10.2017
Bulletin of Bryansk state technical university
I BEAM PERIODIC OSCILLATIONS
Volume, issue
2017 № 4 Published
Authors
Igor Rudakov
DOI
https://doi.org/10.12737/article_5a02f9fbca0633.98055214
Published
03.10.2017
Bulletin of Bryansk state technical university
ELEMENTS JOINT IMPACT UPON DYNAMIC PROPERTIES OF OSCILLATING SYSTEMS IN PROBLEMS OF ENGINEERING OBJECT DYNAMICS
Volume, issue
2017 № 4 Published
Authors
Aleksey Orlenko , Sergey V. Eliseev , Andrey Eliseev
DOI
https://doi.org/10.12737/article_5a02f9fc346cd0.20512782
Published
03.10.2017
Bulletin of Bryansk state technical university
TEETH FORM EVOLUTION IN EXTERNAL CYLINDRICAL POWER GEARING
Volume, issue
2017 № 4 Published
Authors
Igor' Titenok
DOI
https://doi.org/10.12737/article_5a02f9fe1a2b69.43281503
Published
03.10.2017
Bulletin of Bryansk state technical university
FORMATION METHOD OF OPTIMUM TESTING IMPACT AT DYNAMIC SYSTEMS TESTS
Volume, issue
2017 № 4 Published
Authors
Dosko Sergey , Veniamin Kirenkov , Aleksandr Molchanov
DOI
https://doi.org/10.12737/article_5a02f9fe97a5a7.40674404
Published
03.10.2017
Bulletin of Bryansk state technical university
INVESTIGATION OF CASTING PATTERN ABRASION RESISTANCE OBTAINED USING ADDITIVE TECHNIQUES
Volume, issue
2017 № 7 Published
Authors
Evgeniy Olkhovik
DOI
https://doi.org/10.12737/article_5a337fbb87fb85.27541064
Published
15.12.2017
Bulletin of Bryansk state technical university
IMPACT OF POSITION ERROR OF COMPOSITE AXISYMMETRIC BODY JOINT SURFACES UPON POSITION ERROR OF EXECUTING SURFACES
Volume, issue
2017 № 7 Published
Authors
Aleksandr Yamnikov , Ol'ga Yamnikova , Ivan Matveev , Elena Rodionova
DOI
https://doi.org/10.12737/article_5a337fbbafffe3.34523889
Published
15.12.2017
Bulletin of Bryansk state technical university
WAVE DEFORMATION MULTI-CONTACT LOADING
Volume, issue
2017 № 7 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.12737/article_5a337fbc06cd34.89965584
Published
15.12.2017
Bulletin of Bryansk state technical university
CONTROL OF PART SURFACE PARAMETER QUALITY DURING PROCESSING WITH SURFACE PLASTIC DEFORMATION
Volume, issue
2017 № 8 Published
Authors
Maksim Nagorkin , Vladimir Fedorov , Anatoliy Totay , Elena Kovaleva
DOI
https://doi.org/10.12737/article_5a3779fb6455f6.47680401
Published
18.12.2017
Bulletin of Bryansk state technical university
DETECTION OF NATURAL OSCILLATION FREQUENCIES AND COEFFICIENTS OF RELATIVE DAMPING OF DYNAMIC SYSTEM AT MILLING BY METHOD OF OPERATION MODAL ANALYSIS
Volume, issue
2017 № 8 Published
Authors
Konstantin Kravchenko , Sergey Kugaevskiy , Mihail Zhuravlev , Dmitriy El'kind
DOI
https://doi.org/10.12737/article_5a3779fbdb2d56.54584744
Published
18.12.2017
Bulletin of Bryansk state technical university
CREATION OF PERSPECTIVE SMALL-SIZE GAS-TURBINE INSTALLATIONS WITH INDEPENDENT ROTATING SPEEDS COMPRESSOR AND TURBINE
Volume, issue
2017 № 8 Published
Authors
Barskov Viktor , Rassokhin Viktor , Besedin Sergey
DOI
https://doi.org/10.12737/article_5a3779fc1eb7c5.51727041
Published
18.12.2017
Bulletin of Bryansk state technical university
COMPUTER ACCURACY CONTROL OF WORM GEAR ASSEMBLAGE AND RUNNING-IN
Volume, issue
2018 № 1 Published
Authors
Viktor Pashkevich
DOI
https://doi.org/10.12737/article_5a795ff85f8061.78036130
Published
19.06.2018
Bulletin of Bryansk state technical university
ANALYSIS OF LASER-HYBRID WELDING IN PRODUCTION ENVIRONMENT
Volume, issue
2018 № 1 Published
Authors
Aleksey Zabelin , Denis Savinov
DOI
https://doi.org/10.12737/article_5a795ff8cf8035.78116237
Published
19.06.2018
Bulletin of Bryansk state technical university
IMPACT OF CUTTING FORCE RADIAL COMPONENT AND TOOL MANDREL GEOMETRICAL PARAMETERS UPON ITS POSITION IN MACHINE SPINDLE
Volume, issue
2018 № 1 Published
Authors
Olga Y. Kazakova , Lana Gasparova , Andrey Kazakov
DOI
https://doi.org/10.12737/article_5a795ff91c1e31.61293206
Published
19.06.2018
Bulletin of Bryansk state technical university
PLASTIC MICROGRINDING – ALTERNATIVE METHOD OF BRITTLE MATERIAL MACHINING
Volume, issue
2018 № 1 Published
Authors
Ol'ga Sil'chenko
DOI
https://doi.org/10.12737/article_5a795ff7927143.25462906
Published
19.06.2018
Bulletin of Bryansk state technical university
CHOICE OF BELT CONVEYER DRICE CIRCUIT USING FUZZY VALUES OF CRITERIA
Volume, issue
2018 № 2 Published
Authors
Aleksandr Reutov
DOI
https://doi.org/10.12737/article_5ac49dc2b336e4.04586141
Published
19.06.2018
Bulletin of Bryansk state technical university
ACOUSTIC SAFETY SUPPORT AT MACHINING FLAT PARTS WITH BALL-ROD HARDENER
Volume, issue
2018 № 2 Published
Authors
Mihail Tamarkin , Elina Tischenko , Aleksandr Isaev
DOI
https://doi.org/10.12737/article_5ac49dc30826b3.63726809
Published
19.06.2018
Bulletin of Bryansk state technical university
ESTIMATE OF FRICTION PAIR RUNNING-IN DURATION WITH SOLID LUBRICANT COATING UNDER DIFFERENT OPERATING CONDITIONS
Volume, issue
2018 № 2 Published
Authors
Petr Hopin
DOI
https://doi.org/10.12737/article_5ac49dc34fc6b9.65746767
Published
19.06.2018
Bulletin of Bryansk state technical university
CHARACTER CHANGES OF FRICTION SELF-OSCILLATIONS AT SLIP VELOCITY INCREASE
Volume, issue
2018 № 2 Published
Authors
Evgeniy Lukashev , Mihail Sidorov , Mihail Stavrovskiy
DOI
https://doi.org/10.12737/article_5ac49dc391a5f0.62517432
Published
19.06.2018
Bulletin of Bryansk state technical university
EQUIPMENT FOR WASHING BULK MATERIAL AND ABRASIVE MEDIA WITH AMPLITUDE EXCEEDING 500 MM
Volume, issue
2018 № 2 Published
Authors
Georgy Serga , Eduard Hvostik , Natal'ya Kuznecova , Inna Tabachuk
DOI
https://doi.org/10.12737/article_5ac49dc3d3ba96.62717346
Published
19.06.2018
Bulletin of Bryansk state technical university
EQUIPMENT BASED ON SCREW ROTORS IN MECHANICAL ENGINEERING
Volume, issue
2018 № 3 Published
Authors
Georgy Serga , Eduard Hvostik
DOI
https://doi.org/10.30987/article_5b05328c1182c5.75415372
Published
25.06.2018
Bulletin of Bryansk state technical university
TECHNOLOGICAL CONDITIONS OPTIMIZATION FOR ALUMINUM ALLOY THIN-WALLED PARTS MACHINING TO DECREASE RESIDUAL DEFORMATIONS
Volume, issue
2018 № 4 Published
Authors
Roman Fomenko , Mihail Timofeev
DOI
https://doi.org/10.30987/article_5b28d1921f23d8.29887997
Published
25.06.2018
Bulletin of Bryansk state technical university
MODEL OF MANIPULATOR GRAPPLE MOTION IN OPEN-ENDED PATH APPROXIMATED WITH FOURIER TRUNCATED DIGITAL TRANSFORM
Volume, issue
2018 № 4 Published
Authors
Viktor Kaplya , Igor' Savickiy , Dmitriy Mastikov
DOI
https://doi.org/10.30987/article_5b28d1939379b2.77194070
Published
25.06.2018
Bulletin of Bryansk state technical university
INVESTIGATION OF SOTS AND AMO IMPACT UPON THREAD-CUTTING RELIABILITY IN ULTRA-SMALL HOLES
Volume, issue
2018 № 4 Published
Authors
Mikhail Kulikov , Maksim Yagodkin , Vitaliy Inozemtsev
DOI
https://doi.org/10.30987/article_5b28d1942d3947.54309251
Published
25.06.2018
Bulletin of Bryansk state technical university
DEVELOPMENT OF METHOD FOR DESIGN OF WORKING TOOL PART FOR MILLING
Volume, issue
2018 № 5 Published
Authors
Mikhail Kulikov , Dmitriy Volkov
DOI
https://doi.org/10.30987/article_5b5063dada43e9.19043071
Published
19.07.2018
Bulletin of Bryansk state technical university
IMPROVEMENT OF TECHNOLOGY FOR FINISH ABRASION OF SILICON CARBIDE PLATES
Volume, issue
2018 № 5 Published
Authors
Sergey Bishutin , Sergey Alehin
DOI
https://doi.org/10.30987/article_5b5063db196815.97217210
Published
19.07.2018
Bulletin of Bryansk state technical university
INVESTIGATION OF HEAVY DUTY SELF-ACTING FLUID FILM BEARING OF REDUCER OF TURBO-JET BYPASS ENGINE OF NEW GENERATION FOR SHORT- AND MEAN HAUL CIVIL AVIATION
Volume, issue
2018 № 5 Published
Authors
Aleksandr Piskarev , Vladimir Nizovcev , Ol'ga Sil'chenko , Marina Siluyanova , Viktoriya Kuricyna
DOI
https://doi.org/10.30987/article_5b5063db716cb0.96082942
Published
19.07.2018
Bulletin of Bryansk state technical university
INFLUENCE OF PRELIMINARY INDUCTION HEATING ON EFFICIENCY OF FAIR TURNING OF DETAILS FROM ZHELEZOUGLERODISTY ALLOYS
Volume, issue
2018 № 6 Published
Authors
Viktor Butenko
DOI
https://doi.org/10.30987/article_5b86566a393e61.84168359
Published
24.09.2018
Bulletin of Bryansk state technical university
INVESTIGATION OF FACETED THROUGH-AWAY TIP DURABILITY AT THERMALLY HARDENED 40H2N2MA STEEL TURNING
Volume, issue
2018 № 6 Published
Authors
Konstantin Makarenko , Andrey Tolstyakov
DOI
https://doi.org/10.30987/article_5b86566b2d4fc7.39968105
Published
24.09.2018
Bulletin of Bryansk state technical university
MODEL DEVELOPMENT OF TAPER MULTI-FACTOR DEPENDENCE OF PINHOLES OBTAINED BY ELECTRO-EROSION BROACHING
Volume, issue
2018 № 6 Published
Authors
A.M. Loyko , Anatoliy F. Boyko
DOI
https://doi.org/10.30987/article_5b86566b83cac8.63704747
Published
24.09.2018
Bulletin of Bryansk state technical university
PRODUCTION, MICROSTRUCTURE AND MICROHARDNESS OF ALUMINUM-MATRIX COMPOSITES ALLOYED WITH CARBON
Volume, issue
2018 № 6 Published
Authors
Nikolay Vetkasov , Anatoliy Kapustin , Valeriy Sapunov
DOI
https://doi.org/10.30987/article_5b86566bc52fa2.19787666
Published
24.09.2018
Bulletin of Bryansk state technical university
FUNCTIONAL REQUIREMENTS TO CUTTERS AND THEIR SUPPORT ON NC GRINDING-SHARPENING MACHINES
Volume, issue
2018 № 6 Published
Authors
Alexandr Khandozhko , Dmitriy Govorov
DOI
https://doi.org/10.30987/article_5b86566c31b754.37647845
Published
24.09.2018
Bulletin of Bryansk state technical university
RATIONAL PARAMETER EXPERIMENTAL DEFINITION OF ELEMENTS FOR JET FORMING PATH OF PLANT FOR UNDERWATER MATERIAL HYDROABRASIVE-JET CUTTING
Volume, issue
2018 № 7 Published
Authors
Vladimir Belov , Vadim Vel'tischev , Andrey Galinovskiy , Anna Ilyuhina , Dar'ya Mugla
DOI
https://doi.org/10.30987/article_5ba8a1860f13c0.98445000
Published
04.10.2018
Bulletin of Bryansk state technical university
CUTTING FORCE DECREASE AT LEADING METAL PLASTIC DEFORMATION
Volume, issue
2018 № 7 Published
Authors
Sergey Ambrosimov
DOI
https://doi.org/10.30987/article_5ba8a1865b1200.15607548
Published
04.10.2018
Bulletin of Bryansk state technical university
THREAD RESTORATION TECHNOLOGY OF TOOL-JOINT IN DRILL PIPES BY METHOD OF ELECTRIC CONTACT WELD DEPOSITION INTO UPSET GROOVE
Volume, issue
2018 № 7 Published
Authors
Andrey Parenko , Konstantin Makarenko
DOI
https://doi.org/10.30987/article_5ba8a18733e8e3.42998992
Published
04.10.2018
Bulletin of Bryansk state technical university
SURFACE QUALITY SUPPORT IN METAL PRODUCTS AT COMPLEX METHODS OF PROCESSING
Volume, issue
2018 № 7 Published
Authors
Vitaliy Inozemtsev , Marat Krukovich
DOI
https://doi.org/10.30987/article_5ba8a185b8f820.98212961
Published
04.10.2018
Bulletin of Bryansk state technical university
CONTROL AUTOMATION OF DIE CASTING PROCESS WITH CRYSTALLIZATION
Volume, issue
2018 № 7 Published
Authors
Maksim Denisov , Vladimir Korostelev
DOI
https://doi.org/10.30987/article_5ba8a18a13c5b6.98496387
Published
04.10.2018
Bulletin of Bryansk state technical university
INERTIAL COUPLING IMPACT UPON OSCILLATION AMPLITUDE DISTRIBUTION OF WORK APPARATUS OF TECHNOLOGICAL VIBRATING MACHINE
Volume, issue
2018 № 7 Published
Authors
Kuang Vyong
DOI
https://doi.org/10.30987/article_5ba8a18acfb2d2.24898173
Published
04.10.2018
Bulletin of Bryansk state technical university
INVESTIGATION OF MAGNETIC FIELD IMPACT UPON FRICTION MOMENT AND SEALING ABILITY OF MAGNETIC LIQUIDS
Volume, issue
2018 № 7 Published
Authors
Sergey Shets , Aleksandr Gorlenko
DOI
https://doi.org/10.30987/article_5ba8a18c3524e8.26206454
Published
04.10.2018
Bulletin of Bryansk state technical university
ENGINEERING SURFACE GEOMETRICAL MODELING OF CHOSEN CLASSES
Volume, issue
2018 № 8 Published
Authors
Lidiya Nartova , Valeriy Bodryshev
DOI
https://doi.org/10.30987/article_5bb5e68582adf3.47757069
Published
25.10.2018
Bulletin of Bryansk state technical university
VIBRATION RESISTANCE AT PROCESSING BY END MILLS WITH VARIABLE PITCH
Volume, issue
2018 № 8 Published
Authors
Mihail Zhuravlev , Konstantin Kravchenko , Dmitriy El'kind
DOI
https://doi.org/10.30987/article_5bb5e69727bb41.28471955
Published
25.10.2018
Bulletin of Bryansk state technical university
ASSESSMENT EXPERIMENTS ON FATIGUE RESISTANCE OF STRUCTURAL MATERIALS AND MACHINERY
Volume, issue
2018 № 8 Published
Authors
Vladimir Kapralov , Aleksandr Osipov , Ngok Nguen
DOI
https://doi.org/10.30987/article_5bb5e6a564b678.09621023
Published
25.10.2018
Bulletin of Bryansk state technical university
MACHINE OPERATING UNIT IMPROVEMENT BASED ON SCREW ROTORS
Volume, issue
2018 № 9 Published
Authors
Georgy Serga , Kirill Belokur , Eduard Hvostik
DOI
https://doi.org/10.30987/article_5bd17b452ab289.28134044
Published
06.11.2018
Bulletin of Bryansk state technical university
THERMODYNAMIC STRENGTHENING OF HARD ALLOY DRAWING TOOL
Volume, issue
2018 № 9 Published
Authors
K. Marusich , Maksim Shabaev
DOI
https://doi.org/10.30987/article_5bd17b40240fd6.04527323
Published
06.11.2018
Bulletin of Bryansk state technical university
PECULIARITIES OF CUTTING MODE OPTIMIZATION TAKING INTO ACCOUNT RANDOM FACTOR
Volume, issue
2018 № 9 Published
Authors
Aleksandr Ancev , Nikolay Pas'ko
DOI
https://doi.org/10.30987/article_5bd17b459c1d00.72079190
Published
06.11.2018
Bulletin of Bryansk state technical university
BASIC CHARACTERISTICS CONTROL OF METALS HAVING EFFECT OF SHAPE MEMORY
Volume, issue
2018 № 9 Published
Authors
Dinara Has'yanova
DOI
https://doi.org/10.30987/article_5bd17b46171547.62900571
Published
06.11.2018
Bulletin of Bryansk state technical university
INTER-METALLIDE COATING STRUCTURE AFTER THERMO-CYCLING
Volume, issue
2018 № 9 Published
Authors
Sergey Himuhin , Kseniya Eremina , Ernst Ri , Hosen Ri
DOI
https://doi.org/10.30987/article_5bd17b46967cb0.41264280
Published
06.11.2018
Bulletin of Bryansk state technical university
DEVELOPMENT OF DOCTRINE ON CONTACT STIFFNESS AND ENGINEERING OF MACHINERY SURFACE
Volume, issue
2018 № 11 Published
Authors
Anatoliy Suslov
DOI
https://doi.org/10.30987/article_5be14a244adca8.76566258
Published
17.12.2018
Bulletin of Bryansk state technical university
MACHINERY WEAR-RESISTANCE INCREASE BY COMBINED ELECTRO-MECHANICAL TREATMENT
Volume, issue
2018 № 11 Published
Authors
Aleksandr Gorlenko , Mikhail Shevtsov
DOI
https://doi.org/10.30987/article_5be14a250b8231.19036686
Published
17.12.2018
Bulletin of Bryansk state technical university
SURFACE LAYER ROUGHNESS IN OPTICAL PRODUCTS AFTER DIAMOND MICRO-TURNING
Volume, issue
2018 № 11 Published
Authors
Vitaliy Burykin , Artem Naydenko
DOI
https://doi.org/10.30987/article_5be14a261366e7.69019105
Published
17.12.2018
Bulletin of Bryansk state technical university
ROUGHNESS OF PARTS SURFACES WITH SPUTTERED AMORPHOUS CRYSTALLINE COATINGS IRON BASED WORKED BY TOOLS WITH PSCBN
Volume, issue
2018 № 11 Published
Authors
Yuriy Mel'niychuk , Sergey Klimenko
DOI
https://doi.org/10.30987/article_5be14a2a502052.96444344
Published
17.12.2018
Bulletin of Bryansk state technical university
TOPOHRAPHY AND AREA OF WORN CYBORG END FLANK AT HARDENED STEEL SHH15 FINISH TURNING
Volume, issue
2018 № 11 Published
Authors
Sergey Klimenko , Marina Kopeykina , Aleksandr Manovickiy
DOI
https://doi.org/10.30987/article_5be14a2cf15269.77721998
Published
17.12.2018
Bulletin of Bryansk state technical university
FINITE ELEMENT MODEL USE FOR SOLUTION OF CONTACT PROBLEMS TAKING INTO ACCOUNT ROUGHNESS OF SOLID SURFACES
Volume, issue
2018 № 11 Published
Authors
Vladimir Sakalo , Aleksandr Ol'shevskiy
DOI
https://doi.org/10.30987/article_5be14a2f880092.17128502
Published
17.12.2018
Bulletin of Bryansk state technical university
FUNDAMENTALS OF IRON-CARBON ALLOY WEAR-RESISTANCE IN-CREASE AT CORROSION-MECHANICAL WEAR
Volume, issue
2018 № 11 Published
Authors
Evgeniy Pamfilov , Galina Pilyushina , Vladimir Kapustin
DOI
https://doi.org/10.30987/article_5be14a33a4b107.67349403
Published
17.12.2018
Bulletin of Bryansk state technical university
COG-WHEEL GRINDING WITH ABRASIVE CUBIC BORON NITRIDE DISKS
Volume, issue
2018 № 11 Published
Authors
Sergey Ryabchenko
DOI
https://doi.org/10.30987/article_5be14a35530b65.64215370
Published
17.12.2018
Bulletin of Bryansk state technical university
MODELING OF WAVE DEFORMATION LOADING OF ALUMINUM-MAGNESIUM ALLOYS
Volume, issue
2018 № 11 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.30987/article_5be14a37776568.49924300
Published
17.12.2018
Bulletin of Bryansk state technical university
ELASTIC CONTACT MODELING OF SOLIDS WITH STANDARD MICRORELIEF
Volume, issue
2018 № 11 Published
Authors
Irina Goryacheva , Ivan Cukanov
DOI
https://doi.org/10.30987/article_5be14a3a619314.04367914
Published
17.12.2018
Bulletin of Bryansk state technical university
SUBSTANTIATION OF CHOICE OF ENGINEERING PRODUCE QUALITY INDICES AT ADOPTED STRATEGIES OF STAGE REALIZATION OF THEIR LIFE CYCLE
Volume, issue
2018 № 10 Published
Authors
Evgeniy Ivahnenko , Igor' Zotov , Leonid Chervyakov
DOI
https://doi.org/10.30987/article_5bf3cb4d183e11.06361598
Published
16.12.2018
Bulletin of Bryansk state technical university
TOOL DESIGN PECULIARITIES FOR MILLING
Volume, issue
2018 № 10 Published
Authors
Mikhail Kulikov , Dmitriy Volkov
DOI
https://doi.org/10.30987/article_5bf3cb4d677621.74489692
Published
16.12.2018
Bulletin of Bryansk state technical university
OPTIMIZATION OF AUTOMATED WINDING TECHNOLOGY USING NC MACHINES
Volume, issue
2018 № 10 Published
Authors
Rahim Nahushev , Astemir Shevhuzhev , Daniza Atabaeva , Vitaliy Solodilov
DOI
https://doi.org/10.30987/article_5bf3cb4dbfae69.76028868
Published
16.12.2018
Bulletin of Bryansk state technical university
GENERAL SYSTEM PROPERTIES AND PROCESS INDICES
Volume, issue
2018 № 12 Published
Authors
Rimma Sindeeva , Igor' V. Zotov , Leonid Chervyakov , Alan Zhilyaev
DOI
https://doi.org/10.30987/article_5c0f8089609aa4.12565021
Published
18.12.2018
Bulletin of Bryansk state technical university
TRIBOLOGY DEVELOPMENT
Volume, issue
2018 № 12 Published
Authors
Tikhomirov Viktor , Vladimir Grib
DOI
https://doi.org/10.30987/article_5c0f8089a49ae4.92243541
Published
18.12.2018
Bulletin of Bryansk state technical university
INVESTIGATION OF METAL AND ALLOY ELECTRONIC STRUCTURE IMPACT UPON ELECTROCHEMICAL CORROSION
Volume, issue
2018 № 12 Published
Authors
Andrey Bazarkin , Elena Samoylova
DOI
https://doi.org/10.30987/article_5c0f808a003d83.60526858
Published
18.12.2018
Bulletin of Bryansk state technical university
COMPUTATION OF SURFACE ROUGHNESS PARAMETERS FOR TECHNOLOGICAL SUPPORT
Volume, issue
2018 № 12 Published
Authors
Viktor Hohlov
DOI
https://doi.org/10.30987/article_5c0f808a60fdc8.36126307
Published
18.12.2018
Bulletin of Bryansk state technical university
TECHNOLOGY FOR PARTS FORMATION USING 3D MODELING AND 3D SCANNING AND DEVELOPMENT OF SYSTEM FOR QUALITY PREDICTION OF PARTS OBTAINED THROUGH 3D PRINTING
Volume, issue
2018 № 12 Published
Authors
Dmitriy Levyy , Nina Lakalina
DOI
https://doi.org/10.30987/article_5c0f808c2d56d6.67600899
Published
18.12.2018
Bulletin of Bryansk state technical university
IMPROVEMENT OF TECHNOLOGY AND EQUIPMENT FOR PLASTIC PRODUCT MACHINING
Volume, issue
2018 № 12 Published
Authors
Alexandr Khandozhko , Andrey Shcherbakov , Leonid Zakharov
DOI
https://doi.org/10.30987/article_5c0f975532f039.91247226
Published
18.12.2018
Bulletin of Bryansk state technical university
THEORETICAL INTERRELATION ASCERTAINMENT OF WEAR-RESISTANCE AND FATIGUE STRENGTH WITH CONDITIONS OF ELECTRO-EROSION TREATMENT
Volume, issue
2018 № 12 Published
Authors
Sergey Siyanov , Alina Papikyan
DOI
https://doi.org/10.30987/article_5c0f808d952152.60216179
Published
18.12.2018
Bulletin of Bryansk state technical university
STANDARDIZATION OF GEOMETRICAL ACCURACY IN MECHANICAL ENGINEERING
Volume, issue
2019 № 1 Published
Authors
Aleksandr Shitikov , Sergey Safonov , Anatoliy Totay , Aleksandr Reutov
DOI
https://doi.org/10.30987/article_5c3db112387d77.78198093
Published
30.01.2019
Bulletin of Bryansk state technical university
EXAMPLE OF ASSESSMENT PROCEDURE REALIZATION OF PRODUCTION SYSTEMS ON “SIGNAL-NOISE” CRITERION AT MANUFACTURING HARD-ALLOY BORON-MILLERS
Volume, issue
2019 № 1 Published
Authors
Viktor Protasyev , Elena Plahotnikova , Vladislav Istockiy
DOI
https://doi.org/10.30987/article_5c4ed0208e0f88.10904907
Published
30.01.2019
Bulletin of Bryansk state technical university
SCIENCE-INTENSIVE PRODUCT QUALITY CONTROL ON TEST RESULTS
Volume, issue
2019 № 1 Published
Authors
Vladislav Smolencev , Sergey Safonov , Boris Omigov
DOI
https://doi.org/10.30987/article_5c4ed021555b86.14857920
Published
30.01.2019
Bulletin of Bryansk state technical university
EFFICIENT CHOICE OF METHOD FOR PARTS REDUCTION BY METHOD OF MANUAL ARC WELD SURFACING OF WEAR-RESISTANT LAYER
Volume, issue
2019 № 2 Published
Authors
Konstantin Makarenko , Aleksey Zabelin , Denis Savinov
DOI
https://doi.org/10.30987/article_5c6526329f04d1.88928912
Published
28.02.2019
Bulletin of Bryansk state technical university
INVESTIGATION OF STRESS-STRAIN AND TRIBOLOGICAL PROPERTIES OF COMPOSITE COATINGS ARMORED WITH QUASI-CRYSTALLINE AND OBTAINED THROUGH METHOD OF COLD GAS-DYNAMIC SPUTTERING
Volume, issue
2019 № 2 Published
Authors
Ol'ga Sil'chenko , Marina Siluyanova
DOI
https://doi.org/10.30987/article_5c652632e022e2.16320051
Published
28.02.2019
Bulletin of Bryansk state technical university
DYNAMIC STIFFNESS IMPACT OF PROCESSING ROBOT UPON PARTS WORKED SURFACE QUALITY
Volume, issue
2019 № 2 Published
Authors
V. Butenko , Irina Davydova , Tat'yana Atoyan
DOI
https://doi.org/10.30987/article_5c652633282411.11499278
Published
28.02.2019
Bulletin of Bryansk state technical university
INVESTIGATION OF WHITE ALLOYED CAST IRON DUCTILITY
Volume, issue
2019 № 2 Published
Authors
Valeriy Soldatov , Dmitriy A. Ilyushkin , Oleg Petrakov
DOI
https://doi.org/10.30987/article_5c652633961a58.10645526
Published
28.02.2019
Bulletin of Bryansk state technical university
REGULATIONS OF ROUGHNESS PARAMETERS FOR MACHINERY FUNCTIONAL SURFACES IN TECHNOLOGICAL DOCUMENTATION
Volume, issue
2019 № 3 Published
Authors
Maksim Nagorkin , Vladimir Fedorov , Igor Pyrikov , Mihail Toporkov
DOI
https://doi.org/10.30987/article_5c8b5ce9c06c31.07069800
Published
27.03.2019
Bulletin of Bryansk state technical university
ANALYTICAL APPROACH TO TECHNOLOGICAL SUPPORT OF FATIGUE LIMIT
Volume, issue
2019 № 3 Published
Authors
Anatoliy Totay
DOI
https://doi.org/10.30987/article_5c8b5cea063335.55319966
Published
27.03.2019
Bulletin of Bryansk state technical university
IMPROVING THE USEFUL ACTION COEFFICIENT TEETH GRIPPING
Volume, issue
2019 № 3 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.30987/article_5c8b5cea652887.12624786
Published
27.03.2019
Bulletin of Bryansk state technical university
STRUCTURAL SYNTHESIS OF SELF-ALIGNING GEARS OF INDUSTRIAL ROBOTS WITH PARALLEL KINEMATICS
Volume, issue
2019 № 4 Published
Authors
Andrey Tolstosheev , Vyacheslav Tatarincev
DOI
https://doi.org/10.30987/article_5cb58f4ed2c444.85435034
Published
29.04.2019
Bulletin of Bryansk state technical university
WORKING CAPACITY TECHNOLOGICAL SUPPORT OF HEAVY DUTY PARTS AND PRODUCTION TOOLING ELEMENTS
Volume, issue
2019 № 4 Published
Authors
Vladimir Naduvaev , Evgeniy Frolov
DOI
https://doi.org/10.30987/article_5cb58f4f1c9411.57562109
Published
29.04.2019
Bulletin of Bryansk state technical university
RELIABILITY TECHNOLOGICAL SUPPORT OF FRICTION UNIT PARTS OF SCIENCE INTENSIVE ASSEMBLY UNITS
Volume, issue
2019 № 4 Published
Authors
Evgeniy Pol'skiy , Sergey Sorokin
DOI
https://doi.org/10.30987/article_5cb58f4f589ff6.30206728
Published
29.04.2019
Bulletin of Bryansk state technical university
AUTOMATED SYSTEM FOR SURFACE PARALLELISM CONTROL IN PRISMATIC PARTS
Volume, issue
2019 № 4 Published
Authors
Sergey S'yanov , Al'bertovna A. Kovaleva
DOI
https://doi.org/10.30987/article_5cb58f4fa49635.83995054
Published
29.04.2019
Bulletin of Bryansk state technical university
MODELS OF PHYSICALLY SHORT AND MACROSCOPIC CRACK DEVELOPMENT AND THEIR APPLICATION FOR TIN BASED BABBIT
Volume, issue
2019 № 5 Published
Authors
Mikhail Zernin
DOI
https://doi.org/10.30987/article_5cda64cc1934b2.58791459
Published
30.05.2019
Bulletin of Bryansk state technical university
DYNAMOMETER CHOICE FOR CUTTING FORCE MEASUREMENT AT END MILLING
Volume, issue
2019 № 5 Published
Authors
Boris Ponomarev , Shi Nguen
DOI
https://doi.org/10.30987/article_5cda64cc611ed4.66880449
Published
30.05.2019
Bulletin of Bryansk state technical university
INVESTIGATION OF HOLE CYLINDRICAL SURFACE FORMATION PROCESS AT STRATEGY OF FINISH MILLING BY END-MILLING CUTTERS WITH CIRCULAR INTERPOLATION
Volume, issue
2019 № 5 Published
Authors
Vladimir Davydov , Vadim Stel'makov , Aleksandr Sarygin
DOI
https://doi.org/10.30987/article_5cda64ccacc191.62932806
Published
30.05.2019
Bulletin of Bryansk state technical university
SPHERICAL ROLLER GEAR WITH DOUBLE-ROW PINION: POWER COMPUTATIONS AND PERFORMANCE COMPUTATION
Volume, issue
2019 № 5 Published
Authors
Mihail Lustenkov , :Ekaterina Lustenkova
DOI
https://doi.org/10.30987/article_5cda64cd19bec2.74771159
Published
30.05.2019
Bulletin of Bryansk state technical university
STRUCTURE FORMATION OF Α-FE THIN SURFACE LAYER WITH GLOW DISCHARGE PLASMA
Volume, issue
2019 № 5 Published
Authors
Vladimir Logvin , Irina Tereshko , Sergey Sheptunov
DOI
https://doi.org/10.30987/article_5cda64cd74fc24.33017288
Published
30.05.2019
Bulletin of Bryansk state technical university
DEFINITION OF IMPROVEMENT STRATEGIC DIRECTIONS USING TOOLS OF QUALITY CONTROL
Volume, issue
2019 № 5 Published
Authors
Nikolay Borbac' , Tat'yana Shkolina
DOI
https://doi.org/10.30987/article_5cda64cdc9fb50.58848430
Published
30.05.2019
Bulletin of Bryansk state technical university
APPLICATION OF FINISH-STRENGTHENING PROCESS WITH DIAMOND SMOOTHING FOR BEARING CAPACITY INCREASE OF JOINTS WITH TIGHTNESS
Volume, issue
2019 № 6 Published
Authors
Sergey Shishkin
DOI
https://doi.org/10.30987/article_5d10851eda9a19.64369355
Published
27.06.2019
Bulletin of Bryansk state technical university
BLADE PARTS COMBINED PROCESSING AT HIGH-SPEED ROTOR DEVELOPMENT
Volume, issue
2019 № 6 Published
Authors
Vasiliy Sokol'nikov , Gennadiy Suhochev
DOI
https://doi.org/10.30987/article_5d10851f00a262.78462947
Published
27.06.2019
Bulletin of Bryansk state technical university
INVESTIGATION OF PHYSICAL PHENOMENA OCCURRED IN CONTACT AREA OF BULK PARTICLES AT THEIR MOTION IN SCREW DRUMS BY METHODS OF SIMILARITY THEORY, ENGINEERING AND COMPUTER GRAPHICS
Volume, issue
2019 № 6 Published
Authors
Georgiy Serga , Dmitriy Seryy , Aleksey Marchenko
DOI
https://doi.org/10.30987/article_5d10851f18f085.56011612
Published
27.06.2019
Bulletin of Bryansk state technical university
CALCULATION OF MULTI-BLADE CUTTING TOOL RELIABILITY
Volume, issue
2019 № 6 Published
Authors
Aleksandr Ancev
DOI
https://doi.org/10.30987/article_5d10851f338ed8.53056430
Published
27.06.2019
Bulletin of Bryansk state technical university
ANALYSIS OF TOOL OSCILLATION FOR CASES OF SINGLE-CUTTER PROCESSING AND WITH CUTTERS OPPOSITE LOCATION
Volume, issue
2019 № 6 Published
Authors
Evgeniy Pashkov , Andrey Vozhzhov
DOI
https://doi.org/10.30987/article_5d10851f4b6017.67446520
Published
27.06.2019
Bulletin of Bryansk state technical university
PECULIARITIES IN ROUGHNESS FORMATION OF CONJUGATE CYLINDRICAL AND END SURFACES OF PARTS AT GRINDING WITH ONE TOOL
Volume, issue
2019 № 6 Published
Authors
Sergey Bishutin , Alla Kozlenkova
DOI
https://doi.org/10.30987/article_5d10851f643d17.66485210
Published
27.06.2019
Bulletin of Bryansk state technical university
DEVELOPMENT OF PIPE WELDING TECHNOLOGY WITH PULSE ARC FITTINGS BY TUNGSTEN ELECTRODE IN ARGON ENVIRONMENT
Volume, issue
2019 № 6 Published
Authors
Aleksandr Komarov , Aleksandr Vdovin , Aleksey Zabelin , Aleksandr Tereschenko
DOI
https://doi.org/10.30987/article_5d10851f7fa876.86658404
Published
27.06.2019
Bulletin of Bryansk state technical university
REINFORCED COMPOSITE SLIDING BEARINGS
Volume, issue
2019 № 6 Published
Authors
Galina Pilyushina , Evgeniy Pamfilov , Elena Sheveleva
DOI
https://doi.org/10.30987/article_5d10851f9915c2.59892204
Published
27.06.2019
Bulletin of Bryansk state technical university
FINISH-STRENGTHENING EFFECTIVENESS INCREASE BASED ON USE OF SCREW ROTORS WITH WAVE SURFACE ON PERIMETER
Volume, issue
2019 № 7 Published
Authors
Valeriy Lebedev , Georgiy Serga
DOI
https://doi.org/10.30987/article_5d2d92312d1863.53149771
Published
29.07.2019
Bulletin of Bryansk state technical university
PORTABLE MACHINE MODULE FOR PROCESSING WORN WEDGE GROOVES OF ROLLING-STOCK BOGIE FRAME WITH LASER BASING
Volume, issue
2019 № 7 Published
Authors
Yuriy Kopylov , Mihail Biryukov
DOI
https://doi.org/10.30987/article_5d2d92314cad88.91490543
Published
29.07.2019
Bulletin of Bryansk state technical university
MACHINERY LIFE AS CONTINUOUS FLOW OF TECHNOLOGIES
Volume, issue
2019 № 7 Published
Authors
Stanislav Kas'yanov , Tatyana Karlova
DOI
https://doi.org/10.30987/article_5d2d92316db571.89344762
Published
29.07.2019
Bulletin of Bryansk state technical university
DESIGN OF ROUGH HOBBING CUTTER FOR MACHINING OF COG-WHEEL OF LARGE MODULE
Volume, issue
2019 № 7 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.30987/article_5d2d92319a8d00.64590625
Published
29.07.2019
Bulletin of Bryansk state technical university
DEFINITION OF THERMAL DISPLACEMENTS IN SHAPING OF MANUFACTURING EQUIPMENT UNITS
Volume, issue
2019 № 7 Published
Authors
Sergey Ivannikov , Igor' Manaenkov , Artem Opalnitskiy , Alexandr Shurpo
DOI
https://doi.org/10.30987/article_5d2d9231bc8960.93315126
Published
29.07.2019
Bulletin of Bryansk state technical university
DYNAMICS OF REINFORCED COMPOSITE PANEL WITH MONO-LAYER COMBINED STACKING WITH INNER DAMAGES AT NON-STATIONARY IMPACTS
Volume, issue
2019 № 7 Published
Authors
Aleksandr Medvedskiy , Mihail Martirosov , Anton Homchenko
DOI
https://doi.org/10.30987/article_5d2d9231dd5853.89951988
Published
29.07.2019
Bulletin of Bryansk state technical university
ASSESSMENT OF GERM CRITICAL DIMENSION AND CONDITIONS OF TITANIUM CARBIDE CRYSTALLINE PHASE GROWTH DURING SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
Volume, issue
2019 № 7 Published
Authors
Al'fiya Luc , Evgeniy Amosov , Yuliya Mahonina
DOI
https://doi.org/10.30987/article_5d2d92320dcdb4.93177041
Published
29.07.2019
Bulletin of Bryansk state technical university
ADDITIVE-SUBTRACTIVE TECHNOLOGIES – EFFECTIVE TRANSITION TO INNOVATION PRODUCTION
Volume, issue
2019 № 8 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.30987/article_5d6cbe42004700.14416796
Published
30.08.2019
Bulletin of Bryansk state technical university
SYSTEM DEVELOPMENT FOR DEFINITION OF CONTACT INTERACTION MODE IN LINK OF SLIDING ROBOT WITH OBSTACLE
Volume, issue
2019 № 8 Published
Authors
Lyudmila Vorochaeva , Sergey Savin , Andrey Yacun
DOI
https://doi.org/10.30987/article_5d6cbe42247be1.64247013
Published
30.08.2019
Bulletin of Bryansk state technical university
INCREASE OF EFFECTIVENESS AND TECHNOLOGICAL POTENTIALITIES OF FINISHING-STRENGTHENING
Volume, issue
2019 № 8 Published
Authors
Valeriy Lebedev , Georgiy Serga
DOI
https://doi.org/10.30987/article_5d6cbe42464335.74212016
Published
30.08.2019
Bulletin of Bryansk state technical university
ADAPTIVE POTENTIALITIES OF HYDRO-MECHANICAL COUPLING WITH DIFFERENTIAL DRIVING GEAR
Volume, issue
2019 № 8 Published
Authors
Marina Borodina
DOI
https://doi.org/10.30987/article_5d6cbe4266e561.67995491
Published
30.08.2019
Bulletin of Bryansk state technical university
USE OF SURFACING MATERIALS MODIFIED WITH REFRACTORY COMPONENTS FOR REDUCTION OF ROLLERS IN BLANK CONTINUOUS CASTING MACHINES
Volume, issue
2019 № 8 Published
Authors
Aleksey Makarov , Aleksandr Kudryashov , Aleksandr Vladimirov , Anna Titova
DOI
https://doi.org/10.30987/article_5d6cbe428ab026.77335497
Published
30.08.2019
Bulletin of Bryansk state technical university
SIMULATION OF METAL TRANSFER BETWEEN CYLINDRICAL ELECTRODES AT ELECTROSPARK ALLOYING
Volume, issue
2019 № 8 Published
Authors
Sergey Pyachin , Oleg Kaminskiy , Aleksandr Belya , Bori Mokrickiy
DOI
https://doi.org/10.30987/article_5d6cbe42af6c79.15380930
Published
30.08.2019
Bulletin of Bryansk state technical university
PRASEODYMIUM IMPACT UPON TEMPERATURE DEPENDENCE OF SPECIFIC HEAT AND THERMODYNAMIC FUNCTION CHANGES OF ALUMINUM ALLOY AZH2.18
Volume, issue
2019 № 8 Published
Authors
Ne'mat Esanov , Izatullo Ganiev , Abduvohid Hakimov
DOI
https://doi.org/10.30987/article_5d6cbe42d90f67.65063641
Published
30.08.2019
Bulletin of Bryansk state technical university
APPLICABILITY ANALYSIS OF STRESS STATE CRITERIA FOR DESCRIPTION OF BABBIT LAYER FATIGUE DESTRUCTION IN SLIDER BEARINGS
Volume, issue
2019 № 9 Published
Authors
Mikhail Zernin
DOI
https://doi.org/10.30987/article_5d9317b223f295.08713337
Published
30.09.2019
Bulletin of Bryansk state technical university
EXPERIMENTAL DEFINITION OF BASING ACCURACY AND TOOL FASTENING
Volume, issue
2019 № 9 Published
Authors
Ol'ga Kazakova , Lana Gasparova
DOI
https://doi.org/10.30987/article_5d9317b24f2524.52540627
Published
30.09.2019
Bulletin of Bryansk state technical university
THEORETICAL ANALYTICAL SOLUTION OF PROBLEM ON STATIONARY SUBCRITICAL CURRENT OF GASEOUS HEAT CARRIER IN PIPING BIFURCATIONS OF HEAT-EXCHANGE EQUIPMENT
Volume, issue
2019 № 9 Published
Authors
Igor' Lobanov
DOI
https://doi.org/10.30987/article_5d9317b27868a4.78923465
Published
30.09.2019
Bulletin of Bryansk state technical university
INVESTIGATION OF OUTPUT PARAMETER CORRELATION OF CUTTING ENGINEERING PROCESS WITH MASS HARD-ALLOY REPLACEABLE METAL CUTTING PLATES
Volume, issue
2019 № 9 Published
Authors
Boris Mokritskiy , Tat'yana Usova , Ol'ga Shakirova , Gennadiy Usanov
DOI
https://doi.org/10.30987/article_5d9317b2a4fae2.02370100
Published
30.09.2019
Bulletin of Bryansk state technical university
CHOICE OF SUPPORTING ELEMENTS AT WIRE SURFACING IN ADDITIVE TECHNOLOGIES
Volume, issue
2019 № 9 Published
Authors
Dmitriy Repnikov , Maksim Terehov
DOI
https://doi.org/10.30987/article_5d9317b2d07d48.72815741
Published
30.09.2019
Bulletin of Bryansk state technical university
ADHESION STRENGTH INVESTIGATION OF FILM ANTIFRICTION COATINGS
Volume, issue
2019 № 10 Published
Authors
Alexey Kirichek
DOI
https://doi.org/10.30987/article_5db95e857a4e02.22596904
Published
31.10.2019
Bulletin of Bryansk state technical university
DESIGN AND COMPUTATION OF THERMOMECHANICAL NUTRUNNER FOR LARGE DIAMETER THREAD TIGHTENING
Volume, issue
2019 № 10 Published
Authors
Sergey Shishkin
DOI
https://doi.org/10.30987/article_5db95e858ffc15.80299278
Published
31.10.2019
Bulletin of Bryansk state technical university
COMBINING OF MATERIAL STRAIN PROCESSING METHODS
Volume, issue
2019 № 10 Published
Authors
Afanasiy Ivanov
DOI
https://doi.org/10.30987/article_5db95e85a4a413.79050731
Published
31.10.2019
Bulletin of Bryansk state technical university
IMPACT OF ENVIRONMENT PROCESSED UPON EFFECTIVENESS OF SHOCK PULSE ENERGY TRANSFER AT WAVE DEFORMATION STRENGTHENING
Volume, issue
2019 № 11 Published
Authors
Andrey Kirichek , Sergey Barinov , Aleksandr Yashin , Aleksey Zaycev , Aleksandr Konstantinov
DOI
https://doi.org/10.30987/1999-8775-2019-2019-11-13-18
Published
29.11.2019
Bulletin of Bryansk state technical university
SIMULATION MODEL OF PAD ELECTRIC-ARC LAYER GROWTH OF
Volume, issue
2019 № 11 Published
Authors
Maksim Kuznecov , Maksim Krampit , Artem Kryukov , Dmitriy Il'yaschenko , Aleksandr Nepomnyaschiy
DOI
https://doi.org/10.30987/1999-8775-2019-2019-11-19-26
Published
29.11.2019
Bulletin of Bryansk state technical university
RESIDUAL STRESS DISTRIBUTION DURING WELDING UNDER CONDITIONS OF LOW CLIMATIC TEERATURES
Volume, issue
2019 № 11 Published
Authors
Yuriy Saraev , Nikolay Golikov , Mihail Sidorov
DOI
https://doi.org/10.30987/1999-8775-2019-2019-11-4-12
Published
29.11.2019
Bulletin of Bryansk state technical university
DEVELOPMENT OF THE CLASSIFICATION OF SCREW SIEVES
Volume, issue
2019 № 11 Published
Authors
Georgiy Serga , Aleksandr Sekisov , Sofiya Gubieva
DOI
https://doi.org/10.30987/1999-8775-2019-2019-11-27-37
Published
29.11.2019
Bulletin of Bryansk state technical university
IMPACT OF CORRUGATION AND ROUGHNESS OF SURFACE UPON NORMAL CONTACT STIFFNESS OF FLAT JOINT
Volume, issue
2019 № 12 (85) Published
Authors
Victor Tikhomirov , Mikhail Izmerov
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-4-12
Published
24.12.2019
Bulletin of Bryansk state technical university
ABRASIVE DISC IMPREGNATION
Volume, issue
2019 № 12 (85) Published
Authors
Liana Gusakova
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-13-20
Published
24.12.2019
Bulletin of Bryansk state technical university
DYNAMICS OF VIBRATION-PROOF SYSTEMS WITH CONTROLLED MECHANISM OF CONNECTION IMPOSITION
Volume, issue
2019 № 12 (85) Published
Authors
Ol'ga Fominova , Leonid Savin , Vladimir Chernyshev
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-21-32
Published
24.12.2019
Bulletin of Bryansk state technical university
CUTTING OUTPUT PARAMETER EFFECTIVENESS CONTROL BASED ON ANALYSIS OF MASS-DIMENSIONAL PARAMETERS OF REPLACEABLE HARD-ALLOY PLATES
Volume, issue
2019 № 12 (85) Published
Authors
Bori Mokrickiy , Dmitriy Savin , Yana Konyuhova , Dmitriy Antipin
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-33-41
Published
24.12.2019
Bulletin of Bryansk state technical university
THEORETICAL INVESTIGATION OF UNITS GEOMETRICAL ACCURACY IMPACT OF PROCESSING EQUIPMENT WITH HYBRID LAYOUT UPON ADDITIVE SHAPING ERROR
Volume, issue
2019 № 12 (85) Published
Authors
Aleksandr Grechuhin , Vadim Kuc , Aleksey Oleshickiy
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-42-49
Published
24.12.2019
Bulletin of Bryansk state technical university
TEST BENCH FOR INVESTIGATION OF WAVE DEFORMATION STRENGTHENING PROCESSES
Volume, issue
2019 № 12 (85) Published
Authors
Andrey Kirichek , Sergey Barinov , Sergey Silantiev , Aleksandr Yashin , Aleksandr Konstantinov
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-50-57
Published
24.12.2019
Bulletin of Bryansk state technical university
PROPERTIES RESEARCH OF ALUMINUM HYDROXIDE POWDER OBTAINED THROUGH CHEMICAL DISPERSION OF ALLOY V95 SCRAP
Volume, issue
2019 № 12 (85) Published
Authors
Anatolyi Shlyapin , Dmitriy Nechaev , Asif Omarov , Nikolay Ivanov , Tat'yana Skakova
DOI
https://doi.org/10.30987/1999-8775-2019-2019-12-58-61
Published
24.12.2019
Bulletin of Bryansk state technical university
REAL PRODUCT SIZE ACCOUNTING PROBLEM AT WAVE DEFORMATION HARDENING
Volume, issue
2020 № 1 (86) Published
Authors
Andrey Kirichek , Sergey Barinov , Aleksandr Yashin , Aleksey Zaycev , Aleksandr Konstantinov
DOI
https://doi.org/10.30987/1999-8775-2020-2020-1-4-10
Published
23.01.2020
Bulletin of Bryansk state technical university
STRUCTURE AND PROPERTIES OF COATINGS ON PRODUCTS MADE OF STEEL 09G2S, STEEL 3 AND STEEL 12H18N10T
Volume, issue
2020 № 1 (86) Published
Authors
Yuriy Saraev , Valeriy Bezborodov , Marina Perovskaya , Vyacheslav Semenchuk
DOI
https://doi.org/10.30987/1999-8775-2020-2020-1-11-17
Published
23.01.2020
Bulletin of Bryansk state technical university
PHYSICAL-MATHEMATICAL MODEL OF BENDING FIBER-OPTIC SENSOR OF FORCE
Volume, issue
2020 № 1 (86) Published
Authors
Irina Shilova
DOI
https://doi.org/10.30987/1999-8775-2020-2020-1-18-27
Published
23.01.2020
Bulletin of Bryansk state technical university
BASIC FUNDAMENTALS TO ENSURE AND INCREASE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS
Volume, issue
2020 № 2 (87) Published
Authors
Anatoliy Suslov , Oleg Fedonin , Dmitriy Petreshin
DOI
https://doi.org/10.30987/1999-8775-2020-2020-2-4-10
Published
22.02.2020
Bulletin of Bryansk state technical university
PRODUCT QUALITY AT DESIGN STAGE
Volume, issue
2020 № 2 (87) Published
Authors
Victor Tikhomirov , Mikhail Izmerov , Mikhail Shalygin
DOI
https://doi.org/10.30987/1999-8775-2020-2020-2-11-18
Published
22.02.2020
Bulletin of Bryansk state technical university
MACHINERY QUALITY SUPPORT BASED ON IMPRUVEMENT OF METHODS AND MEANS FOR ESTIMATE OF TRIBO-TECHNICAL PARAMETERS OF MACHINERY FUNCTIONAL UNITS
Volume, issue
2020 № 2 (87) Published
Authors
Galina Pilyushina , Evgeniy Pamfilov , Pavel Pyrikov , Vladimir Kapustin
DOI
https://doi.org/10.30987/1999-8775-2020-2020-2-19-27
Published
22.02.2020
Bulletin of Bryansk state technical university
SIMULATOR FOR ROUGHNESS MEASUREMENT WITH SPHERICAL PROBE
Volume, issue
2020 № 2 (87) Published
Authors
Andrey Troshin , Oleg Zaharov
DOI
https://doi.org/10.30987/1999-8775-2020-2020-2-28-33
Published
22.02.2020
Bulletin of Bryansk state technical university
MATING SURFACES MACHINING IN CROSSED CHANNELS
Volume, issue
2020 № 3 (88) Published
Authors
Oleg Kirillov , Vladislav Smolencev , Evgeniy Kotukov
DOI
https://doi.org/10.30987/1999-8775-2020-3-4-10
Published
24.03.2020
Bulletin of Bryansk state technical university
INDUCTION METHOD FOR PARAMETER INVESTIGATIONS OF DISPERSION FERROMAGNETICS
Volume, issue
2020 № 4 (89) Published
Authors
Yuriy Vernigorov , Valeriy Lebedev , Kirill Leletko , Kochubey Anatoliy Anatol'evich Anatoliy , Georgy Demin
DOI
https://doi.org/10.30987/1999-8775-2020-4-4-10
Published
19.04.2020
Bulletin of Bryansk state technical university
INFLUENCE OF FORCE OF INERTIA ON COATING CLUTCH WITH EXTERNAL SURFACE OF ROTATION BODIES WHEN COATING
Volume, issue
2020 № 5 (90) Published
Authors
Aleksey Rodichev , Andrey Gorin , Mariya Tokmakova , Aleksey Kirichek
DOI
https://doi.org/10.30987/1999-8775-2020-5-4-10
Published
16.05.2020
Bulletin of Bryansk state technical university
EQUIPMENT FOR GRINDING-FINISHING BASED ON SCREW ROTORS
Volume, issue
2020 № 5 (90) Published
Authors
Aleksandr Sekisov , Georgiy Serga
DOI
https://doi.org/10.30987/1999-8775-2020-5-11-22
Published
16.05.2020
Bulletin of Bryansk state technical university
INFORMATION-MEASURING COMPLEX FOR INVESTIGATION OF MELTING AND ELECTRODE METAL TRANSFER AT ARC WELDING
Volume, issue
2020 № 6 (91) Published
Authors
Sergey Bolotov , Aleksandr Homchenko , Aleksandr Shul'ga , Evgeniya Bolotova
DOI
https://doi.org/10.30987/1999-8775-2020-6-4-11
Published
23.06.2020
Bulletin of Bryansk state technical university
CALCULATION OF CONTROLLED TIGHTENING EFFORT IN GROUP BOLTED JOINT
Volume, issue
2020 № 6 (91) Published
Authors
Ruslan Guchinskiy
DOI
https://doi.org/10.30987/1999-8775-2020-6-12-21
Published
23.06.2020
Bulletin of Bryansk state technical university
INVESTIGATIONS OF DENSITY AND POROSITY OF COATINGS MADE OF CERAMIC-POLYMERIC OR COMPOSITES WITH QUASI-CRYSTALS OBTAINED WITH GAS-DETONATION METHOD AND METHOD OF GAS-DYNAMIC SPUTTERING
Volume, issue
2020 № 7 (92) Published
Authors
Ol'ga Sil'chenko , Marina Siluyanova , Petr Hopin
DOI
https://doi.org/10.30987/1999-8775-2020-7-4-11
Published
15.07.2020
Bulletin of Bryansk state technical university
TO CALCULATION OF ELLIPTIC CRUSHER WITH FORM MEMORY EFFECT
Volume, issue
2020 № 7 (92) Published
Authors
Sergey Shishkin
DOI
https://doi.org/10.30987/1999-8775-2020-7-12-19
Published
15.07.2020
Bulletin of Bryansk state technical university
OUTLOOKS IN SURFACE PLASTIC DEFORMATION USE TO DECREASE SURFACE ROUGHNESS IN ROLLING MILL PARTS STRENGTHENED WITH SVS-ELECTRODE MATERIALS
Volume, issue
2020 № 8 (93) Published
Authors
Aleksey Makarov , Anna Titova , A. Afonin , Alexander Kudryashov , Aleksandr Vladimirov
DOI
https://doi.org/10.30987/1999-8775-2020-8-4-12
Published
12.08.2020
Bulletin of Bryansk state technical university
IMPROVEMENT OF ELASTIC SLEEVE-PIN CLUTCH DESIGN
Volume, issue
2020 № 8 (93) Published
Authors
Nataliya Savel'eva , Iakov Savelev
DOI
https://doi.org/10.30987/1999-8775-2020-8-13-17
Published
12.08.2020
Bulletin of Bryansk state technical university
IMPACT OF WELD DEPOSITION MODES UPON CHARACTERISTICS OF ELECTRODE METAL HEAT AND MASS TRANSFER, FORMATION OF STRUCTURE AND SURFACE PROPERTIES
Volume, issue
2020 № 9 (94) Published
Authors
Yuriy Saraev , Valeriy Bezborodov , Marina Perovskaya , Vyacheslav Semenchuk , Aleksandr Nepomnyaschiy
DOI
https://doi.org/10.30987/1999-8775-2020-9-4-12
Published
22.09.2020
Bulletin of Bryansk state technical university
MACHINERY OPERATIONAL PROPERTY CONTROL DURING DIAMOND-ABRASIVE FINISHING USING ACTIVE SOTS
Volume, issue
2020 № 9 (94) Published
Authors
Yuriy Ryzhov , Svetlana Abramova
DOI
https://doi.org/10.30987/1999-8775-2020-9-13-18
Published
22.09.2020
Bulletin of Bryansk state technical university
SCHROEDINGER EQUATION USE FOR INVESTIGATIONS OF PHENOMENA TAKING PLACE IN PLASMA GENERATOR OF GLOW DISCHARGE
Volume, issue
2020 № 9 (94) Published
Authors
Sergey Sheptunov , Vladimir Logvin , Lyudmila Uvarova , Tatyana Karlova
DOI
https://doi.org/10.30987/1999-8775-2020-9-19-28
Published
22.09.2020
Bulletin of Bryansk state technical university
MAGNETIC FIELD IMPACT UPON TRIBOTECHNICAL CHARACTERISTICS OF PERMANENT CONNECTIONS IN RELATION TO FRICTION SHOCK ABSORBERS
Volume, issue
2020 № 10 (95) Published
Authors
Victor Tikhomirov , Aleksandr Gorlenko , Stanislav Volohov , Mikhail Izmerov
DOI
https://doi.org/10.30987/1999-8775-2020-10-4-11
Published
30.10.2020
Bulletin of Bryansk state technical university
TRANSFER PROCESSES IN DISPERSION SYSTEMS AND NANO-SYSTEMS CONTAINING SPHERICAL AND CYLINDRICAL PARTICLES
Volume, issue
2020 № 10 (95) Published
Authors
Lyudmila Uvarova , Irina Krivenko , Marina Smirnova , Sergey Sheptunov , Tatyana Karlova , Aleksandr Bekmeshov
DOI
https://doi.org/10.30987/1999-8775-2020-10-12-21
Published
30.10.2020
Bulletin of Bryansk state technical university
INVESTIGATION OF DEPENDENCE IMPACT OF TOOL GEOMETRICAL PARAMETERS AND CUTTING SPEED UPON SHAPING EFFORT AT HELICAL GROOVE CUTTING ON INTERNAL SURFACE OF CYLINDRICAL SHELL
Volume, issue
2020 № 10 (95) Published
Authors
Vadim Kuc , Dmitriy Gridin
DOI
https://doi.org/10.30987/1999-8775-2020-10-22-28
Published
30.10.2020
Bulletin of Bryansk state technical university
MICRO-HARDNESS AND WEAR-RESISTANCE INVESTIGATION IN CARBO-METAL COATING COMPOSITES OBTAINED THROUGH GAS-DETONATION METHOD
Volume, issue
2020 № 10 (95) Published
Authors
Ol'ga Sil'chenko , Marina Siluyanova , Petr Hopin
DOI
https://doi.org/10.30987/1999-8775-2020-10-29-36
Published
30.10.2020
Bulletin of Bryansk state technical university
MAGNETIC FIELD IMPACT UPON TRIBOTECHNICAL CHARACTERISTICS OF SLIDING FRICTION PAIRS WITH RESPECT TO FRICTION SHOCK ABSORBERS
Volume, issue
2020 № 11 (96) Published
Authors
Victor Tikhomirov , Aleksandr Gorlenko , Stanislav Volohov , Mikhail Izmerov
DOI
https://doi.org/10.30987/1999-8775-2020-11-4-11
Published
18.11.2020
Bulletin of Bryansk state technical university
RELIABILITY INCREASE OF THREAD CUTTING WITH TAP BORERS IN SUPER-SMALL HOLES
Volume, issue
2020 № 11 (96) Published
Authors
Mikhail Kulikov , Maksim Yagodkin , Yuriy Kulikov
DOI
https://doi.org/10.30987/1999-8775-2020-11-12-17
Published
18.11.2020
Bulletin of Bryansk state technical university
MULTICHOICE APPROACH TO SOLUTION OF OPTIMIZATION PROBLEMS OF ALGORITHMIC DESCRIPTION FORMATION OF PROCESSING ROUTES
Volume, issue
2020 № 11 (96) Published
Authors
Aleksandr Popov , Anna Zapol'skaya , Tat'yana Popova
DOI
https://doi.org/10.30987/1999-8775-2020-11-18-25
Published
18.11.2020
Bulletin of Bryansk state technical university
INVESTIGATION OF COMBINED METHOD USE FOR COPPER AND ALUMINUM ALLOY PROCESSING
Volume, issue
2020 № 11 (96) Published
Authors
Vitaliy Inozemtsev
DOI
https://doi.org/10.30987/1999-8775-2020-11-26-35
Published
18.11.2020
Bulletin of Bryansk state technical university
ELECTROSPARK COATING PROCESSING WITH METHOD OF ULTRASONIC PLASTIC DEFORMATION
Volume, issue
2020 № 11 (96) Published
Authors
Sergey Himuhin , Kseniya Eremina , Gennadiy Dzyuba
DOI
https://doi.org/10.30987/1999-8775-2020-11-36-43
Published
18.11.2020
Bulletin of Bryansk state technical university
ENTERPRISE SUBSYSTEMS INTERACTION UNDER PURPOSEFUL CONTROL OF PRODUCT QUALITY
Volume, issue
2020 № 11 (96) Published
Authors
Alexandr Ivahnenko , O. Anikeeva
DOI
https://doi.org/10.30987/1999-8775-2020-11-44-51
Published
18.11.2020
Bulletin of Bryansk state technical university
QUALITY SUPPORT OF PARTS MANUFACTURED BY MEANS OF ADDITIVE TECHNOLOGIES
Volume, issue
2020 № 12 (97) Published
Authors
Mikhail Kulikov , Maksim Larionov , Denis Gusev , Evgeniy Shevchuk
DOI
https://doi.org/10.30987/1999-8775-2020-12-4-10
Published
11.12.2020
Bulletin of Bryansk state technical university
STRENGTH PROPERTIES INVESTIGATION OF COMPOSITE COATINGS WITH QUASI-CRYSTALS OBTAINED THROUGH METHODS OF GAS DYNAMIC SPUTTERING
Volume, issue
2020 № 12 (97) Published
Authors
Ol'ga Sil'chenko , Marina Siluyanova , Petr Hopin
DOI
https://doi.org/10.30987/1999-8775-2020-12-11-18
Published
11.12.2020
Bulletin of Bryansk state technical university
IMPACT OF INTERLAMINAR ELLIPTICAL DEFECTS UPON BEHAVIOR OF RECTANGULAR CARBON PLASTIC PLATE AT STATIC AND DYNAMIC LOADS
Volume, issue
2020 № 12 (97) Published
Authors
Aleksandr Medvedskiy , Mihail Martirosov , Anton Homchenko , Darina Dedova
DOI
https://doi.org/10.30987/1999-8775-2020-12-19-30
Published
11.12.2020
Bulletin of Bryansk state technical university
MONITORING OF AUTOMATED TECHNOLOGICAL ENVIRONMENT FOR TOOL WORKING IN PLASMA-GENERATOR OF GLOW DISCHARGE BASED ON NEURONET APPROACH
Volume, issue
2020 № 12 (97) Published
Authors
Vladimir Logvin , Tatyana Karlova
DOI
https://doi.org/10.30987/1999-8775-2020-12-31-37
Published
11.12.2020
Bulletin of Bryansk state technical university
OPERATION CONDITIONS IMPACT OF SUBMERSIBLE PUMP EQUIPMENT UPON ITS WORKING CAPACITY
Volume, issue
2020 № 12 (97) Published
Authors
Dmitriy Tarasov
DOI
https://doi.org/10.30987/1999-8775-2020-12-38-48
Published
11.12.2020
Bulletin of Bryansk state technical university
DIAGNOSTICS OF ENGINEERING CUTTING SYSTEM USING CUTTING FORCE PARAMETERS
Volume, issue
2020 № 12 (97) Published
Authors
Bori Mokrickiy , Dmitriy Antipin
DOI
https://doi.org/10.30987/1999-8775-2020-12-49-57
Published
11.12.2020
Bulletin of Bryansk state technical university
INTERACTION OF SPATIAL OSCILLATION WITH ROUGHNESS OF SURFACE WORKED BY EXAMPLE OF TURNING
Volume, issue
2021 № 1 (98) Published
Authors
Vladimir Schetinin , Pavel Sablin
DOI
https://doi.org/10.30987/1999-8775-2021-1-4-9
Published
29.01.2021
Bulletin of Bryansk state technical university
PECULIARITIES IN TUNGSTEN ALLOY PARTS PROCESSING FOR OIL-GAS INDUSTRY
Volume, issue
2021 № 1 (98) Published
Authors
Maksim Terehov , Dmitriy Sevost'yanov , Lyudmila Filippova
DOI
https://doi.org/10.30987/1999-8775-2021-1-10-18
Published
29.01.2021
Bulletin of Bryansk state technical university
AUTOMATED EFFECTIVENESS CONTROL SYSTEM OF TOOL HOUSE FOR TOOL STRENGTHENING IN GLOW DISCHARGE
Volume, issue
2021 № 1 (98) Published
Authors
Vladimir Logvin , Tatyana Karlova
DOI
https://doi.org/10.30987/1999-8775-2021-1-19-27
Published
29.01.2021
Bulletin of Bryansk state technical university
MATERIAL MODELS AT RESEARCH OF WAVE DEFORMATION STRENGTHENING THROUGH FINITE ELEMENT METHOD
Volume, issue
2021 № 1 (98) Published
Authors
Andrey Kirichek , Sergey Barinov , Sergey Silantiev , Aleksandr Yashin , Aleksey Zaycev
DOI
https://doi.org/10.30987/1999-8775-2021-1-28-33
Published
29.01.2021
Bulletin of Bryansk state technical university
INVESTIGATION OF BULK MATERIAL MOTION IN SPIRAL SIEVES
Volume, issue
2021 № 2 (99) Published
Authors
Evgeniya Belokur , Aleksandr Sekisov , Georgiy Serga
DOI
https://doi.org/10.30987/1999-8775-2021-2-4-12
Published
20.02.2021
Bulletin of Bryansk state technical university
COMPOSITE USE IN NOSE CONE DESIGNING FOR AIRCRAFTS
Volume, issue
2021 № 2 (99) Published
Authors
Ruslan Nesterenko , Aleksandr Magdin , Dmitriy Kudryavcev , Danagul' Zhanzakova
DOI
https://doi.org/10.30987/1999-8775-2021-2-13-20
Published
20.02.2021
Bulletin of Bryansk state technical university
IMPACT OF MATERIAL AND DIMENSIONS OF PRODUCT UPON PARAMETERS OF WAVE DEFORMATION STRENGTHENING
Volume, issue
2021 № 2 (99) Published
Authors
Andrey Kirichek , Sergey Barinov , Aleksandr Yashin , Lyubov' Nikitina , Aleksandr Konstantinov
DOI
https://doi.org/10.30987/1999-8775-2021-2-21-27
Published
20.02.2021
Bulletin of Bryansk state technical university
REALIZATION OF MULTI-STAGE MODEL OF BABBIT FATIGUE DAMAGES AND BABBIT ANTI-FRICTION LAYERS
Volume, issue
2021 № 3 (100) Published
Authors
Mikhail Zernin , Nikolay Rybkin , Ivan Emel'yanov , Aleksey Matyuhin
DOI
https://doi.org/10.30987/1999-8775-2021-3-4-15
Published
25.03.2021
Bulletin of Bryansk state technical university
AUTOMATED SYSTEM FOR QUALITY CONTROL OF TOOL PROCESSING IN GLOW DISCHARGE BASED ON NEURAL NETWORK MONITORING
Volume, issue
2021 № 3 (100) Published
Authors
Vladimir Logvin , Tatyana Karlova
DOI
https://doi.org/10.30987/1999-8775-2021-3-16-24
Published
25.03.2021
Bulletin of Bryansk state technical university
FUINDAMENTALS DEVELOPMENT FOR COMPUTATION OF SCREW SCREENS FOR BULK MATERIAL SEPARATION AND EXPERIENCE OF THEIR INTRODUCTION TO PRODUCTION
Volume, issue
2021 № 4 (101) Published
Authors
Aleksandr Sekisov , Evgeniya Belokur , Georgiy Serga
DOI
https://doi.org/10.30987/1999-8775-2021-4-4-17
Published
24.04.2021
Bulletin of Bryansk state technical university
CHOICE OF ALLOY, COATING AND GEOMETRICAL PARAMETERS OF CUTTER PLATE FOR FACE MILLING OF HIGH-CARBON HARDENED 95H18-SH STEEL
Volume, issue
2021 № 4 (101) Published
Authors
Igor' Sedinin , Vladimir Makarov
DOI
https://doi.org/10.30987/1999-8775-2021-4-18-27
Published
24.04.2021
Bulletin of Bryansk state technical university
RESEARCH OF MELT PROCESSING IMPACT WITH ELECTROMAGNETIC PULSES UPON SILUMIN WEAR-RESISTANCE
Volume, issue
2021 № 4 (101) Published
Authors
Stanislav Dorofeev , Aleksandr Voynov , Aleksey Goncharov , Nadezhda Slavinskaya , Kirill Doroshenko
DOI
https://doi.org/10.30987/1999-8775-2021-4-28-35
Published
24.04.2021
Bulletin of Bryansk state technical university
COMPLEX APPROACH METHODOLOGY AT DESIGNING VENTILATING EQUIPMENT WITH HEAT RECUPERATOR FOR ENTERPRISES OF ENGINEERING INDUSTRY
Volume, issue
2021 № 5 (102) Published
Authors
Sergey Galyuzhin , Olga Lobikova
DOI
https://doi.org/10.30987/1999-8775-2021-5-4-14
Published
27.05.2021
Bulletin of Bryansk state technical university
TECHNOLOGICAL CAPACITY UPDATING OF CONTINUOUS RUN-IN GEAR GRINDING METHOD
Volume, issue
2021 № 5 (102) Published
Authors
Natal'ya Vorozhcova , Vladimir Makarov , Aleksandr Gorbunov , Elena Kolganova
DOI
https://doi.org/10.30987/1999-8775-2021-5-15-22
Published
27.05.2021
Bulletin of Bryansk state technical university
RADIAL STIFFNESS ANISOTROPY OF BODY BORING FOR LATHE SPINDLE BEARINGS
Volume, issue
2021 № 5 (102) Published
Authors
Aleksandr Denisenko , Mihail Yakimov , Kseniya Borisova
DOI
https://doi.org/10.30987/1999-8775-2021-5-23-31
Published
27.05.2021
Bulletin of Bryansk state technical university
SWIVEL JOINT WEAR-RESISTANCE INCREASE OF PROCESSING MACHINE MANIPULATORS
Volume, issue
2021 № 5 (102) Published
Authors
Vladimir Kapustin , Evgeniy Pamfilov , Elena Sheveleva , Galina Pilyushina
DOI
https://doi.org/10.30987/1999-8775-2021-5-32-39
Published
27.05.2021
Bulletin of Bryansk state technical university
MILLING EFFECTIVENESS INCREASE BY MEANS OF HARD-ALLOY COMPOUND END MILLING CUTTERS
Volume, issue
2021 № 6 (103) Published
Authors
Bori Mokrickiy , Dmitriy Antipin , Vladislav Vereschagin
DOI
https://doi.org/10.30987/1999-8775-2021-6-4-10
Published
23.06.2021
Bulletin of Bryansk state technical university
VIBRATORY ACTIVITY INVESTIGATION OF GRINDING MACHINE ELECTRIC SPINDLES
Volume, issue
2021 № 6 (103) Published
Authors
Erik Gasparov , Lana Gasparova , Gevorg Markosyan
DOI
https://doi.org/10.30987/1999-8775-2021-6-23-29
Published
23.06.2021
Bulletin of Bryansk state technical university
TECHNOLOGICAL DESIGNING NC LATHES BASED ON REGIONAL MACHINERY AND DEVICE DATA BANK
Volume, issue
2021 № 6 (103) Published
Authors
Vyacheslav Epifanov
DOI
https://doi.org/10.30987/1999-8775-2021-6-30-35
Published
23.06.2021
Bulletin of Bryansk state technical university
IMPROVEMENT OF METHODICAL SUPPORT IN OPERATION SETUP OF UNIVERSAL MACHINE-TOOLS AT MOTOR CAR REPAIR COMPANIES
Volume, issue
2021 № 6 (103) Published
Authors
Andrey Fot , Vladimir Rassoha , Evgeniy Pen'kov
DOI
https://doi.org/10.30987/1999-8775-2021-6-36-46
Published
23.06.2021
Bulletin of Bryansk state technical university
QUALITATIVE INDEX ASSURANCE FOR PARTS MACHINED WITH IMPREGNATED ABRASIVE TOOL
Volume, issue
2021 № 7 (104) Published
Authors
Viktor Butenko , Liana Gusakova , Dmitry Durov , Yury Petukhov
DOI
https://doi.org/10.30987/1999-8775-2021-7-4-11
Published
30.07.2021
Bulletin of Bryansk state technical university
SURFACE ROUGHNESS IMPROVEMENT OF PARTS MADE OF POLYMERIC MATERIALS OBTAINED BY MEANS OF ADDITIVE TECHNOLOGIES
Volume, issue
2021 № 7 (104) Published
Authors
Mikhail Kulikov , Maksim Larionov , Denis Gusev , Evgeniy Shevchuk
DOI
https://doi.org/10.30987/1999-8775-2021-7-12-18
Published
30.07.2021
Bulletin of Bryansk state technical university
TOOTH LEG EXCESSIVE UNDERCUT ELIMINATION IN HELICAL CYLINDRICAL GEARS WITH PROTUBERANCE OF HOBBING CUTTER BASED ON GRAPHIC RUN-IN
Volume, issue
2021 № 7 (104) Published
Authors
Damir Safarov , Aleksey Kondrashov , Ayrat Fashudtinov
DOI
https://doi.org/10.30987/1999-8775-2021-7-19-27
Published
30.07.2021
Bulletin of Bryansk state technical university
INVESTIGATIONS OF TECHNOLOGICAL PARAMETERS IMPACT UPON QUALITY FORMATION IN SURFACE LAYER OF PARTS AT CENTRIFUGAL ROTARY PROCESSING
Volume, issue
2021 № 8 (105) Published
Authors
Mihail Tamarkin , Elina Tischenko , Van Nguen , Aleksey Mordovcev
DOI
https://doi.org/10.30987/1999-8775-2021-8-4-13
Published
30.08.2021
Bulletin of Bryansk state technical university
AUTOMATION OF CONTROL PROCESS TO ENSURE TOOL QUALITY DURING FINISHING WITH GLOW DISCHARGE PLASMA
Volume, issue
2021 № 8 (105) Published
Authors
Vladimir Logvin , Tatyana Karlova
DOI
https://doi.org/10.30987/1999-8775-2021-8-14-21
Published
30.08.2021
Bulletin of Bryansk state technical university
MODE INFLUENCE OF SELECTIVE LASER IMPACT UPON POROSITY OF SAMPLES OF COBALT, CHROMIUM AND MOLYBDENUM POWDERS
Volume, issue
2021 № 8 (105) Published
Authors
Natal'ya Saprykina , Aleksandr Saprykin , Yury Sharkeev , Egor Ibragimov , Margarita Himich
DOI
https://doi.org/10.30987/1999-8775-2021-8-22-28
Published
30.08.2021
Bulletin of Bryansk state technical university
FORMATION BY MECHANICAL ALLOYING TI-AL COATINGS WITH COBALT AND NICKEL ADDITIVES
Volume, issue
2021 № 8 (105) Published
Authors
Sergey Pyachin , Nuriya Vlasova , Mariya Kulik , Valeriya Krutikova
DOI
https://doi.org/10.30987/1999-8775-2021-8-29-37
Published
30.08.2021
Bulletin of Bryansk state technical university
STAND OF SYSTEMS AND MEANS OF AUTOMATION OF EQUIPMENT REFUELING OF PETROLEUM RESERVOIRS
Volume, issue
2021 № 8 (105) Published
Authors
Vitaliy Matlakhov , Viktor Khandozhko
DOI
https://doi.org/10.30987/1999-8775-2021-8-38-45
Published
30.08.2021
Bulletin of Bryansk state technical university
DETERMINATION OF THE DIMENSIONAL AND TOPOLOGICAL PARAMETERS OF THE GRAPHITE PHASE IN CAST IRON BY FRACTAL ANALYSIS OF IMAGES OF ITS MICROSTRUCTURE
Volume, issue
2021 № 9 (106) Published
Authors
Konstantin Makarenko , Anatoliy Poddubnyy , Sergey Glushenok , Ekaterina Zencova
DOI
https://doi.org/10.30987/1999-8775-2021-9-4-14
Published
30.09.2021
Bulletin of Bryansk state technical university
FINE GRIT TREATMENT OF RANGY PLATES
Volume, issue
2021 № 9 (106) Published
Authors
Vladimir Scriabin
DOI
https://doi.org/10.30987/1999-8775-2021-9-15-22
Published
30.09.2021
Bulletin of Bryansk state technical university
CONTROL AND MONITORING OF FUSION WELDING BY WAY OF EXAMPLE OF MANUFACTURING AIRCRAFT AIR CONDITIONING SYSTEMS ELEMENTS
Volume, issue
2021 № 9 (106) Published
Authors
Vladislav Merkulov , Stanislav Lazarev
DOI
https://doi.org/10.30987/1999-8775-2021-9-23-28
Published
30.09.2021
Bulletin of Bryansk state technical university
CIRCUITRY , STRUCTURE AND PROPERTIES OF HETEROGENEOUS MATERIALS
Volume, issue
2021 № 9 (106) Published
Authors
Dmitriy Kryukov , Aleksey Krivenkov , Sergey Chugunov
DOI
https://doi.org/10.30987/1999-8775-2021-9-29-35
Published
30.09.2021
Bulletin of Bryansk state technical university
ARRANGEMENT OF ENGINEERING MODELING OF TECHNOLOGICAL SYSTEMS FOR SOLVING PRODUCTION TASKS OF DIVERSE COMPLEXITY
Volume, issue
2021 № 10 (107) Published
Authors
Damir Safarov , Aleksey Kondrashov , Ayrat Fashudtinov
DOI
https://doi.org/10.30987/1999-8775-2021-10-4-12
Published
29.10.2021
Bulletin of Bryansk state technical university
IMPROVING THE EFFICIENCY OF MILLING HOLES WITH A SMALL-SIZED TOOL IN THE CONDITIONS OF AUTOMATED PRODUCTION
Volume, issue
2021 № 10 (107) Published
Authors
Vladimir Davydov , Aleksandr Nikitenko , Mihail Gimadeev , Vera Berkun
DOI
https://doi.org/10.30987/1999-8775-2021-10-13-21
Published
29.10.2021
Bulletin of Bryansk state technical university
APPLICATION OF ELECTRICAL TECHNOLOGIES FOR THE RESTORATION OF AGRICULTURAL MACHINERY PARTS
Volume, issue
2021 № 10 (107) Published
Authors
Ol'ga Shirobokova , Yuriy Kisel' , Dmitriy Bezik
DOI
https://doi.org/10.30987/1999-8775-2021-10-22-26
Published
29.10.2021
Bulletin of Bryansk state technical university
DEVELOPMENT OF ALGORITHM FOR AUTOMATED ASSESSMENT OF THE TIGHTNESS OF CONTACT SEALING CONNECTIONS OF ISOLATION VALVES
Volume, issue
2021 № 10 (107) Published
Authors
Aslan Tatarkanov , Islam Aleksandrov , Maksim Mihaylov , Aleksandr Muranov
DOI
https://doi.org/10.30987/1999-8775-2021-10-27-37
Published
29.10.2021
Bulletin of Bryansk state technical university
SIMULATION OF DOOR MOVEMENT WITH A CLOSING MECHANISM
Volume, issue
2021 № 11 (108) Published
Authors
Aleksandr Reutov
DOI
https://doi.org/10.30987/1999-8775-2021-11-4-10
Published
30.11.2021
Bulletin of Bryansk state technical university
EVALUATION OF SURFACE DEFECTS OF PRODUCTS USING DIGITAL TECHNOLOGIES
Volume, issue
2021 № 11 (108) Published
Authors
Natal'ya Antonova , Elena Haustova
DOI
https://doi.org/10.30987/1999-8775-2021-11-11-19
Published
30.11.2021
Bulletin of Bryansk state technical university
THEORETICAL MATHEMATICAL MODELING OF HEAT EXCHANGE IN PIPES WITH TRIANGULAR AND SQUARE TURBULATORS WITH D/D=0.95÷0.90, T/D=0.25÷1.00 AND HIGH REYNOLDS NUMBERS RE=106
Volume, issue
2021 № 11 (108) Published
Authors
Igor' Lobanov
DOI
https://doi.org/10.30987/1999-8775-2021-11-20-35
Published
30.11.2021
Bulletin of Bryansk state technical university
METHODOLOGICAL FOUNDATIONS OF DIAGNOSTICS OF METALWORKING TECHNOLOGICAL SYSTEMS ACCORDING TO PARAMETRIC RELIABILITY OF ENSURING A GIVEN QUALITY OF THE TREATED SURFACES
Volume, issue
2021 № 11 (108) Published
Authors
Vladimir Fedorov , Maksim Nagorkin , Leonid Vayner
DOI
https://doi.org/10.30987/1999-8775-2021-11-36-50
Published
30.11.2021
Bulletin of Bryansk state technical university
ENSURING TIGHTNESS IN PRESSURE COUPLING PARTS
Volume, issue
2021 № 11 (108) Published
Authors
Nikolay Kurnosov , Aleksandr Tarnopol'skiy , Yuliya Nakashidze
DOI
https://doi.org/10.30987/1999-8775-2021-11-51-59
Published
30.11.2021
Bulletin of Bryansk state technical university
THE COATING INFLUENCE OF PARTS MADE OF NON-FERROUS METALS AND ALLOYS ON THEIR WEAR RESISTANCE
Volume, issue
2021 № 12 (109) Published
Authors
Vladimir Scriabin
DOI
https://doi.org/10.30987/1999-8775-2021-12-12-18
Published
20.12.2021
Bulletin of Bryansk state technical university
IMPROVING THE TRIBOTECHNICAL CHARACTERISTICS OF THE LUBRICANT INTENDED FOR LUBRICATING THE WHEEL FLANGE OF THE MAINLINE LOCOMOTIVE
Volume, issue
2021 № 12 (109) Published
Authors
Mikhail Shalygin , Anna Vashchishina
DOI
https://doi.org/10.30987/1999-8775-2021-12-19-25
Published
20.12.2021
Bulletin of Bryansk state technical university
TRIBOLOGICAL PARAMETERS AND STRUCTURAL CHARACTERISTICS OF COATINGS MADE OF CERAMIC POLYMERS OR COMPOSITE MATERIALS REINFORCED WITH QUASICRYSTALS AND CARBON NANOTUBES, OBTAINED BY HIGH-SPEED ION-PLASMA MAGNETRON SPUTTERING
Volume, issue
2021 № 12 (109) Published
Authors
Ol'ga Sil'chenko
DOI
https://doi.org/10.30987/1999-8775-2021-12-26-36
Published
20.12.2021
Bulletin of Bryansk state technical university
COMPREHENSIVE ANALYSIS OF THE PARTS SURFACE LAYER AFTER DIAMOND SMOOTHING
Volume, issue
2021 № 12 (109) Published
Authors
Anatoliy Totay
DOI
https://doi.org/10.30987/1999-8775-2021-12-37-47
Published
20.12.2021
Bulletin of Bryansk state technical university
ENERGY EFFICIENCY INCREASE OF ROTARY PUMP BY CONVERGENCY INTRODUCTION OF WHEEL INTER-BLADE CANAL
Volume, issue
2016 № 4 Published
Authors
Boris Borovskiy
DOI
https://doi.org/10.12737/23174
Published
28.12.2016
Bulletin of Bryansk state technical university
REASONS FOR THE CHOICE OF THE THERMAL PIPE FOR THE COMPLEX COOLING SYSTEM OF THE COMBINED CUTTING TOOLS
Volume, issue
2017 № 1 Published
Authors
Dubrov Yuriy , Aleksandr N. Chukarin , Dubrov Dmitriy , Prikhodko Gennadiy
DOI
https://doi.org/10.12737/24882
Published
31.03.2017
Bulletin of Bryansk state technical university
DEPENDENCE OF THE MEAN AND DISPERSION OF GRAIN WIDTH OF SILICON CARBIDE BLACK GRINDING POWDERS ON THE MESH SIZE OF A PASS SIEVE
Volume, issue
2016 № 5 Published
Authors
Vladimir Nosenko , Aleksey A. Aleksandrov
DOI
https://doi.org/10.12737/article_58f9c4d9ecb004.36348769
Published
30.12.2016
Bulletin of Bryansk state technical university
OPTIMIZATION OF AVIATION COMPLEX ERGONOMICS CHARACTERISTICS THROUGH METHOD OF SIMULATION INVESTIGATIONS OF AIRCRAFT SYSTEMS
Volume, issue
2017 № 2 Published
Authors
Ponomarenko Andrey , Vasilets Valeriy , Levin Dmitriy
DOI
https://doi.org/10.12737/article_59353e294e4892.44003396
Published
30.06.2017
Bulletin of Bryansk state technical university
EFFICIENT ORGANIZATION ALGORITHMS OF INTERCONNECTIONS OF ELASTIC AND HYDRODYNAMIC CONSTITUENTS OF FINITE ELEMENT SIMULATION OF FRICTION UNIT ELASTIC HYDRODYNAMICS
Volume, issue
2017 № 5 Published
Authors
Mikhail Zernin , Nikolay Rybkin
DOI
https://doi.org/10.12737/article_59b11cba23e7a6.86663670
Published
04.10.2017
Bulletin of Bryansk state technical university
DESIGN OF MECHANICAL BROACH PARTS FOR AIRCRAFTS IN SOLIDWORKS SYSTEM
Volume, issue
2019 № 2 Published
Authors
Galina Hotina , Stanislav Freylehman , Svetlana Leonova
DOI
https://doi.org/10.30987/article_5c3db10fe52006.23084696
Published
28.02.2019
Bulletin of Bryansk state technical university
PERIODIC SOLUTIONS PROBLEM OF HETEROGENEOUS STRING FORCED OSCILLATIONS EQUATION WITH BOUNDARY CONDITION OF THE THIRD TYPE
Volume, issue
2016 № 4 Published
Authors
Igor Rudakov
DOI
https://doi.org/10.12737/23183
Published
28.12.2016
Bulletin of Bryansk state technical university
COMPUTATION OF PRESSURE AND TEMPERATURE FIELDS IN LUBRICATING LAYER OF TAPERED HYDROSTATIC DYNAMIC BEARINGS
Volume, issue
2017 № 1 Published
Authors
Korneev Andrey , S. Li
DOI
https://doi.org/10.12737/24884
Published
31.03.2017
Bulletin of Bryansk state technical university
DESIGNING OF A COMBINED TOOL FOR COMPLEX SURFACE MACHINING
Volume, issue
2016 № 5 Published
Authors
Alexander Suvorov , Alexey Kuzovkin
DOI
https://doi.org/10.12737/article_58f9c4da3a9653.72695813
Published
30.12.2016
Bulletin of Bryansk state technical university
INVESTIGATIONS OF CUTTING OPERATION PROCESS RESULTS ON BASIS OF MODELING USING SOFTWARE ENVIRONMENT
Volume, issue
2017 № 2 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.12737/article_59353e29743f65.13333985
Published
30.06.2017
Bulletin of Bryansk state technical university
TEMPERATURE IMPACT OF SPINDLE UNIT BEARING UPON ITS STIFFNESS
Volume, issue
2017 № 5 Published
Authors
A. Denisenko , Mihail V. Yakimov
DOI
https://doi.org/10.12737/article_59b11cba898b73.82363010
Published
04.10.2017
Bulletin of Bryansk state technical university
CHOICE OF NECLEUS FUNCTION FOR PROBLEM COMPUITATION OF STEEL MOTION IN LIQUID PHASE IN VESSEL WITH OPEN WALL THROUGH SPH METHOD
Volume, issue
2016 № 4 Published
Authors
Maksim Guryanov , Aleksey Kozhukhov
DOI
https://doi.org/10.12737/23186
Published
28.12.2016
Bulletin of Bryansk state technical university
INCREASE OF ENDURANCE AND WORKING CAPACITY OF STRUCTURAL STEEL BY ADDITIONAL CHEMICAL-THERMAL TREATMENT USING NITROGENOUS-CARBONIC CARBURIZERS
Volume, issue
2017 № 1 Published
Authors
Ignatenko Nikolay , Sergey Kovalev , Filonovich Aleksandr , V. Gadalov , Vornacheva Irina
DOI
https://doi.org/10.12737/24886
Published
31.03.2017
Bulletin of Bryansk state technical university
PRODUCTION RISKS AND PROSPECTS IN USE OF LASER WELDING AT MANUFACTURING LARGE DIAMETER PIPES
Volume, issue
2017 № 2 Published
Authors
Aleksandr M. Semencev
DOI
https://doi.org/10.12737/article_59353e29791d58.62855993
Published
30.06.2017
Bulletin of Bryansk state technical university
DEVICES FOR SAMPLE FASTENING DURING EXPERIMENTAL INVESTIGATIONS
Volume, issue
2017 № 5 Published
Authors
Nikolay D. Feofilov , Evgeniy S. Yanov , Aleksandr Yamnikov
DOI
https://doi.org/10.12737/article_59b11cb86cfa41.94680975
Published
04.10.2017
Bulletin of Bryansk state technical university
SOLUTION OF PROBLEMS OF CURVED SURFACE APPROXIMATION BY LAYERS WITH CONSTANT AND VARIABLE CROSS-SECTIONS AT SHAPING WITH ADDITIVE METHODS
Volume, issue
2019 № 3 Published
Authors
Aleksandr Grechuhin , Vadim Kuc , Mihail Razumov
DOI
https://doi.org/10.30987/article_5c3db110b7f0c1.06560615
Published
27.03.2019
Bulletin of Bryansk state technical university
EFFECT RESEARCH OF SURFACE DEFORMATION IMPACT AND THERMAL TREATMENT AT MULTI-LAYER WELD DEPOSITION UPON MECHANICAL PROPERTIES AND POROSITY OF ALUMINUM ALLOY 1580
Volume, issue
2020 № 6 (91) Published
Authors
Maksim Kartashev , Dmitriy Panov , Maksim Mindibaev , Gleb Permyakov , Dmitriy Trushnikov
DOI
https://doi.org/10.30987/1999-8775-2020-6-22-30
Published
23.06.2020
Bulletin of Bryansk state technical university
MODELING OF BILATERAL END-FINISHING KINEMATIC CHARACTERISTICS
Volume, issue
2020 № 7 (92) Published
Authors
Leonid Vayner
DOI
https://doi.org/10.30987/1999-8775-2020-7-20-26
Published
15.07.2020
Bulletin of Bryansk state technical university
PRINCIPLES OF FORMATION AND DESIGNING EQUIPMENT FOR FINISHING PARTS ON SCREW ROTOR BASIS
Volume, issue
2020 № 8 (93) Published
Authors
Aleksandr Sekisov , Georgiy Serga
DOI
https://doi.org/10.30987/1999-8775-2020-8-18-27
Published
12.08.2020
Bulletin of Bryansk state technical university
NEW APPROACHES TO DESIGNING VIBRATORY TECHNOLOGICAL TECHNIQUE IN FOOD AND PROCESSING INDUSTRY
Volume, issue
2016 № 4 Published
Authors
Elena Mishchenko , Vladimir Mishchenko
DOI
https://doi.org/10.12737/23190
Published
28.12.2016
Bulletin of Bryansk state technical university
STRUCTURAL ANALYSIS OF ROBOT MACHINE MECHANISMS WITH PARALLEL KINEMATICS
Volume, issue
2017 № 1 Published
Authors
Tolstosheev Andrey , Vyacheslav Tatarincev
DOI
https://doi.org/10.12737/24889
Published
31.03.2017
Bulletin of Bryansk state technical university
FUZZY DESCRIPTION AND CHOICE OF DESIGN CONCEPT
Volume, issue
2017 № 2 Published
Authors
Aleksandr Reutov
DOI
https://doi.org/10.12737/article_59353e297d5205.11729580
Published
30.06.2017
Bulletin of Bryansk state technical university
CUTTING EDGE ANALYTICAL DESCRIPTION OF REPLACEABLE INDEXABLE INSERTS OF COMPOUND FORM CUTTERS
Volume, issue
2017 № 5 Published
Authors
Svetlana Hodyrevskaya , Aleksandr A. Gorohov , Ol'ga G. Kuc , Yuliya Malneva
DOI
https://doi.org/10.12737/article_59b11cb7aa8348.27043858
Published
04.10.2017
Bulletin of Bryansk state technical university
INVESTIGATION OF CONTACT AREA AT STEEL C12M CUTTING BY MINERAL-CERAMICS VOK-71
Volume, issue
2019 № 3 Published
Authors
Larisa Sekletina , Aleksandr Yanyushkin , Viktor Gartfel'der , Andrey Yanyushkin
DOI
https://doi.org/10.30987/article_5c3db1111d2999.48755991
Published
27.03.2019
Bulletin of Bryansk state technical university
FRACTURE MECHANISM OF 09G2S LOW-ALLOY STEEL WELDED SAMPLE SUBJECTED TO HEAT TREATMENT AND EQUAL CHANNEL ANGULAR PRESSING DURING IMPACT BENDING
Volume, issue
2020 № 8 (93) Published
Authors
Afanasiy Ivanov , Ekaterina Aleksandrova
DOI
https://doi.org/10.30987/1999-8775-2020-8-28-32
Published
12.08.2020
Bulletin of Bryansk state technical university
SYSTEM OF AUTOMATED ASSEMBLY OF PARTS: ANALYSIS IN PHASE SPACE
Volume, issue
2016 № 4 Published
Authors
Svetlana Kuznetsova
DOI
https://doi.org/10.12737/23192
Published
28.12.2016
Bulletin of Bryansk state technical university
SIMULATORS FOR CALIBRATION OF TOOL CENTER OF INDUSTRIAL ROBOTS
Volume, issue
2017 № 1 Published
Authors
Krakhmalev Gennadiy , Dmitriy Petreshin , Oleg Krakhmalev , Pimonov Andrey
DOI
https://doi.org/10.12737/24891
Published
31.03.2017
Bulletin of Bryansk state technical university
DEVELOPMENT OF TECHNOLOGICAL PROCESS OF ELECTRO-EROSION PROCESSING
Volume, issue
2017 № 2 Published
Authors
Syanov Sergey
DOI
https://doi.org/10.12737/article_59353e29817a52.65253211
Published
30.06.2017
Bulletin of Bryansk state technical university
DEVELOPMENT OF FUNCTIONALLY-ORIENTED TECHNOLOGICAL PROCESS OF ELECTRICAL DISCHARGE MACHINING
Volume, issue
2017 № 5 Published
Authors
Syanov Sergey
DOI
https://doi.org/10.12737/article_59b11cb6918cc4.39698022
Published
04.10.2017
Bulletin of Bryansk state technical university
MACHINE UNIT ACCURACY ASSURANCE BASED ON COMMON MODULES TAKING INTO ACCOUNT JOINTS CONTACT STIFFNESS
Volume, issue
2019 № 3 Published
Authors
Aleksandr Fedukov , Alexandr Khandozhko , Evgeniy Polskiy , Andrey Shcherbakov
DOI
https://doi.org/10.30987/article_5c3db11190a975.91435272
Published
27.03.2019
Bulletin of Bryansk state technical university
EFFICIENCY INDICES OF METHODS AND MEANS IN AUTOMATED PARTS ASSEMBLY
Volume, issue
2016 № 4 Published
Authors
Aleksandr Simakov , Svetlana Kuznetsova , Aleksandr Rozhkov
DOI
https://doi.org/10.12737/23194
Published
28.12.2016
Bulletin of Bryansk state technical university
IMPROVEMENT OF HARD-ALLOY END COMPOUND MILLER
Volume, issue
2017 № 1 Published
Authors
Dmitriy Antipin , Boris Mokritskiy , Podoynitsyn Maksim , Mokritskaya Elena
DOI
https://doi.org/10.12737/24892
Published
31.03.2017
Bulletin of Bryansk state technical university
EFFICIENCY OF GAS-TURBINE CYCLE WITH STEAM INJECTION AND ANALYSIS OF ITS INTERACTION WITH WATER DESALINATION PLANT
Volume, issue
2017 № 2 Published
Authors
Abbas Naimi , Rassokhin Viktor
DOI
https://doi.org/10.12737/article_59353e29866621.06495477
Published
30.06.2017
Bulletin of Bryansk state technical university
ENERGY ASPECTS OF PARTS VIBRATING PROCESSING WITH KERNEL ORGANIC ENVIRONMENT
Volume, issue
2017 № 5 Published
Authors
Antonina P. Shishkina , Valeriy Lebedev , Mihail Chaava
DOI
https://doi.org/10.12737/article_59b11cb81c2ec6.01427420
Published
04.10.2017
Bulletin of Bryansk state technical university
MECHANISM WITH HIGHER KINEMATIC PAIRS
Volume, issue
2017 № 3 Published
Authors
Aleksandr Titenok
DOI
https://doi.org/10.12737/article_59b11cb94f5812.87880596
Published
02.10.2017
Bulletin of Bryansk state technical university
WAVY TOPOGRAPHY HETEROGENEOUS CUTTING AND DEFORMING TREATMENT WITH SURFACE-PLASTIC DEFORMATION
Volume, issue
2019 № 2 Published
Authors
Andrey Afonin , Anatoliy Larin , Aleksey Makarov , Evgeniy Martynov
DOI
https://doi.org/10.30987/article_5c3db110295005.79568346
Published
28.02.2019
Bulletin of Bryansk state technical university
DESIGN OF QUALITY MANAGEMENT PROCESSES BASED ON QFD METHOD
Volume, issue
2016 № 4 Published
Authors
Miroshnikov Vyacheslav , N. Borbats
DOI
https://doi.org/10.12737/23200
Published
28.12.2016
Bulletin of Bryansk state technical university
ALGORITHM OF AUTOMATED SYSTEM OF MACHINE UTILIZATION CONTROL IN SMALL-LOT PRODUCTION OF ELECTRONICS PRODUCTS
Volume, issue
2017 № 1 Published
Authors
Kropotov Yuriy , Dogadina Elena , Natalya Kholkina
DOI
https://doi.org/10.12737/24893
Published
31.03.2017
Bulletin of Bryansk state technical university
STRENGTH INCREASE IN STEEL 45, 40H AND 35HGSA BY DEFORMATION WAVE STRENGTHENING
Volume, issue
2017 № 2 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.12737/article_59353e2965a8c6.82426503
Published
30.06.2017
Bulletin of Bryansk state technical university
FORMATION OF ROTOR MOTION PATH USING NEURONET PROGRAMMING MODULE
Volume, issue
2017 № 3 Published
Authors
Aleksey V. Kornaev , Nikolay V. Kornaev , Elena P. Kornaeva , Leonid Savin
DOI
https://doi.org/10.12737/article_59b11cb9b0fc96.06905766
Published
02.10.2017
Bulletin of Bryansk state technical university
PECULIARITIES IN REDUCTION TREATMENT OF RAILROAD CAR WHEELS
Volume, issue
2017 № 5 Published
Authors
Boris Mokritskiy , Dmitriy Antipin , Yana Konyuhova , Mokritskaya Elena
DOI
https://doi.org/10.12737/article_59b11cbb105807.51899061
Published
04.10.2017
Bulletin of Bryansk state technical university
DIGITAL SPATIAL MODELS IN CLASSICAL APPLIED GEOMETRY
Volume, issue
2019 № 2 Published
Authors
Lidiya Nartova , Valeriy Bodryshev
DOI
https://doi.org/10.30987/article_5c3db1106e3a19.23518024
Published
28.02.2019
Bulletin of Bryansk state technical university
MODELING OF GENERATING SURFACES IN FEMALE MILLING CUTTERS WITH DESIGN RADIAL INFEED FOR MACHINING SHAFTS WITH HOMAXONIC PROFILE
Volume, issue
2016 № 4 Published
Authors
Mikhail Razumov , Marina Sidorova , Vadim Kuts , Yuliya Malneva
DOI
https://doi.org/10.12737/23201
Published
28.12.2016
Bulletin of Bryansk state technical university
GENERATION AND METHODS FOR VIBRO-ACOUSTIC ACTIVITY DECREASE IN GASCOMPRESSOR UNITS WITH GAS TURBINE DRIVE
Volume, issue
2017 № 1 Published
Authors
Drokonov Aleksey , Drokonov Aleksey
DOI
https://doi.org/10.12737/24894
Published
31.03.2017
Bulletin of Bryansk state technical university
EXPERIMENTAL INVESTIGATION OF CENTERLESS METHOD EFFICIENCY IN RACER STABILIZATION
Volume, issue
2017 № 2 Published
Authors
Andrey Balaev
DOI
https://doi.org/10.12737/article_59353e298d6dc0.98705619
Published
30.06.2017
Bulletin of Bryansk state technical university
STATIC LOAD CAPACITY OF SPHERICAL PLAIN BEARING
Volume, issue
2017 № 5 Published
Authors
Tikhomirov Viktor , Aleksandr Gorlenko , Mikhail Izmerov , Aleksander Erokhin
DOI
https://doi.org/10.12737/article_59b11cb8d75888.78880569
Published
04.10.2017
Bulletin of Bryansk state technical university
SIMULATION OF INDICATOR DIAGRAM OF AXIAL-PLUNGER HYDRO-MACHINE
Volume, issue
2017 № 3 Published
Authors
Andrey Puzanov , Evgeniy Ershov
DOI
https://doi.org/10.12737/article_59b11cb6b73246.75005655
Published
02.10.2017
Bulletin of Bryansk state technical university
POTENTIALITIES IN ADDITIVE-SUBTRACTIVE-STRENGTHENING TECHNIQUES
Volume, issue
2016 № 4 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.12737/23204
Published
28.12.2016
Bulletin of Bryansk state technical university
STEAM TURBINE DEVELOPMENT FOR SUPERCRITICAL STEAM PARAMETERS
Volume, issue
2017 № 1 Published
Authors
Kondrateva Ekaterina , Oleynikov Sergey , Rassokhin Viktor , Kondratev Aleksey , Osipov Aleksandr
DOI
https://doi.org/10.12737/24895
Published
31.03.2017
Bulletin of Bryansk state technical university
ASSESSMENT OF STEAM HUMIDITY INFLUENCE IN PRACTICAL PROBLEMS OF SEAL METERING CHARACTERISTICS DEFINITION
Volume, issue
2017 № 2 Published
Authors
Viktor T. Perevezentsev , Maksim Shilin , Dmitriy V. Gribanov
DOI
https://doi.org/10.12737/article_59353e29934cb3.42937924
Published
30.06.2017
Bulletin of Bryansk state technical university
ENERGETIC REGULARITIES OF PULSE LOADING BY SYSTEMS WITH INTERMEDIATE LINK
Volume, issue
2017 № 1 Published
Authors
Andrey Kirichek
DOI
https://doi.org/10.12737/24896
Published
31.03.2017
Bulletin of Bryansk state technical university
EXPERIMENTAL DEFINITION OF STATIC AND DYNAMIC CHARACTERISTICS OF BEARINGS WITH HIGHEST KINEMATIC PAIRS
Volume, issue
2017 № 2 Published
Authors
Aleksandr Titenok
DOI
https://doi.org/10.12737/article_59353e2997e975.41059576
Published
30.06.2017
© zh-szf.ru
Agreement Personal data protection and processing policy Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?